Question about 1996 Mitsubishi 3000GT

1 Answer

Transmission looking for a manual transmission 5 speed for mitsubishi gto/gt3000 engine number #6g72 model e-z16a

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Have you contacted reputable transmission companies that deal in 3000gt Getrag transmissions.
try Kormex or some others from this list
http://www.stealth316.com/1-links-t.htm#j7

Posted on Jun 23, 2009

3 Suggested Answers

james klgr
  • 362 Answers

SOURCE: i am looking for a 1983 pontiac acadian diesel isuzu transmission manual 5 speed

there is a junk yard here in KY that has a good 4 speed out of pontiac T-1000 they get 125.00 for them plus shipping its in pineknot KY

Posted on Jul 06, 2008

  • 1 Answer

SOURCE: mitsubishi gto h-reg twin turbo..reverse

Try the plastic guides for the gear selector failing that GTO are really bad for destroying gearboxes if it aint the clutch or clutch cylinder... To be honest i would say the box but go for the cheep option you may get lucky... good luck mine cost me 1300 to get repaired

Posted on Jul 13, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove an engine from 1999 mitsubishi challenger?


you want all 100+ steps????? and tools and ? photos.? really?
which engine?
3.0 L 6G72 V6
3.5 L 6G74 V6
2.5 L 4D56 TD I4
2.8 L 4M40 TD I4
3.2 L 4M41 TD I4

big differences with each.
where is the best place for information (not xxxx)
but
  1. the Factory FSM service manual.
  2. alldata.com (USA spec cars)
  3. any real mitsubishi forum.
google 1st hit.
http://mitsubishiforum.com/forum/

Jul 08, 2014 | 1999 Mitsubishi Montero

1 Answer

My 1996 legnum was jumping from 4th 2 3rd gear n back while accelerating,, lost all power...died n wont start again? help please.. there are no signs of any fluids leaking


Legnum?
Mitsubishi Legnum????
Mitsubishi Aspire
Mitsubishi MX/MF
Mitsubishi VRG
Mitsubishi VRM (Hong Kong)
9 engines offered, day 1.
and many trans,
4-speed automatic
5-speed manual
5-speed semi-automatic

Mitsubishi F4A23-2; 4 Speed
KM175, KM176, KM177 - F4A21-2 (176-5), K4A22-2 (175-5), F4A23-2 (177-8); ES Model
41TE
F4A33-1

the truth is , you didnt post country, nor engine size.
they match engine power to transmission (load rating)
so>? forget that.. that is for later.
IT DIED< so if the engine dont START the tranny issues are moot.
so does it crank.????
if it cranks , it next needs spark got spark to all cylinders.
that is if its not the Diesel engine, IS IT??





May 04, 2014 | 1996 Mitsubishi Galant

1 Answer

Ignition, will not start, no spark att all... The camshaft provider tested its ok, seems to be no electricity going To the provider...


    Types
  1. The 1993 Dodge transmissions could be found in the Caravan, Colt, Dakota, Daytona, Dynast, Intrepid, Ran Van, Ram Wagon, Ram Charger, Shadow, Spirit, Stealth, Viper and W150. Each had a unique array of transmissions best suited for the model's design.
  2. In 1993, the Dodge transmissions varied between 3- and 6-speeds. A 3-speed automatic transmission was available, and there was a variant that included overdrive. The only other automatic transmission included 4-speeds. A 5-speed manual gearbox found its way into several of the 1993 Dodge models, and a 6-speed manual was equipped in the Viper.
  3. The number of speeds and style of transmission may have looked the same on paper, but it did not mean they were all the same. An automatic transmission in a passenger sedan could be geared drastically different from one in a truck. Transmissions may have the same number of speeds, but they may not be geared identically.
  4. Transmissions were used in the 1993 Dodge to effectively transfer power from the engine to the wheels of the vehicle. The power could be passed to the front or rear wheels. Models equipped with all- and four-wheel-drive had power at all four-wheels.

Jan 08, 2011 | 1993 Audi 100

2 Answers

Did dodge make a 429 ci engine? i ask because the sticker on the valve cover on my 1`990 ram van says 429. thank you


hmmm... Have never heard of Dodge having a 429.. Ford made a 429, Dodge has the 440 and the 426 hemi.... unless they changed the bore and stroke for some models... which I think unlikely...


hold on... rereading your post... the only motors ever available in the caravan:
  • 1984–1987 2.2 L K I4, 84 hp (63 kW)
  • 1984–1987 2.6 L Mitsubishi G54B I4, 114 hp (85 kW)
  • 1987½–1990 2.5 L K I4, 100 hp (75 kW)
  • 1987½–1989 3.0 L Mitsubishi 6G72 V6, 136 hp (101 kW)
  • 1989–1990 2.5 L Turbo I4150 horsepower (110 kW)
  • 1990 3.0 L Mitsubishi 6G72 V6, 141 hp (105 kW)
  • 1990 3.3 L EGA V6, 150 hp (110 kW)


  • if it happens to be a '91 they added the 3.8l

  • 1991–1995 2.5 L K I4, 100 hp (70 kW) and 135 lb·ft (183 N·m)
  • 1991–1995 3.0 L Mitsubishi 6G72 V6, 150 hp (112 kW) and 173 lb·ft (235 N·m)
  • 1991–1995 3.3 L EGA V6, 162 hp (121 kW) and 194 lb·ft (263 N·m).
  • 1994–1995 3.8 L EGH V6, 162 hp (121 kW) and 213 lb·ft (289 N·m).


  • Peace,

    Mar 06, 2010 | 1990 Dodge Grand Caravan

    1 Answer

    Need troque valve for main bearing and piston rod motor 6G72 3000 ?


    The info I have at had shows 60ft pounds for the Main Bearing Cap Bolts & 34ft Pounds for the Connecting Rod Bearing Cap nuts. For Bearing cap the sequence is as follows: When looking at underside of engine (bearing cap or Mono-block) and front of engine (harmonic balancer) to your left.

    8 - 4 - 1 - 5

    7 - 3 - 2 - 6

    I hope this may have helped,
    Tom

    Oct 16, 2009 | 1994 Mitsubishi Montero

    1 Answer

    91 mitsubishi gto has random engine cut out.


    Does this car have its original ECU? I ask this because this and a number of early 1990s Mitsubishi cars/truckas had isses with capaciors leaking. In truth I believe it is a matter of when and not if. As the ECU begins to fail the engine can begin to run poorly ( I speak from experience after changing both ECUs in my Montero and my son's Doge Stealth (3000GT) ) I did have an issue too with my son's Stealth running poorly, by good luck I happened to be looking under the hood with poor lighting and noticed a faint blue spark from the wiring leads by the coil after a good look I fould a wire would ground out when the engine was throttled; this caused the engine to torque slightly causing the wire to rub and finally ground out.
    I hope this may have helped,
    Tom

    Oct 10, 2009 | 1991 Mitsubishi 3000GT

    1 Answer

    How much transmission fluid does my 2005 2.0 get.


    2.0 Liter , Engine code (E)4G94Automatic Transmission, F4A4B-1 Initial Fill..........5.1 liters Automatic Transmission, Total Fill  4 speed F4A4B-1..........7.7 liters
    Manual Transmission, ..........2.2 liters

    2.0 Liter turbo, Engine code (D) 4G63 Turbo Manual Transmission, 6 SPD - W6MAA..........2.8 liters
    Manual Transmission, 5 SPD - W5M51..........2.2 liters
    Transfer Case,..........0.600000023841858 liters

    Aug 18, 2009 | 2005 Mitsubishi Lancer

    2 Answers

    Difficulty in gear selection


    Drain your transmission fluid (24mm drain plug) and refill with a GL4 rated transmission oil such as REDLINE MTL or MT90 (filler plug is the 17mm nut on the front of the transmission). 3000gts have copper synchro mesh plates that are eaten up by regular transmission fluid. When you drain your fluid, check to look for metallic particles, you are probably destroying your synchro mesh. Change fluid and run it in.

    Jul 13, 2009 | 1991 Mitsubishi 3000GT

    2 Answers

    Where can i find the transmission model number for my 95 jeep grandcherokee lerado the transmission is not original it has been replaced with a diferent one 2 times so just need to know where to find the...


    These pages cover the transmissions used in Jeeps over the years. Transmissions are arranged by the most recently introduced transmissions first.
    Factory Transmissions 45RFE: The 45RFE four speed automatic transmission was used in 1999 Jeep Grand Cherokees with 4.7L engines. 46RE: The 46RE four speed automatic transmission was used in 1998 Jeep Grand Cherokees with 5.9L engines.
    44RE: The 44RE four speed automatic transmission was used in 1996 to 1998 Jeep Grand Cherokee's with 5.2L engines.
    42RE: The 42RE four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.
    46RH: The 46RH four speed automatic transmission was used in 1993 to 1995 Jeep Grand Cherokees with 5.2L engines.
    32RH: The 32RH three speed automatic transmission was used in 1992 to 1995 Wrangler with 4.0L engine and it continues to be used in 1997+ Wrangler with 4.0L engine.
    30RH: The 30RH three speed automatic transmission was used in 1992 to 1995 Wrangler & 1992 to 1996 Cherokee with 2.5L engine.
    AW4: The AW4 four speed automatic transmission was used in 1987 to 1990 Jeep Cherokee (XJ), & Jeep Comanche with 2.5L & 4.0L engines. The AW4 was also used in 1987 through 1992 Jeep Comanche & 1991 through 1998 Jeep Cherokee & 1993 through 1993.5 Jeep Grand Cherokee with 4.0L engines.
    AX-15: The AX-15 is a medium duty 5 speed manual transmission. It was introduced in mid 1989 in YJs with the 4.2L engine and XJs and MJs with this engine. The first year of the Grand Cherokee (ZJ), the AX-15 was rare option only with the 4.0L engine. The AX-15 is still used in TJs and XJs with the 4.0L engine.
    AX-5: The AX-5 (and AX-4, the non-overdrive version) is a light duty 5 speed manual transmission. It was used in all Wranglers from 1987 equipped with the 2.5L I4 engine. It was also used in Cherokees (XJ) and Comanches (MJ) with the 2.8L V6 and 2.5L I4.
    BA10/5: The BA 10/5 is a light duty 5 speed manual transmission. It was used in all 4.2L equipped Wranglers (YJ) from 1987 to mid-1989, and all 4.0L Cherokees (XJ) and Comanches (MJ) for the same years.
    T-5: The T-5 is a light duty 5 speed transmission used in CJs from 1982 until 1986. It was also found in some 84-85 Cherokees (XJ).
    TF727: The TF 727 is a heavy duty 3 speed automatic used in full sized Jeeps (SJs and J series pickups) from 1980-1983. From 1984-1992 the 727 was only used in these trucks with the AMC 360 V8.
    999: The 999 is a medium duty 3 speed automatic used in CJs from 1980-1986. It was also used in 1984-1990 SJs and J pickups with the 4.2L engine, in the YJ from 1987-1991 with the 2.5L and 4.2L engine, and in the XJ and MJ through 1986.
    904,909: The 904 and 909 are light duty 3 speed automatic used in CJs from 1980-1986 only with the I4 engine. It was also used during this time period with XJs and MJs with the I4 and V6 engine. The 909 is a 904 with a lock-up torque converter.
    SR-4, T-4: The SR-4 and T-4 are light duty four speed manual transmissions used in CJs from 1980 until 1986.
    T-176, T-177, T-178: The T-176, T-177, and T-178 are a medium duty four speed manual transmission used in Jeep CJs, SJs, and J pickups from 1980-1986.
    T-150: The T-150 is the 3 speed manual transmission that was used in CJs from 1976 to 1979.
    T-18: The T-18 is a heavy duty four speed used in Jeeps from 1971 until 1981. It was only used in the CJ from 1971-1979.
    T-15: The T-15 was used only in V8 equipped CJs and Jeep trucks from 1972 to 1975.
    TH400: The TH 400 is a heavy duty three speed automatic that was used in CJs with the BW 13-39 transfer case from 1976-1979. The TH 400 was also used in full sized Jeeps (SJs and J series pickups) from the late 60s until 1979.
    T-14: he T-14 is a three speed transmission used with the "Dauntless" Buick V6 and AMC I6 from 1967 to 1975.
    T-86: The T-86 is one of the three speeds used with the many CJs and Jeepster Commandos with the "Dauntless" Buick V6.
    T-98: The T-98 varies only slightly from the T-18. It was used from the 50s until 1970 in different Jeeps.
    T-90: The T-90 was the standard three speed for CJ and their military counterparts built from 1945 until 1971. It was also the standard transmission for Willys Wagons, Willys Pickups, FC trucks, and Jeepster/Commandos during this time period.
    T-84: The T-84 is a light duty three speed used in MBs and GPWs during WWII

    Good luck!!!

    Jun 26, 2009 | 1995 Jeep Grand Cherokee

    1 Answer

    Lifters


    Its a common problem on the eclipse and 3000gt.

    click HERE for a complete guide to checking and repairing the lifters (actually "lash adjusters")

    you can download the engine repair manual by clicking this link: 6g72 engine manual PDF

    Dec 06, 2008 | 1992 Mitsubishi 3000GT

    Not finding what you are looking for?
    1996 Mitsubishi 3000GT Logo

    Related Topics:

    334 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mitsubishi Experts

    yadayada
    yadayada

    Level 3 Expert

    63291 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21981 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...