Question about 1993 Chevrolet Suburban

1 Answer

1993 suburban is not starting and it is not the battery. What could it be?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

IF BATTERY CABLES OLD THEY WILL CAUSE POOR GROUND HIGH RESISTANCE IN STARTER CIRCUIT CAUSING STARTER NOT TO CRANK ENGINE.CHECK TO SEE IF DASH LIGHTS AND GAUGES WORK WHEN YOU TURN ON IGNITION SWITCH IF NO CHECK IGNITION FUSES.IF FUSES OKAY IGNITION SWITCH IS OPEN NEED REPLACING.NOW IF BATTERY VOLTAGE IS 12.6 VOLTS, BATTERY CABLES GOOD AND IGNITION SWITCH AND FUSE OKAY. STARTER SOLENOID OR STARTER FAULTY.REMOVE STARTER TAKE TO ANY AUTO PARTS STORE THEY WILL TEST STARTER.TURN OFF RADIO BEFORE REMOVING NEGATIVE BATTERY SO YOU WONT LOCK OUT RADIO.

Posted on Nov 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Chevy Suburban. Why does it want to start but doesn't turn?


If your saying the starter motor won't crank? Make sure the battery has a full charge and battery connections are all good. Then check the wiring circuits at the starter for voltage and ground. When testing at the starter make sure tranny is in park or neutral and the parking brake is set.

If it cranks good but won't start, have a helper crank it while you visually check for spark at the spark plugs. If spark everywhere, use a gage and check proper fuel pressure, also check fuel injector pulse. Can you check applicable trouble codes? How long since a tune-up?

May 29, 2015 | 1993 Chevrolet Suburban

1 Answer

So my 1993 chevy suburban won't start battery is good and starter is good I got a new ignition switch I got the old one out and I'm having trouble getting the rod to fit in the new one need some help in...


On Blazers, when you turn the key, it pulls the rod up and down. It is by where the tilt is. This rod usually has a bend in it so when you put the new rod in, you have to jiggle it a lot.

Nov 17, 2014 | 1993 Chevrolet Suburban

1 Answer

1993 Chevy Suburban will not start and has no spark


Check all fuses under the hood. Test the coil with an ohmmeter. Check for battery voltage on the coil primary with key on.
If all good, suspect the crank position sensor. A bad sensor will cause no spark.

Nov 19, 2013 | 1993 Chevrolet Suburban

1 Answer

I have a 1993 Chevrolet Suburban The engine (new) has been dragging (at times) when starting for a month or so. Now it will not turn over at all, nothing. The battery is good however it only reads 9 volts...


its a possibility that the alternator is shoot, and you do not have the power to turn engine over to start it. if battery is ok ! then get vehicle started. all accessories off,with it running you should have at least 14.2-14.7 voltage at battery. if you do not have a way to check this. auto-zone will check for free, as well as advanced auto.if all is ok, and the voltage running is less the 14 volts. replace alternator. good-day !

Sep 25, 2011 | 1993 Chevrolet Suburban

1 Answer

1993 GMC 1500 suburban 350 engine will not start. Engine starter turns, ignition does not fire.


i have a 1993 suburban gmc 1500. when i put the key in an turn it nothing happen at all.befor the car stop running it use to act crazy like start up in run great but when u turn it off it dont start back up. u wll have to wait than it will start..can u tell me what that can be..

Sep 13, 2010 | 1993 GMC Sierra

2 Answers

What size battery do I need for a 1993 chevorlet suburban


At napa it is a 7578,or a 78 series,it is the large ac style battery,with side post.has about 850 cold cranking amps.

Aug 17, 2010 | 1993 Chevrolet Suburban

1 Answer

My truck will not start without getting a jump. Do i need a new battery


check that the battery has 12 v if battery is more than 2 years old could need replacement with the correct size unit.

Jul 16, 2010 | 1993 Chevrolet Suburban

1 Answer

2003 suburban help!!


battery falt ,recharge the battery for 2/3 days and use jumper cables as well to help it start

Dec 03, 2009 | 2003 Chevrolet Suburban 1500

Not finding what you are looking for?
1993 Chevrolet Suburban Logo

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

83772 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...