Question about 2002 Ford SVT Focus

1 Answer

2002 ford focus

How do i take off drum to rear brakes so i can replace brakes

Posted by on

  • Anonymous Jun 24, 2008

    Trying to change out the rear brake shoes on a ford fiesta 2001, I could do with a little help or advice with taken off and putting back on the shoes

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 56 Answers

You need to take off tires at hte back,you gonna see a big metal dust cover,take it off,then you gonnasee a big nut inside on it,that the one holding your drum,good luck and have fun

Posted on Jun 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 ford focus brake line.


If you have drum brakes in the back, they need adjusted out. If you didn't replace the drum you need to at least grind down the lip of rust at the edge of it. then adjust them.

Sep 24, 2016 | 2002 Ford SVT Focus

1 Answer

How do I get the rear drums off a 2000 Ford focus. I removed the spindle nut,


2000 Ford Focus Drum Removal ProcedureIf removing the drum to service the rear brakes: (note, do not remove hub retaining nut for this procedure)
1. Raise and support vehicle
2. Release the parking brake
3. Remove wheel and tire
4. Disconnect wheel speed sensor wiring harness from wheel knuckle and floor panel.
5. Remove 4 wheel spindle attaching bolts, then the wheel hub and drum assembly from vehicle.
6. Reverse procedure to install noting the following:
a. Torque wheel spindle retaining nut to 49 ft. lbs.
b. Torque wheel/tire assembly to 94 ft. lbs.
2000 Ford Focus Drum Replacement ProcedureIf replacing the drum and wheel bearing assembly:
1. Raise and support vehicle
2. Release the parking brake
3. Remove wheel and tire
4. Remove center dust cap.
5. Remove hub retaining nut.
6. Remove drum and hub assembly. Ensure wheel speed sensor ring is not damaged when removing drum/hub (if equipped).
7. Reverse procedure to install noting the following:
a. Inspect and clean wheel speed sensor ring if equipped.
b. When tightening hub retaining nut, rotate the hub assembly in counterclockwise direction.
c. Torque hub retaining nut to 173 ft. lbs.
d. Torque wheel/tire assembly to 94 ft. lbs.
e. Adjust parking brakes as necessary.


Jul 05, 2011 | 2000 Ford Focus

1 Answer

I have a 2002 ford focus and I cant get the rear drum off the back


IF IT IS DRUM BRAKES,YOU WILL HAVE TO GO BEHIND THE REAR DRUM AND ADJUST THE BRAKES TO ALLOW YOU TO REMOVE DRUM,PROBABLY A SPRING OR A ADJUSTER IS HUNG UP,IF YOU STILL CAN'T YOU WILL HAVE TO PRY THE DRUM OFF WITH A PRY BAR,ONCE YOU HAVE IT OFF REPLACE ALL HARDWARE AND SHOES.







TIM............

Oct 25, 2010 | Ford Focus Cars & Trucks

2 Answers

How do you take out the rear drums out of a 2002 ford focus zx3 i took out the four nuts in the middle of drum and still didnt come out


You may have to loosen the brake shoes. And also "bang" on the drum with a small sledge hammer. Generally the will be rusted on and may require a good amount of force.

Sep 05, 2010 | 2000 Ford Focus

1 Answer

How to remove the rear brake drum on a 2002 ford focus xtw


Ford Focus rear drums are held on by a nut in the middle remove the cap in the center and then remove the nut, new drums come with the bearing as well. IMPORTANT NOTE! ABS PICKUP NOT INCLUDED ON NEW DRUMS MUST BE REUSED FROM OLD DRUM.

Jun 30, 2010 | Cars & Trucks

1 Answer

Ajust hand brake on ford focus zetec


try to check the rear drums and shoes first.perhaps them make the problem.if ok try the site focushacks.com

May 18, 2010 | 2002 Ford SVT Focus

1 Answer

Rear drum brake noise on my 2003 ford focus. Just as I come to a stop the rear brakes make an embarising load noise. How can I fix this problem?


either the brakes need to be replaced or there is alot of junk built up inside. Either way rear drums need to be taken off, cleaned and shoes inspected for wear.

Jan 12, 2010 | 2003 Ford Focus

2 Answers

I need a diagram for the rear drum brake for 2002 Ford Ranger


Copy and paste this into your search window: 2002 ford ranger rear brake diagram

You should see four pictures pop up, select the brake parts diagram or the brake picture.

Sep 03, 2009 | 1993 Ford F150 SuperCab

1 Answer

Rear brakes 2000 ford focus zts


emergancy brake cable is froze holding the brake on

Mar 20, 2009 | 2000 Ford Focus

2 Answers

Removal of rear brake drum 2002 ford escape


make sure handbrake is off take wheel off hit the drum with a mallet not steel,as it will brake,hit on outter diametter face of drum, try and rotate as you twist off

Jan 05, 2009 | 2002 Ford Escape

Not finding what you are looking for?
2002 Ford SVT Focus Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...