Question about Dodge Cargo

1 Answer

Need help getting brake lights running lights working

Good mornin',I need help please i have a 78 dodge motor home that I can't get the brake lights or running lights to work need to know which color wires go from under dash to brake lights and running lights thank you

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers

Before you do that check the fuses. If one is blown wire a flasher unit into where the fuse was and follow the loom. where you feel heat the problem will be. I have a strong feeling that both run off the same curcuit, and that your problem is in the tail light assemblies going to earth somewhere. Let me know Shaun.

Posted on Jun 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ram 1500 4x4 has abs and brake lights on computer says error code is 78. what can be the fix?


replace the brake pressure switch, this switch is located on the master i think, code 78 is brake foundation, the computer sees brake pressure switch feedback voltage low, this can be caused by a leak , so the pedal would sit low or sink or a bad connection to switch or switch itself, also make sure brake fluid is full. good day

Jul 26, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

Brakes locking up when it rains and truck slides..abs motor contines to run when truck is off..abs and brake light is on..checked brake shoes and they are still in good shape


if the abs light is on you need to get this checked on a diagnostic machine to find out where the problem is. you will have to change whatever the diagnostic tells you as parts are not servicable.

Feb 25, 2011 | Dodge Ram 3500 Cars & Trucks

1 Answer

Driving home, 2003 Dodge neon starts to slow down, oil light has come on intermittedenly before, engine started to lose power, brakes locked up, and steering wheel locked up. Car had to be towed. Thanks.


lets hope its not a bad motor from lack of oil pressure, the loss of brakes and steering is due to the engine stopped running this is normal, but hte oil light coming on with the engine running is not good, you will need to see if the engine spins and trys to start, this will tell you a little bit, if it spins then it didnt lock up, and maybe its a fuelpump or timing belt that let go, you will have to do some testing ,check for fuel pressure and spark at the plugs,

Jan 15, 2011 | 2004 Dodge Neon

1 Answer

Right side running lights not working


Remove light, look closely at bulb, also test ground if light looks good, use 12 volt test light ,see if getting power at light socket remember light switch has to be on ,PS there maybe more then one fuse for lights but it sounds like a bad bulb or ground on that one light . hope this helps ,please feel free to ask again. thank you.

Mar 29, 2010 | 1999 Dodge Intrepid

1 Answer

Brake lights dont work 2002 dodge durango


did you take a look at your fuses to see if one blew they should be jus below the steering wheel to the left

Oct 06, 2009 | 2002 Dodge Durango

1 Answer

My 2005 Dodge Diesel flashed Lampout on the way home this evening. Got home Checked all lamps were good. So i thought mabe it may flash a code, when i tried it flashed DonE then went out? Please help


Hi I'm litoshop, if the lamp out flashed then you have a light bulb that burned out check all the bulbs head light, parking lights, brake lights and signal lights, tail light, plate lights must likely one of those bulbs burn out good luck. if this information has been useful please let us know thank you.

Aug 04, 2009 | 2005 Dodge Ram

1 Answer

Will a 73 dodge 360 motor replace my 78 360 motor in my magnum


do hope this is only a sunday car,and your not polluting the air we all have to breathe by using it every day of the week.best of british with it cant help much as never seen one of these beasts,now putting a jaguar engine in a mini or an alfa engine in a ford anglia ??

Jan 15, 2009 | 1978 Dodge Magnum

1 Answer

Mitsubishi Pajero, 1999, DiD, Abs and brake light on, no brakes!!


2002 Montero has high pitch sound from dash and brakes are hard

Nov 12, 2008 | 2002 Mitsubishi Montero

Not finding what you are looking for?

Open Questions:

0 Answers

I am having trouble with my speedometer not working occasionally and now my seat belt light is coming on sometimes too. Is this the instrument panel cluster? Or something else? 1998 Dodge Neon. Backstory is as follows: -We take very good care of it and have one dedicated mechanic. -It has only had two owners; my parents and I. -We replaced the battery 2 months ago. -Mechanic checked to make sure the speedometer sensor was working. -We have had issues with the radio for years where it will randomly turn on and off, typically brought on by a stuffed trunk OR wet weather. -The speedometer works until we hit a bump and then the needle flies up and down or sometimes just stops working all together. -Mechanic has made mention of there being some Chrysler specific battery cable that is a smaller side cable and it is not in good condition. -Currently, my problem is that I can't find an old 1998 Dodge Neon in the salvage yard because yards are doing a lot of 2002 and newer vehicles and automatically crushing the others. The meat and potatoes of my question is what direction do I go in? And what of these symptoms ties to each other? And will adding new solder to the points on the panel fix it or is it something else? I'm trying to find least expensive to most expensive options and I'm rather handy but can't drop an engine or transmission or anything so keep this in mind. My handiness ends at resoldering the pins BUT I do have a mechanic I trust, but I fear that maybe I'm not combining symptoms properly. I have the money to repair an item I KNOW is wrong but not to chicken hunt around for problems.

Mar 22, 2017 | 1998 Dodge Neon

Cars & Trucks Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

67757 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22005 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...