Question about 2005 Nissan Sentra

1 Answer

Service engine soon light

Code p 1138  swirl control valve what to do and what is it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Thisi s a problem my daughter had on her 2003 nissan and it was under a voluntary recall so if you bring it to dealer and tell them they have to replace swirl Valve free. It regulates the fuel. I have a 2005 nissan that had other engine codes and I have asked them to check swirl valve but I am getting run around from my dealer. Get it done at dealer asap or it can cause other problems with fuel system.

Posted on Jul 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do i get a swirl valve on 2004 nissan sentra 1.8 litter i cant find a swirl valve online or dealer?????????????


the 2004 sentra
correct not listed as
Swirl control valve position sensor online
none on ebay etc
if no other nissan vehicle part listing
to suit the sentra

possibly discontinued part
might need to source a used one from a wrecker

P1137 2004 Nissan Sentra Description Swirl control valve position sensor is installed on the intake manifold.
The sensor is connected to the front end of the valve shaft of the swirl control valve.
The sensor responds to the valve shaft movement. This sensor is a kind of potentiometer which transforms the swirl control valve position into output voltage, and emits the voltage signal to the Engine Control Module (ECM).

Read more: http://www.autocodes.com/p1137_2004_nissan_sentra.html4bf6e106-b12c-4708-a0aa-a43a76b546c2.png26336927-ejqivawmtgcmwob5fqfu0osj-1-2.jpg

Nov 01, 2016 | Nissan Cars & Trucks

1 Answer

Have a code P1138 on 2003 Toyota Tundra - how do I fix ?


Swirl Control Valve Control System Performance Repair Importance Level: 3/3 Repair Difficulty Level: 2/3 Possible causes - Faulty Swirl Control Valve Control Position Sensor - Swirl Control Valve Control Position Sensor harness is open or shorted - Swirl Control Valve Control Position Sensor circuit poor electrical connection - Faulty Swirl Control Valve What does this mean? Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P1138 Description While idling and during low engine coolant temperature, the swirl control valve closes, Thus the velocity of the air in the intake passage increases, promoting the vaporization of the fuel and producing a swirl in the combustion chamber. Because of this operation, this system tends to increase the burning speed of the gas mixture, improve fuel consumption, and increase the stability in running conditions. Also, except when idling and during low engine coolant temperature, this system opens the swirl control valve. In this condition, this system tends to increase power by improving intake efficiency via reduction of intake flow resistance, intake flow. The swirl control valve is operated by the Engine Control Module (ECM).

Read more: http://www.autocodes.com/p1138.html

Oct 02, 2016 | 2003 Toyota Tundra

1 Answer

Ford Escort P1405 Error Code


Are you sure you have EGR flow?? Hold the EGR valve open the engine should run poorly, if not you have no flow.

May 31, 2012 | 1998 Ford Escort

1 Answer

Fault code 1138. 1.8 engine. keeps coming up where is the sensor? what can I do to repair this defect?


MY 2004 NISSAN SENTRA SERVICE ENGINE SOON LITE COMES ON AND MY SENTRA RUNS FOR 3-4 MINUTES THEN DIES.

Oct 12, 2011 | 2004 Nissan Sentra

1 Answer

How do i fix p1130 AND P 1440 code on my 2000 Nissan maxima? It takes about 5-6 minutes to crank up.


P1130 Swirl Control Valve Circuit Malfunction - With Automatic Transmission Possible Causes
  • Check for air leaks in the Air Induction system (e.g., in the intake manifold)
  • Check for leaks or looseness in hoses and tubes between the intake manifold, vacuum tank and swirl control valve actuator
  • Check for leaks or looseness in the hoses between the air cleaner assembly and the swirl control valve vacuum check valve
  • Crankshaft position sensor (REF) signal problem
  • MAF sensor has failed (it may be dirty or contaminated)
  • One-way check valve has failed
  • Swirl control valve actuator has failed (it may be damaged or sticking)
  • Swirl control valve control connector is damaged (check pins for damage)
  • Swirl control valve circuit is open, shorted to ground or shorted to voltage
  • Swirl control valve has failed
  • PCM has failed
  • Throttle position sensor has failed
  • Vacuum tank has failed

P1440...EVAP Control System (Small Leak)
Check your fuel cap & reset code,

Good luck, hope this helps,,,

Jul 15, 2011 | 2000 Nissan Maxima

4 Answers

P1270 fault came up on scanner. to repair what is required please?


Well, FIRST before anything can be diagnosed or repaired, you need to read the codes again. Code P1270 is not a valid code for a 2005 Chrysler 300. This is a " vehicle-specific" code that applies to FORD vehicles as well as a few MAZDA and BMW vehicles. It has to do with the engine rev limiter system. CHRYSLER does not use this code...At least not anywhere I can find.

Jun 17, 2011 | 2005 Chrysler 300

1 Answer

Service engine soon light on


you may have a bad intake manifold anti swirl control unit or the vaccum valve, check all connection first and check for vaccunm leaks hope this helps.

Oct 08, 2009 | 2002 Ford F150 Regular Cab

1 Answer

MY CAR..


That is a swirl control valve code. The swirl control valve is on the intake manifold and unfortunately the only way to get the valve is to replace the entire intake assembly, it is not available seperately @ this time. You will have to purchase this and the gasket from you Nissan dealer. Hope this helps.

Aug 08, 2008 | 2004 Nissan Sentra

1 Answer

Swirl Valve


I have been working on a 96 nissan truck for three years for an evap code and swirl control , I finally just made sure the swirl control solenoid operated properly then disconnected the vacuum hose from the swirl control actuator and plugged it . code fixed.been driving 3 months, no code

Aug 07, 2008 | 1996 Nissan Pickup

Not finding what you are looking for?
2005 Nissan Sentra Logo

522 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...