Question about 2005 Toyota Highlander

1 Answer

How to replace headlight bullb

For some cars its just a twist to unlatch it and this one I see 3 screws.Not really sure if I should remove those screws.Any suggestion.Thanks!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

Just hold that bulb and turn it on left and put new one same

Posted on Jul 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Need to replace right side low beam headlight on 2003 jeep grand cherokee. do i need to remove the battery?


the glove box , operators guide covers this,,, in most cars
seems its not , in the last free year published 2004
but is in the FSM, on mpage 8L-17
2003 WJ "lighting"
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

Rtm
excerpt: this is step 1, (step 3 is bingo)
25308090-43uikwyueni1btdprhgcswjj-2-0.gif

Dec 05, 2014 | 2003 Jeep Grand Cherokee

2 Answers

How do i access the low beam bulb on aVolvo V90 ?


inside the wheel well is most likely. Turn steering all the way the right and check wheel well on drivers side. you should see an access door

Aug 29, 2014 | 1998 Volvo V90

1 Answer

Changing headlights 2007 suzuki xl7


$4 to see it. can by or lease it for month too.
https://suzukipitstopplus.com/category/3-suzuki-service-manuals.aspx
on most usa cars this lamp is EURO style. (unscrews twistlocks)
try to see if you see back side of housing easy, from bay or below bumper , that is LOOK ! if you cant reach it, then you , cant. so..
yes< then just unscrew the lamp. its a twist lock.
on some cars, you must: (mine) 04 , PAGE 9b-5 fsm PAGE.
1; Remove grille
2: remove 3 screws from shell, do not touch the aiming screws !
4: pull harness plug.
5: remove lamp.
6 , reverse. above.

Feb 17, 2013 | 2007 Suzuki XL-7

1 Answer

How to replace headlights on 1989 toyota camry


1989 Toyota Camry

A little personal tip - if you get fingermarks on a halogen headlamp, you can wipe them off with rubbing alcohol (isopropyl alcohol) or, if you want to do what mechanics do, keep a number of 2X2 alcohol wipes in your automotive toolbox just to wipe off halogen headlight bulbs.

HEADLAMP REMOVAL & INSTALLATION

Sealed Beam Headlamps

See Figures 2 and 3

Before making a headlight replacement, make sure that the headlight switch is in the off position.

1. Loosen the screws, release the clips and remove the headlight door. To release the clips, insert a flat blade screwdriver into the jaws of the clip and pry on the jaws.

2. Remove the beam unit retaining ring screws and remove the beam unit.

Fig. 2: Headlamp door clip removal

3. Compress the lock releases and disconnect the wire connector from the headlight. If the connector is tight, wiggle it while holding in the lock releases and pulling out.

Fig. 3: Do not remove the adjusting screws when removing the head lamp sealed bulb

Never try to loosen the aim adjusting screws. If the screws are loosened, the headlights will have to be re-aimed by a qualified technician.

4. When installing, use only a sealed beam unit with the same part number and wattage.

Composite Headlamps

See Figures 4, 5 and 6

Fig. 4: Headlight bulbs are inside the sockets located in the engine compartment

Fig. 5: Detach the wiring from the back of the headlamp bulb

This procedure only applies to replaceable halogen headlight bulbs (such as Nos. 9004 and 9005); it does not pertain to sealed beam units.

1. Open the vehicle's hood and secure it in an upright position.

Fig. 6: Twist and pull the bulb out, but do not touch the bulb if it is still good

2. Unfasten the locking ring which secures the bulb and socket assembly, then withdraw the assembly rearward.

3. If necessary, gently pry the socket's retaining clip over the projection on the bulb (use care not to break the clip.) Pull the bulb from the socket.

To install:

4. Before installing a light bulb into the socket, ensure that all electrical contact surfaces are free of corrosion or dirt.

5. Line up the replacement headlight bulb with the socket. Firmly push the bulb onto the socket until the spring clip latches over the bulb's projection.

WARNING
Do not touch the glass bulb with your fingers. Oil from your fingers can severely shorten the life of the bulb. If necessary, wipe off any dirt or oil from the bulb with rubbing alcohol before completing installation.

6. To ensure that the replacement bulb functions properly, activate the applicable switch to illuminate the bulb which was just replaced. (If this is a combination low and high beam bulb, be sure to check both intensities.) If the replacement light bulb does not illuminate, either it too is faulty or there is a problem in the bulb circuit or switch. Correct if necessary.

7. Position the headlight bulb and secure it with the locking ring.

8. Close the vehicle's hood.

Fig. 1 - various automotive lamps

10_4_2011_8_32_12_pm.jpg

Fig.2 - Headlamp Door Clip Removal

10_4_2011_8_32_40_pm.jpg

Fig. 3: Do not remove the adjusting screws when removing the head lamp sealed bulb


10_4_2011_8_33_24_pm.jpg

Fig. 4: Headlight bulbs are inside the sockets located in the engine compartment


10_4_2011_8_33_51_pm.jpg

Fig. 5: Detach the wiring from the back of the headlamp bulb


10_4_2011_8_34_22_pm.jpg

Fig. 6: Twist and pull the bulb out, but do not touch the bulb if it is still good.

10_4_2011_8_34_49_pm.jpg

Oct 03, 2011 | 1989 Toyota Camry

1 Answer

Dirt inside my headlight


  • Open the hood of your Honda Civic, and identify the headlight assembly that has the dirt inside of it. Depending on the year of your Civic and side of the headlight, you may need to move the power steering reservoir to gain access to the light assembly.
  • 2 Squeeze the clips on both sides of the headlight assembly to release the headlight connectors. Use your fingers to loosen the headlight, and pull the small plastic tab to loosen the rubber gasket from the frame.
  • 3 Unplug the wiring harness from the back of the bulb. Twist the bulb, to remove it from the headlamp assembly.
  • 4 Locate, and remove, the screws that hold the headlight casing in place. Once the screws have been removed, gently guide the headlight casing from the location.
  • 5 Inspect the assembly under a bright light, identifying any cracks that may be in the casing. If there is a crack, use a silicone sealant to seal the crack.
  • 6 Dry the assembly, using a towel and or hairdryer.
  • 7 Replace the assembly back into your Honda Civic, and secure it by replacing the screws you removed.
  • 8 Replace the rear gasket where the bulb is inserted with a new gasket. Insert the bulb, and twist it into place.
  • 9 Reattach the bulb wiring harness.
  • 10 Turn the lights on, and re-aim the light assembly. good job your done

  • Dec 18, 2010 | 2004 Honda Civic

    1 Answer

    How do you replace the turn signal light in a 93 ford ranger


    The procedure is as follows:---First you need to open the hood and twist the bulb socket out from the lens.1)Remove the screws retaining the headlight and trim assembly.
    2)Carefully rotate the headlight and trim assembly away from the vehicle, rotating the inboard side away from the vehicle.
    3)Remove the side marker, parking and turn signal bulbs and sockets from the headlamp and trim assembly. They can be removed by turning them.
    4)If replacing a lens, remove the retaining screws for the lens to be changed and remove it from the headlight door.
    --------- Thanks.Helpmech.

    Dec 15, 2010 | 1993 Ford Ranger SuperCab

    1 Answer

    Changing headlight bulbs on 1987 911


    Hello there
    to replace light bulb you will need a phillips screwdriver.
    1.remove the outside ring.
    2.remove 4 small phillips screws and the whole headlight will come out.
    3.unplug the wireing connector and then twist the white nut on the light bulb and replace it.
    proporsche@yahoo.com

    Oct 27, 2010 | 1987 Porsche 911

    2 Answers

    Replace headlight on 1985 Nissan truck.


    I no longer need assistance. I all ready new about the plastic screws, and I managed to unlatch the one latch which was giving me a problem. The other latch easily opened. Thank you!

    Jan 05, 2010 | 1985 Nissan Pickup

    1 Answer

    How do you change the front turn signal bulbs on a 2001 Mercury Grand Marquis LS?


    open hood you will see a long black panel across the front. this panel is called a sight shield you will see 3 "twist clips" one on ether side of each head light and one right by the hood latch . twist all 3 and remove panel.at this point you will see the light sockets.each headlight assembly has 2 retainers. simply unlatch the retainers and the lamp assemblies come out easily and you have access to the bulbs.

    Dec 15, 2009 | 2001 Mercury Grand Marquis

    1 Answer

    Remove driver side headlight assy to replace side marker light


    There are two screws holding the headlight in. The screws are just above the headlight. After removing the screws you'll need to carefully pull straight out on the headlight assembly. There's a ball/socket type joint just behind the headlight. This joint needs separated for the assembly to come all the way ouit. Reaching and replacing the side light bulb requires a bit of arm twisting.
    Reverse the order to re-install the headlight.

    Sep 26, 2009 | 2002 Buick LeSabre

    Not finding what you are looking for?
    2005 Toyota Highlander Logo

    Related Topics:

    74 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    64052 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21990 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...