Question about 1995 Audi A6

1 Answer

1995 Audi A6 engine problem

I have a 1995 Audi A6 2.8 quattro car. I have been having problems with it. When I engage the 'Drive' or 'Reverse' Gear, the vehicle vibrates until a accellerate more than 40 on my speedometer. I find it difficult to use it where there is hold-up as it vibrates until I have to press down the accellerator. But when is on express road I don't express that problem unless I slow down. The mechanic here said that when the first mechanic repairer worked on the overheating problems, they didn't fix the hose in the engines very well so air is not flowing properly in the engine. I thought that the gear box was bad, but he said that the gear box is very okay because it is selecting very well. The car doesn't have a manual and there's no way we can know how to reconnect all the hose. What do you think the problem really is and how can it be solved? Do you also have a diagram that we can look at to correct all the hose reconnection problems?

Posted by on

  • pages Jun 14, 2008

    Thank to so much for your email. The oil is in top shape and it the recommended oil for the gearbox. A mechanic repairer used some computers to read the gearbox and said is very ok. They are suspecting that the air hose are not well connected since the top cylinder was dropped. So the air is not circulating well. When you're on the highway were there's no traffic of holdup it moves well with the vibration, but when you slow down or accellerating at a slow pace, it gives such vibration when is changing gear or you engage it in the drive or reverse gear, but when you put the gear in Parking position or neutral the vibration stops, but the gear is very good because it changes very well. Any other solution?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check that the correct oil is in the gearbox - and in correct quantity. Sounds like there is too little oil in the converter.

Posted on Jun 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Traction control light on car jerks when you put it in gear 2001 Audi a6 Quattro what do I need to do to fix it


You will need the systems control module scanned for fault codes, when the light is on a code is in memory.

May 10, 2016 | 2001 Audi A6

1 Answer

My car shifts into gear then revs really high with no acceleration i have a 2001 audi a6 quattro... what does this mean? It reversed fine.


Likely the transmission has bands or clutch packs failing. Reverse is often unaffected. Have vehicle scanned and read the codes. You will likely have drive train codes in the P1700 and up range.

Oct 28, 2013 | Audi Cars & Trucks

1 Answer

Timing belt 1995 Audi A6 Quattro Sedan (4A2) V6-2.8L (AAH)


Timing belt routing diagram for 1995 Audi A6 Quattro Sedan (4A2) V6-2.8L (AAH)

I can not insert the picture here because bad page. Send me your e-mail address, and I will send you back the picture.

Jun 16, 2012 | Cars & Trucks

2 Answers

I have a 2001 Audi A6 quattro, 120k miles, check engine light came on a few months ago and code said it was O2 sensor, this past week when i drive the car engine sounds really loud like it is revving...


i have a 2001 Audi A6 quattro 95,000 miles when i change gear the car seems to over rev or keep reving when i put my foot on the clutch for a split second chould you tell me why is this

Jan 13, 2010 | 2001 Audi A6

1 Answer

I have A6 2.0 C4 1995..the engine wont start when hot


CAMSHAFT POSITION SENSOR

I have a 1995 AUDI A6 QUATTRO, and it had similar problems which the AUDI repair shop had to fix.

Dec 09, 2009 | 1995 Audi A6

1 Answer

I have an Audi A6 tiptronic quattro 3.0tdi which has no drive whatsoever in any gear and is not showing any faults when plugged in any idea.


need to get trans checked by knowledgeable machanic,maybe its not engaging because the selector isnt working,big money if incorrect diagnosis,but does need to be looked at by expert

Oct 27, 2009 | 2005 Audi A6

1 Answer

How to replace backup light switch Audi A6 Quattro 1995? How can I reach this switch?


This switch should be located on the side of the transmission and will have 2 wires coming out of it.

Aug 25, 2009 | 1995 Audi A6

1 Answer

1994 audi 100s transmission problem, cumputer, no reverse AUDI VW


Hi I also have an Audi Auto 2.8 non quottro had a simler problom and it turneed out to be one of the gear relays that are under the stering wheel on a left ****** that is.

Mar 11, 2009 | 1996 Audi A6

1 Answer

Problems with my 1995 Audi A6 QUATTRO


replace the coil pack, sounds like it is over heating.

Aug 09, 2008 | 2001 Audi A4

Not finding what you are looking for?
1995 Audi A6 Logo

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...