Question about 2005 Volkswagen New Beetle

2 Answers

Transporter 2005 hi my transporter is not starting, all the lights work the dash board comes on but no ignition, it is only 3 years old! please note it is not a beetle but a transporter!! is this a common problem with them? many thanks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Hi ya i had wat sounds like simalar prob on my transporter, the aa said it was a alarm wiring fault but i was told by a friend about the ignition , the same thing all lights and stuff up until i turned the key a further stage to start it and nothing, if you take your cowling off and remove the actual key mechanisim underneath ther is a black section that is prone to wear out , that belive it or not costs about £10.00 that wears out and causes this problem , i pulled my hair out over this , to check it put ur key in and turn it up until u start engine , make sure u r out of gear , lift bonnet then get some jump leads attatch to battery then to starter motor if it starts 90% chance its the black twirl cylinder i was on about any probs ask me

Posted on Oct 23, 2008

Hi there have you checked the 35amp fuse if ok you chould connect the starter motor direct "make sure its out of gear "and see if the starter turns. also a wee bit more info on the fault ??does the engine turn ??

Posted on Jun 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition switch on dodge dynasty?


I had a similar problem years ago. As long as your dash lights come on, it's likely you can use an external pushbutton switch to run the starter. There are likely just 4 wires on the ignition switch. Power from the battery, and switched to:
accessories
main car stuff (dash lights, ignition, signals, etc)
starter.
splice in wires from battery and starter to new switch, and you're good to go. This worked for years on my old car.

Jun 01, 2015 | 1992 Dodge Dynasty

1 Answer

Dash gauges not working


Hi Eileen,

Yes you have to inspect fuse board and i think the main fuse is the problem.

regards,
nuwan

Jan 10, 2014 | 2005 Ford Freestyle

1 Answer

Intermittent dash board problems


sounds like you have a grounding issue possibly a main grounding location. inconsistant grounding of the vehicles control module will cause erratic behaviours. check under the hood for ground locations containing multiple grounds at 1 bolt location.if different "experts" have attempted repair and failed chances are they are all looking in the wrong place.dash{interior of vehicle}..actual cause.{egine compartment or under side of vehicle..ie...ground locations.}good luck and safe motoring:>

Dec 22, 2013 | 2005 Audi A3

1 Answer

My Jimmy is having problems with starting if I turn the key it does not run until the dash lights come on but the dash lights don't come on all the time I hit the computer and then pulled on the wires...


Common Problem on the Jimmys, and Blazers is the ignition switch wiring Harness. The Engine will crank, you can try many times, then all of the sudden the dash lights come on , and the guages all work, it will start. I Have seen this problem 4 times, in my years of being a mechanic.

Jan 12, 2011 | 1997 GMC Jimmy

1 Answer

My car wont start


check all supply fuse, check your ignition switch, check front control module

Jun 20, 2010 | 2004 Chrysler Voyager

1 Answer

STARTER WILL NOT ACTIVATE


ignition switch had been replaced in 2005.(did not know this at time of question).we were using the old key in the new lock.when using new key problem solved.

Oct 16, 2009 | Ford Focus Cars & Trucks

2 Answers

Chevy S10 wont start


when u turn on the ignition does the light for the dash board turn off and when u release the ignition key back light for dash board come back. If this happens a battery poles are dirty or loose try cleaning and tighten good

Jul 24, 2009 | 2001 Chevrolet S-10

1 Answer

2002 Tahoe engine will not start


Electrical problems are difficult to diagnose in person without testing ...however, it seems that you may be loosing the body ground, causing power loss to the clock and likely the computer as well. As the starter is able to turn the engine, likely there is no problem with engine grounding. While cranking, the accessory side of the ignition switch should remain "hot" otherwise you would loose the clock every time you started it up. If it's not a ground problem, I'd look at the ignition switch itself to make sure it's not dropping power to ignition system while starter is engaged. on some vehicles this can also happen at the starter relay if an ignition bypass is used to provide hotter starting spark.

Jun 28, 2009 | 2002 Jeep Liberty

Not finding what you are looking for?
Cars & Trucks Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...