Question about 2001 Dodge Intrepid
The car just turns over like no fule or spark but the fule pmup is working just listen to it i got a code of 1282 and p1685 please help i am pg and i need my car please help
Tips for a great answer:
May 01, 2016 | 2001 Dodge Intrepid
Jan 24, 2015 | 2001 Dodge Intrepid
May 09, 2011 | 2001 Dodge Intrepid
Jan 07, 2011 | 1996 Dodge Intrepid
Jan 02, 2011 | 2001 Dodge Intrepid
Aug 10, 2010 | 2001 Dodge Dakota
Jul 14, 2010 | 2000 Dodge Intrepid
I have a problem with a 1999 Dodge Intrepid 2.7. Looking for some help or suggestions.
Problem: I only have a spark from the #2 coil.
Vehicle purchased from an Auction and would not start. The vehicle would only backfire. When I removed the valve covers I found that one of the rocker arms had popped out. I replace the heads with heads from a 2001 Intrepid 2.7. I used the cams, primary and secondary timing chains from the 1999 heads. Not sure if I used the original primary (left) cam sprocket from the 1999 or one I purchased in a kit from a Dodge dealership. I tried to use the new primary timing chain but it was not the same. The replacement heads were surfaced and a new head gasket was used. When I tried to start the vehicle it had no spark. The vehicle had set at several locations and parts may have been removed or changed.
I tried 4 ASD relays with no effect. I then tested all 4 on a 2002 Intrepid 2.7 that runs and all worked. I then discovered that the Crank PS has missing. I replaced the Crank PS with one from a 2002 Intrepid 2.7 with no effect. I then replaced the Crank PS with a Crank PS from a 1999 Intrepid 2.7 and got a spark at the #2 coil only. I then replaced the PCM and TCM from the same 1999 Intrepid I got the Crank PS from and still only have spark from #2 coil. I then changed the Cam PS, still spark only from #2 coil. I have tried several coil packs on connector #2 and all have spark. Each coil pack that sparks on #2 will not spark on any other connector. Spark from #2 coil is weak.
I then replaced the wire harness from the PCM to the coils and fuel injectors and still only have spark from the #2 coil. What am I missing? Any suggestions, advice or related information will be greatly appreciated!
Keith P. Richardson
May 20, 2010 | 1999 Dodge Intrepid
615 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: