Question about 1999 BMW 5 Series

1 Answer

Engine stopped The car 5281 1999 model, driving engine just stopped we had lights and the engine turns but does not start.

Posted by on

  • Shickn Jun 11, 2008

    Information was confirmed by the BMW service department when the car was taken to them to be repaired. The fuel pump had died.

    Thank You for Your response.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 702 Answers

Check to see if you have fuel and spark. If you have fuel and no spark, check your crank position sensor. I had one in my shop very similar to yours. When you turn the key to "on" position, do you hear the fuel pump come on? You should hear a hum for a couple of seconds.

Posted on Jun 09, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't my car want to start?


Your year--make--model would help? Is your engine seized? The oil level may be fine, but, what about oil pressure?

Dec 26, 2017 | Cars & Trucks

1 Answer

What does the MIL code "PO 320" mean, please?


code p0320 refers to cam shaft position (CKP) sensor/engine speed (RPM) sensor--circuit malfunction=== causes --wiring--CKP/RPM sensor ---ECM
because the engine runs ok until it is on cruise control I would be investigating the RPM sensor for a fault
The cruise control takes its control from the RPM sensor and if that circuit is interminable the the cruise control doesn't know what rpms to maintain.

Jan 29, 2015 | Cars & Trucks

1 Answer

All the lights flash but the engine will not start


Find the security system and write down the make and model. Use internet to find owner's manual, or how to disable the system.

Jul 12, 2017 | 2004 Toyota Matrix

2 Answers

Wont shift


possable bad brake lite switch. also check fuses.

Nov 21, 2012 | 1995 Ford Taurus

1 Answer

After long drive 30,40 km when car stops on traffic lights loose power 2010 outlader


is your check engine light on it could be anything from fuel to emissions

Aug 01, 2012 | 2010 Mitsubishi Outlander

1 Answer

Beetle engine just turned off while driving


start by getting a code read,it could be cranksensor or a fuel related issue,give me the codes and i will be able to help,the pd engines are very reliable and dont give many problems

Dec 29, 2008 | 2003 Volkswagen Beetle TDI

1 Answer

My beetle just engine just went off while driving


Make sure the battery terminals are secure. Other than that I would guess there is an electrcal fault on the vehicle. I am not familiar with the beetle but think if I were driving your vehicle I would make sure all electrical connections were as they should be.

Apr 11, 2017 | 2003 Volkswagen Beetle TDI

Not finding what you are looking for?
1999 BMW 5 Series Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Doberman

Level 2 Expert

254 Answers

dhnguyen

Level 2 Expert

281 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...