Question about 1992 Toyota Pickup

1 Answer

No flashers or turn signals

We have a toyota pickup (box van) with no turn signals or flashers. We replaced the flasher relay under the dash, and still none. All the fuses seem to be OK. Before we changed the relay the 4-ways would make a loud buzzing noise when turned on, but now they make no noise. Any ideas what to check next?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 113 Answers

See if power is going through the switch

Posted on Jun 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My turn signals are NOT working, but emergency flashers are. Any ideas? They just went out today-- wondering if it's 1/ fuse 2/ turn signal relay or...?


Check for the FLASHER. For 1991 Toyota Truck Pickup 4WD (4 cyl) 2.4L FI 4cyl the Flasher is located front seating area, driver side, under dash, mounted driver side of steering column.

Hope this helps.

Feb 03, 2011 | 1991 Toyota Pickup

1 Answer

The Turn signals on my 1998 Toyota Corolla will not work they won't even show up on dashboard what is the problem?


Do the flashers still work? This sounds like a bad flasher relay problem.Locate the flasher for the turn signals and hazard lights. The flasher relay is under the dash near the steering column. It will be the larger of the square relays.Try wiggling it to see if turn siganls will work or emergency flashers will work. The relay should look like this jsmes1027.jpg

Nov 10, 2010 | 1998 Toyota Corolla

2 Answers

Where do i find the flasher for the indicator? the left light wont come on even thogh we bought a new bulb


Flashers and Relays REPLACEMENT Pickups The hazard warning flasher, on the pickup, is located to the left of the steering column, beneath the instrument panel, and is secured by a clamp and one screw. To remove it, simply unplug the electrical connector, loosen the screw, and slide the flasher out of the clamp. The turn signal flasher is located to the right of the steering column, beneath the instrument panel, and is secured in the same way as the hazard flasher. The turn the signal relay is located to the immediate right of the hazard flasher, and is secured by two screws. To remove it, unplug the electrical connector and remove the screws. MPV The relays and flashers are located under the dash, near the fusebox. Navajo Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel. The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel. prev.gif next.gif

Jul 15, 2010 | 1992 Mazda B-Series

2 Answers

My toyota 92 pickup truck turn signals don't work;


Try changing out your turn signal flasher.it might be under your dash by your fuse box.Some trucks have two one for turn signals one for 4 way flashers.By all means check the fuse first.

Mar 09, 2010 | Toyota Pickup Cars & Trucks

1 Answer

Which fuse is for flasher and turn signals on a 94 geo metro?


The hazard/turn signal relay (flasher) is located on top the the under dash fuse box. To replace the flasher, remove the fuse box retaining bolts and locate the flasher at the right rear corner. Pull gently to remove the flasher. Replace the one of like kind.

ea47ebe.jpg

The fuse box is located under the left side of the dash. Additional fuses are located in the fuse and relay box in the engine compartment.

Hope helped with this. remember rated this help, good luck.

Nov 23, 2009 | 1994 Geo Metro

2 Answers

Where is the flasher relay located for 1998 Toyota 4- Runner


Toyota Pick-ups, Land Cruiser, and 4 Runner 1997-00
Flashers -REPLACEMENT

The turn signal flasher is usually located in the convenience center, under the dash, on the left side kick panel. In all cases, replacement is made by unplugging the old unit and plugging in a new one.

Hope helped with this (remember rated this help) Good luck.

Nov 09, 2009 | 1998 Toyota 4Runner

1 Answer

Turn signal on lights stays on but doesnt blink


Its under the dash board on the left side (driver side). It's not in the same fuse box will be near it. If you get a replacement flasher relay you can see what the new one look like, just look underneath the dash match the relay and replace it fairly simple and make sure all the bulbs are good.

Oct 03, 2009 | 1998 Toyota Corolla

2 Answers

Flasher Relay location- 1998 Mazda B3000 pickup 4x4


it's basically a stand alone relay... most times... look for a relay by itself and often round. my ford winstars flasher relay was actually located in the fuse box under the drivers side dash. it was blue and larger then the other relays so that may be a clue to you.

Robert

Please take a moment to rate this solution

Feb 02, 2009 | 1998 Mazda Pickup

2 Answers

No flashers or turn signals


Try the fuse/breaker panel under hood, drivers side.

Jun 20, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
1992 Toyota Pickup Logo

474 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...