Question about 2000 GMC Yukon

1 Answer

Turn signal clicker comes on intermittently irregardless of turn signal wand or hazard light position. Lights are not activated - only the clicking reminder.

Posted by on

  • asouza25 Jul 12, 2008

    have 1999 pontiac and the signal lights click after they are used.

    armand

  • Anonymous Jan 09, 2009

    My 2000 Yukon has over 130k miles, runs great, looks great, and yesterday developed this problem. I was thinking a fuse. I'll try the fuse/relay.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 374 Answers

The easiest possible solution to both of your problems would be to replace the signal/flasher relay in the fuse box- usually under $15.00. This should resolve the problem if it doesn't I advise having a mechanic trace down the short which mah lie in a circuit board.
Hope this helps you all.

Posted on Sep 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The flasher unit (turn signal and hazard) starts the clicking sound as soon as the ignition key is turned on.


sounds to me the switch is bad, as if its stuck in the turn signal position, could be the relay or blinker faulty. Replace the blinker/relay and if thats all good, its your turn signal switch.

Dec 16, 2013 | 2003 Hyundai Tiburon

1 Answer

Turn signal relay does not shut off


Try a new relay, the old one may just be faulty.

Nov 27, 2013 | Cars & Trucks

1 Answer

I have an 02 kia sportage. my signal lights come on but dont blink outside. no lights for the signal lights come on on the dash at all. also, no hazard lights.


If the 15A HAZARD fuse in the passenger compartment fuse box is OK, power is getting to the hazard function of the flasher unit. Pressing the hzard switch should cause the hazard lights to flash. HOWEVER, there is an electronic time and warning indication system module connected to to the hazard switch lead and that may be affecting things. If the 10A TURN fuse is OK, power is applied to the turn switch (with the engine in START or RUN) and you state you can select a right or left turn. HOWEVER, the RED/WHT and RED/BLU outputs from the flasher unit connect directly to the front and rear turn lamps and the instrument cluster turn indicators so you are not getting any flasher output. Again, that electronic time & warning indication system module could be affecting things

Oct 26, 2012 | Cars & Trucks

2 Answers

Turn signal clicker comes on randomly but doesn't affect lights


No the dash is the hazard light switch, it's also the turn signal flasher, dealer part only replace, replacing it will fix your problem. Feel the switch when you hear the clicking.

May 21, 2010 | 2004 Chevrolet Malibu

1 Answer

I have no signals and when brakes lights are on, lose brake light to either side turn signal is set on


Hi!!

If you activate the turn signal switch and you step on the brake pedal, the turn switch (on the steering column) deactivates the brake light to make the signal light more visible. The bulb for the stop and turn lights is the same.

Turn hazard lights ON. If they don't blink, replace turn/hazard flasher, If one or more lights don't come on, replace bulb.

Check fuse and circuit wiring for broken or loose connections. If all looks fine, check following:

If front turn lights work fine, check brake/turn bulbs.

If turn lights come on but don't blink, replace turn signal/hazard flasher.

If front and back turn lights don't come on, replace switch on column.

Let me know how it worked out, Good Luck

Mar 24, 2010 | 1991 Plymouth Acclaim

2 Answers

Tiburon 04, left turn signal lights stay on once activated by either turn switch, hazard light switch, or alarm. Can sometimes get them to go out by using right turn switch position, or playing with hazard...


replace the turn signal 'Clicker' also known as the turn signal relay. Most likely the problem unless you have a really wierd electical issue that will be hard to isolate...

Peace,

Jan 23, 2010 | 2004 Hyundai Tiburon

1 Answer

Turn signal clicker has a mind of its own


if you diconeect you will have no signals.
sometimes its the hazzrd swich sometimes its the signal light switch

Nov 21, 2008 | 2003 Volkswagen Golf

Not finding what you are looking for?
2000 GMC Yukon Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...