Question about 2002 Toyota RAV4

1 Answer

Locate IAT sensor

I need to know where the IAT sensor is physically placed in a 2002 RAV4.

Can You help?

my e-mail is:

mariozeda@yahoo.com

Posted by on

  • marioz Jun 11, 2008

    Thanks a lot for your quick response. I believe I have found it with your instructions. Have a nice day.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 106 Answers

Hi

Follow the plastic intake tubing from the air box. You will first come across the MAF sensor which is located right next to the airbox. Keep following the tubing. You are looking for a small sensor plugged into the tubing. It should only have a two wire plug to it.

If you cant find it then look on the intake manifold itself, and if it is not there then it is built into the MAF sensor.

Regards

Geordie

Posted on Jun 11, 2008

  • Steven Adams
    Steven Adams Jun 11, 2008

    You're very welcome. I'm glad I could help. Thankyou for your accept and your rating.



    Anymore problems just click the ASK ME button below my very round faced avatar!



    Regards



    Geordie

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the IAT sensor on the 1993 corvette


Hi Terry:
The IAT sensor is a thermistor which supplies intake air temperature information to the PCM. The IAT is located in or near the air intake duct.

3_1_2012_3_27_41_pm.jpg

Fig. 1: On VIN 8 engines, the MAT (or IAT) is mounted in the intake plenum


3_1_2012_3_28_07_pm.jpg

Fig. 2: On most vehicles, the IAT sensor is threaded into the throttle body extension

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Mar 01, 2012 | Cars & Trucks

1 Answer

I need to locate and replace the IAT sensor on my 2002 Hyundai accent.


On newer vehicles, the IAT is often integral with the mass airflow sensor. Your dealership's parts department will be able to confirm this.

May 09, 2011 | Hyundai Accent Cars & Trucks

1 Answer

2002 Toyota Rav4....check engine light""is


Here are two of the most common causes of the check engine light.

Most common, MAF ( mass air flow ), sensor. A faulty MAF prevents the computer from determining the correct fuel/air mix ratio.

Oxygen sensor. ( front and rear, front meaning before the catalytic converter, rear meaning after the catalitic converter. The front measures the fuel/air mix being sent through the catalitic converter, the back measures the emmisions and lets the computer know if any fuel/air mix ratios need to be adjusted. Both of these can trigger the check engine light.

I hope this helps you.

Feb 02, 2011 | 2002 Toyota RAV4

1 Answer

I'm looking for the IAT sensor plug in my 2002 Toyota Land Cruiser. Does anyone know where it's located?


hi,


The Intake Air Temperature (IAT) Sensor is usually incorporated into the Mass Air Flow (MAF) sensor
u can see it on the following picture.ajin_g_3.gif
ok

Jan 05, 2011 | 2002 Toyota Land Cruiser

1 Answer

Wher is the IAT?


the iat sensor is located in the fresh air duct connected to the air filter in front of the fuse/relay control panel. to remove the iat sensor, renive the air filter cover and using a pair of wire cutters remove the small steel band holding the sensor in place. then by pulling on sensor it will come out. when replaceing sensor be sure to install new metal ring on new sensor to secure it in place.

Apr 28, 2010 | 2005 Dodge SRT-4

1 Answer

I need to know where my MAF/IAT sensor wires are on my 2002 V6 ford mustang


it's the sensor on the intake air duct come out of your air filter. the iat sensor is integrated with the maf sensor

Mar 13, 2010 | 2002 Ford Mustang

1 Answer

I need to locate IAT sensor four my 2009 ford


The IAT is integrated with the MAF sensor on the 09 Fusion. The MAF is located near the air box on all three engines. on the driver's side, and will be held to some part of the intake tubing by 2 torx screws. http://media.photobucket.com/image/2009%20Fusion%20MAF/itsamecameron/fusion4cylengineMAF.jpg 2.3L shown, 3.0 and 3.5 should be similar.

Oct 04, 2009 | 2009 Ford Fusion

1 Answer

Want to know which wire is the signal wire for a MAF/IAT sensor on a 2002 Mustang gt 4.6 ltr


both signals are at the far end of the plug iat is the gray wire maf is the gray with the red trace. let me know if this helps

Aug 26, 2009 | 2002 Ford Mustang

1 Answer

2002 chev avalanche mat sensor


I assume you are looking for the wiring for the IAT because MAT sensors are no longer used..

here you go

black / white - PCM ground
pink - fused 12-volts
yellow - MAF signal
tan - IAT sensor signal
black - IAT sensor ground

manifold temp. sensors are no loner used.

I believe you are looking for the IAT "intake air temp sensor" which is part of the mass air flow sensor.

good luck

wesleyschacht@hotmail.com

Jun 16, 2009 | 2002 Chevrolet Avalanche

1 Answer

2005 4RUNNER V6


Hi

I don't know what the wiring colours are in Puerto Rico, but if one of the wires is red then that is the input, and if there is a yellow wire with a green stripe then that is the IAT output.

Regards

Geordie

Jun 12, 2008 | 2002 Toyota RAV4

Not finding what you are looking for?
2002 Toyota RAV4 Logo

Related Topics:

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...