Question about 1993 Honda Civic 4 Door

1 Answer

Need help. how do i change my front head light bulb?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

Open the hood, and you'll have to reach around under/behind the headlight. Feel for the electrical cable going to the bulb. It should attach to the bulb with a round plastic hub that you can rotate to detatch and remove the bulb from inside the engine compartment. It's very tricky if you have big hands, and there's really no secret to doing it, just take your time and don't get frustrated if it takes a while.

Remember, when you can feel (it's really hard to see) the round plastic hub the wires connect to, gently but firmly rotate the hub until it detaches, then carefully pull the bulb out. Remove the dead bulb, insert the new bulb, and then gently reverse the process, being very careful when inserting the hub and bulb back into the headlight. Then rotate it the other way around and close the hood - you're done!

Good luck!

Posted on Jun 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Renolte megane 2 head light change right headlight


the steering lock needs to be put on full towards the opposite side, if your changing the drivers side put the lock on towards the passengers.


then remove the plastic cover under the wheel arch.


it will reveal another plastic cover which if rubber will just pull off, else twist off.
this will then reveal the bulb, pull out the cable which may need a bit of a jiggle.


the bulb should be held in place by a metal spring clip which needs to be pushed towards the front of the car and then outwards, this should release the bulb.






change the bulb it should be a 477

Jun 18, 2013 | Renault Cars & Trucks

1 Answer

Ant access front parking lights to change bulb


you need to open the bonnet and need to remove the bulbs in the head lights
replace with the new ones the bottom ones are the parking lights so change it correctly dont change the main lights

Feb 11, 2011 | 2006 Suzuki Swift

1 Answer

Changing front turn signal bulb


to change the front turn bulb if there are 2 screws you can unscrew them or if its fixed you will have to remove the front Grill including the plastic cover around the head lights to get to the back of the signal light and change the bulb

Jan 31, 2011 | 1996 Nissan Pickup

1 Answer

Changing the headlight on a 2006 pontiac g6


To replace the headlight bulbs.You need to remove the head light assembly out.The head light assembly is held by 2 to 3 three screws on each side. You need to remove those screws first.The front trim will get loose,the front trim is held by pins.The pins are of plastic and easy to release.Just release this pins and the front trim will get completely loose and can be easily taken off/. The head light assembly is in the front fender.Once the front trim is removed the head light assembly can be easily removed from front fender compartment.If its bit tight there,then you can use a screwdriver to give it a pull towards out.The head light bulbs can now be easily seen as well as easily removed now.Turn the bulb socket counterclockwise to remove the bulb from the bulb assembly. -------- Keep updated for any more queries.Thanks.

Oct 14, 2010 | 2006 Pontiac G6

1 Answer

How do i change the brake light on jeep liberty 2006?


1) You will need to open the rear swing door.

2) On the inside jam there are two torx headed screws (T-15's if I remember correctly).

3) Unscrew the two torx screws.

4) The light is now held by two mounting tabs (small spherical headed plastic sets that go through a rubber grommet).

5) You will need to pry the light casing off (easy pressure with a good size flat head screw driver will do the trick).

6) The light bulbs are twist mount settings inside the light casing.

7) Twist out the mount setting, change the bulbs, and reset the light mountings.

8) To put the light casing push the light casing back on and put in the screws. Everything else will work in reverse when it comes to assembling the whole unit.

2006 Jeep Liberty Replacement Light Bulb Sizes
Low Beam Headlamp Bulb Size: 9007
High Beam Headlamp Bulb Size: 9007
Parking Light Bulb Size: 2825 or 3157
Front Turn Signal Light Bulb Size: 3157
Rear Turn Signal Light Bulb Size: 3757ALL
Tail Light Bulb Size: 3157
Stop Light Bulb Size: 3157
High Mount Stop Light Bulb Size: 921
Fog/Driving Light Bulb Size: 9145 or H3-55W
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 3157
Front Side Marker Light Bulb Size: 168
Ash Tray Light Bulb Size: 161
Map Light Bulb Size: 578
Dome Light Bulb Size: 578
Step/Courtesy Light Bulb Size: 906
Trunk/Cargo Area Light Bulb Size: 578

Thank you for using fixya, and good luck

May 08, 2010 | 2006 Jeep Liberty

1 Answer

I have Hyunday Terracan and don´t know how to losen the front position light to chang the bulb. Need help.


There is a single screw that hold the position light assembly. This screw is located near the corner of the headlamp, on top, very close to the fender metal. Unscrew (phillips head) it and pry out (to the front) the position light assembly. Then you can change the bulb. Put back in reverse order.

May 05, 2009 | Hyundai Tiburon Cars & Trucks

1 Answer

Cannot take casing off front side light bulb, need to change the bulb. Peugeot Partner van '02


I want to change the side-light bulb on my Citroen Picasso off side front. I can get the near side one off, but find it difficult to turn the bulb holder inserted in the head light lens. Should I use some outside help like a HAMMER? Pete

Mar 31, 2009 | 2006 Peugeot 604

1 Answer

CHANGING HEAD LIGHT BULBS IN 2002 CHEVY S-10


Right behind the light there should be 2 clips pull up on those and the headlight will come out to change the bulb

Dec 13, 2008 | 2002 Chevrolet S-10

1 Answer

Change ford festiva front light bulb


Hello, the front light bulbs are easily changed by twisting the plastic holder in the back of the lamp that holds the bulb counter-clockwise. You turn it about a 1/4 turn and then it pulls out and you can switch bulbs. Do not touch the new bulb with your fingers because oil from your fingers will cause the bulb to burn out quickly.

Oct 20, 2008 | 1993 Ford Festiva

Not finding what you are looking for?
1993 Honda Civic 4 Door Logo

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...