Question about 2001 Chevrolet Monte Carlo

2 Answers

Monte carlo I have been told by the dealership that it could be a pressure sensor such as the control pressure solenoid or some other type of sensor that regulates pressure or shifting. Could these be possibilities?

Posted by on

  • wv gal Mar 08, 2009

    have a 2000 monte carlo.... abs ,trax off, check engine lights all on ,,,now its shifting great one time then the next shifting real hard in all gears.... anyone know what causes this ???

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

I had hard shift issues with mine after driving half hour and when ide shut it off for a minute it would shift smooth for a few miles, problem w as within the valve body. the needed modified or bored out some and the hard shift symptom was solved. at the time vehicle was covered by warranty and out of pocket it couldve costed nearly 2k

Posted on Dec 17, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Expert
  • 611 Answers

Transmission shift solenoid

Posted on Jun 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car stuck in park


    Help! Shifter stuck in park - Monte Carlo Forum - Monte Carlo ...

    montecarloforum.com > ... > Engine/Transmission/Performance Adders
    Jul 20, 2010 - I'm new here and desperately need some help with my 2006 Monte. ... ofpark. Tried rocking car back and forth but it seems to be the switch or solenoid that stops car from going into gear without ... 1984 Chevrolet Monte Carlo. Trans Stuck in Park - Monte Carlo Forum - Monte Carlo Enthusiast ...
    Apr 28, 2013
    gear shift locked up - Monte Carlo Forum - Monte Carlo Enthusiast ...
    Aug 17, 2012
    Getting stuck in park - Monte Carlo Forum - Monte Carlo ...
    Dec 12, 2011
    HELP!!!! My KEY is STUCK IN IGNITION - Monte Carlo Forum
    Jun 20, 2011
    More results from montecarloforum.com

Dec 16, 2015 | 2006 Chevrolet Monte Carlo

2 Answers

How will a 2006 monte carlo ls act if the oil pressure sensor is out


not too sure, but you can take it to autozone and scan it for free to find out

Sep 23, 2012 | 2006 Chevrolet Monte Carlo

1 Answer

Engine light code p0455 chev monte carlo


Hello,The problem is that the EVAP system is not able to achieve or maintain vacuum during the diagnostic testThe control module tests the evaporative emission (EVAP) system for a large leak. The control module monitors the fuel tank pressure (FTP) sensor signal to determine the EVAP system vacuum level. When the conditions for running the test are met, the control module commands the EVAP canister purge solenoid valve OPEN and the EVAP canister vent solenoid valve CLOSED . This allows engine vacuum to enter the EVAP system. At a calibrated time, or vacuum level, the control module commands the EVAP canister purge solenoid valve closed, sealing the system, and monitors the FTP sensor input in order to determine the EVAP system vacuum level. If the system is unable to achieve the calibrated vacuum level, or the vacuum level decreases too rapidly, the PCM will set the code you now have.So, you either have a stuck open purge valve, a stuck open vent valve, a false reading fuel tank pressure sensor, or a cracked/broken EVAP line.

Sep 21, 2012 | 2004 Chevrolet Monte Carlo

1 Answer

2002 chev monte thunk when shifting gears


Sounds like the Transmission Pressure Control Solenoid is bad. Have you had it scanned for codes? See if a code is stored in the PCM for Maximum adapt and long shift

May 28, 2011 | 2002 Chevrolet Monte Carlo

1 Answer

1996 monte carlo had codes P0341, P0441, and P1655 come up. help!!!! how much work or cost is this gonna be for me?


P0341: Its a Camshaft Position Sensor (CPS) $30 to $40
P0441: Evaporative Emission Control System Incorrect Purge Flow.
P1655: Evaporative Purge Solenoid Control Circuit. $18 to $24

Looks like you have an Emission problem and if you buy the parts and put them your self, Then it will be cheaper. Good luck

Jan 09, 2011 | 1996 Chevrolet Monte Carlo

2 Answers

I have a 2004 Monte Carlo. Have there been issues trying to fill the gas tank? I can't open up a gas nozzle as it stops like the tank is full. The gas just does not go down cleanly, backing up or...


You either have an obstruction in the filler tube or the vent tube on the filler is clogged so it is not allowing air to escape as the gas is going in.

Jan 08, 2011 | 2004 Chevrolet Monte Carlo

1 Answer

Have a 2001 monte carlo win a deck from another


if the dealership cant unlock it then it be better off getting an aftermarket one

Nov 03, 2009 | 2001 Chevrolet Monte Carlo

1 Answer

How do I reset the tire pressure monitoring system on my 2006 Monte Carlo after the tires have been rotated.


The use of a special GM reset tool is required.If you go to a Dealership they should be able to help you out.J-46079 is the number of the tool.

Oct 27, 2009 | 2006 Chevrolet Monte Carlo

1 Answer

98 Monte carlo Z/34 cranks immediately then cuts


start by check ignition module(controls spark) do fuel pressure check to see if pressure within specs

Oct 20, 2009 | 1998 Chevrolet Monte Carlo

1 Answer

1996 monte carlo fault codes po300, 441, 705,


THESE ARE FROM THE GM CODE DIFINITION MANUAL, U NEED TO TAKE THIS TO THE DELAER, U HAVE SOME SERIOUS PROBLEMS TO GIVE THIS MANY CODES.

P0300 - Engine Random Misfire Detected
P0441 - Evaporative Emission Control System Incorrect Purge Flow
P0705 - Trans Range Switch Circuit
P1106 - Manifold Absolute Pressure (MAP) Sensor Circuit Intermittent High Voltage
P1133 - Heated Oxygen Sensor (HO2S) Insufficient Switching Bank 1 Sensor 1
P1441 - Evaporative Emission (EVAP) System Flow During Non-Purge
P1662 - Cruise Lamp Control Circuit
P1672 - Low Engine Oil Level Lamp Control Circuit
P1870 - Transmission Component Slipping

Mar 24, 2009 | 1996 Chevrolet Monte Carlo

Not finding what you are looking for?
2001 Chevrolet Monte Carlo Logo

351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...