Question about 1988 Mazda B2600 Cab Plus

1 Answer

Mazda B2600 Hi my fiance has a Mazda B2600 and at first the brakes did not work and now the tail lights dont work. Have changed the globes but this is not the problem Would this have something to do with loose wiring etc. Can somone please help me out and advise me of what to do Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 702 Answers

Under the dash is a brake light switch at the upper part of the pedal. This switch turns the brake lights on and off. As for the brakes not working, check you master cylinder and booster. It may need to be replace. These parts send the fluid to each wheel. If it's bad, the pedal is extremely mushy or not have pressure at all. Also check for wetness behind each wheel. You may have a fluid leak causing the same issue.

Posted on Jun 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake lights are not working but my back window brake light works and so do my tail lights and turn signals. 01 chevy malibu


if rear window stop light works has blown globes in other 2 tail and stop are different circuts fit 2 new globes only go in 1 way

Sep 16, 2013 | 2001 Chevrolet Malibu

1 Answer

Why wont the brake lights shine when pressing the brake pedal but the tail lights are working on the same bulb


test the brake light switch located at the brake pedal, disconect the switch & bridge the wires, turn ignition on if you have lights its a faulty switch (very common on ford falcons) if not check you have power at that plug, if power check the globes cause you could have blown globes as they are twin filiment globes (1 globe but 2 lights tail & brake) & the brake filiments might be blown.

Jun 26, 2012 | Ford Expedition Cars & Trucks

1 Answer

How to change front brake pads on a 91 mazda b2600


how to change disk break pads on 92 mazda bravo 4x4

Dec 04, 2011 | 1988 Mazda B2600 Cab Plus

1 Answer

Brake lights work but tail lights won't work with front lights which are needed at night on 2000 Chevy Malibu! When inspected, everything was fine until inspector changed my left tail light. Now tail...


The Tail lights and Instrument lights are usually on the same circuit so both will go out if the fuse for the circuit blows. Check for a blown fuse for this circuit and replace if out. If fuse continues to fail, check the tail light or side globes for a faulty globe and replace if necessary. Also check for any chafed wires that could be shorting to the body causing the fuse to blow.

Dec 13, 2010 | 2000 Chevrolet Malibu

1 Answer

My tail lights on my 1991 Astina dont work!


It would appear that it is a wiring problem, and I would guess that it would be the power supply wire since so many things are not working at the same time. You need to identify the wire that carries the power back and especially look for connectors since corrosion might be your culprit.

Jan 01, 2010 | 1991 Mazda 323

1 Answer

2006 Mazda 3 Hatch brake lights not working


ur breask switch may be not working or wire is loose....also check ur globes,,,,some globes carry 2 functions.....normal light and brake light,,,,,so i assume you brake light globes need checking

Mar 07, 2009 | 2004 Mazda 3

1 Answer

Mazda 3 tail light on, brake light not on


The bulb actually has two seperate elements in it.
That is why the tail light works fine.

If you take the bulb out you will see the seperate elements.
Change the bulb and it should be fine.

Jan 09, 2009 | 2004 Mazda 3

1 Answer

No brake lights - have changed fuse and globes


Follow your brake pedal arm under the dash until you find the little black switch with two wires on it, that is activated by moving the arm in and out.It may be a simple adjustment or replacement of that switch.If pushing the switch button doesnt make the tail lights work unplug and join the two wires to confirm that the switch is faulty.If joining the two wires doesnt make the tail lights work check that you have power at one of the wires,if no power you will need to find out why but im sure its just the switch needs adjusting.Good luck.

Nov 04, 2008 | Mazda B-Series Cars & Trucks

2 Answers

1989 Mazda MX5 - Right tail lights not working


check globe ,wiggle wires,check fuse clean light housing

Oct 05, 2008 | 1990 Mazda MX-5

2 Answers

1997 mazda protoge 1.8 engine


check the actual globe is not blown

Jun 30, 2008 | 1997 Mazda Protege

Not finding what you are looking for?
Cars & Trucks Logo

606 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...