Question about 1988 Jeep Wrangler

1 Answer

Motoring tyre weld how long or how far it will last in puncture repair

Posted by on

  • Ryan Sagen May 11, 2010

    could you please reprase the question?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

To the best of my knowledge, most "sealers" only work as "emergency" repairs. How well they work largely depends on the size and location of the puncture. There are several tire plugs I trust, the best being Bowes (available to repair shops) Again, depending upon size & location, sometimes it is wise to use a internal patch with re-enforcing cord built in. If the sidewall or area within one inch of sidewall on tread is punctured, that area flexes considerably and is prone to failure after repair. That requires replacement not repair.

Posted on Dec 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you fix a flat tire


there are a lot of quick fixes for tyres but generally anything sprayed into the tyre will not allow a proper repair
Replace the tyre with the spare and have a tyre shop carry out the repair. The case of the tyre has to drilled out to get the puncture repair plug in place and the rubber inside the case has to be perfectly clean so that the plug flap will adhere to the rubber for a good seal
anything you spry in will prevent this from happening
You may have to replace the tyre if you have been running on a flat tyre as the condition destroys the inner side walls.

Feb 13, 2015 | 2005 Toyota Prius

1 Answer

Where can I find the full service manual for Bmw x1 2011? Brake pad, disc replacement, suspension, steering system alignment and balancing etc... Also how to repair the punctured run flat tyre on Bmw x1???


Take the flat tyre to a tyre shop and have it repaired there as believe or not , puncture repair requires the correct tools and procedure for safety. As for the rest a good workshop manual should have that information or get a service hand book from the dealer service centre.

May 23, 2014 | Cars & Trucks

1 Answer

I have a 2006 Pontiac Vibe. The AC went out. When I took it to a repair shop, the guy told me that it looked like debris was puncturing the condensor. After 1 hot summer and spending $600 to replace the...


My experience with A/C Condensors is that you can take it to a Radiator Shop that welds aluminum and they can repair it by welding the hole closed. I had it done twice on my truck's condensor and it works great. To try and resolve the problem you can put some fine mesh screen in front of the condensor to keep debris from puncturing it.

May 13, 2011 | Pontiac Vibe Cars & Trucks

1 Answer

I have new Accent Excutive car, i just notiec that my car tyer type is Bridgestone S322 . My Question is its a Tube less tyre ? My car has all company fited tryes one of them show 175/170 R 13-...


putting a tube inside a tubeless tyre is a cheap way of fixing a puncture,BUT DO NOT EXCEED 75MPH,as, if the tube gets punctured,you could lose total control of the car......If you get a puncture with A TUBELESS TYRE YOU SHOULD ALWAYS replace it (how much is your life worth)Tyres have written on the wall wether they are tubeless or not.DO NOT MIX THEM,lastly NO MANUFACTURER fits tyres with tubes for road use.

Oct 18, 2010 | 2009 Hyundai Accent

1 Answer

I have a orange warning light flasing on my mini cooper 51 plate and i do0nt no wat it is can u help?? the symbol has a (!) on it? there is a button with the exact same symbol under my handbrake


This is the tyre pressure indicator. It shows that one of the tyres is losing pressure through a calve leak or puncture, or can also be triggered after you get new tyres or rotate the tyres.

The method to re-set the tyre pressure warning light is as follows:

Turn the ignition to position 2 (ignition on but motor not started). Press and hold the button under the handbrake until the warning light on the dashboard comes on for several seconds. Start the engine. Drive the car normally for several minutes. This will cause the system to re-set to the current tyres and pressures you have. It will then only turn the warning light on if the pressures change - for example if you get a puncture.

Oct 17, 2009 | 2002 Mini Cooper

1 Answer

I don't have an owners manual...TPMS indicator light just came on


hi from uk TPMS tyre pressure managment system ? this indicator may well be a simple tyre pressure under inflated ? for some reason ? slow puncture ? when were tyres last checked for correct pressures ? you should check routenely at least weekly ? not wait for indicator warning ? if you check pressures then try see if light resets ?

Oct 08, 2009 | 2008 Hyundai Sonata

1 Answer

Tyre puncture


this happend to me u should just be able to reset your computer .i have and itsnot happend since

Aug 27, 2009 | 2002 BMW 5 Series

2 Answers

Lost locking weel nut with a puncture how do i change it???


Depending on locking nut type.
If it's like mine, having a recessed "clover leaf channel" then you can only weld something to it like a bolt, if its an alternative nut type I.E. star or some other shape with edges, you can hammer a cheap socket over it and try that.(once the socket is shaped you can usually remve the rest and replace with new ones)

May 24, 2009 | 2001 Ford Focus

1 Answer

Warning light


As long as you have the correct tyre pressure , dont worry. The warning light depends on various factors

Jan 16, 2009 | 2006 BMW Mini

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...