My front blower and the radio dont work, first the blower stopped working while driving, then a few weeks later the radio stopped working while driving, the fuse for the radio is burnt but when i replace it the new one burns as i put it in its place. any body that could help with this would much appreciated. thanks

If the fuse blows right as soon as it is pushed in , you have a dead short to ground . Just from reading your post , i gather you have no clue about automotive electrical systems an circuit's . I have thrity years experience diagnosing automotive electrical problem's ! It is my professional opinion that you should take your vehicle to a qualified repair shop , one that specializes in automotive electrical system's repair . To fix this could mean taking part's of your vehicle apart to access wire harnesses , suppose the problem was behind the instrument panel an it had to come out to get at the harness ? Need special tool's , wiring diagrams , harness routing information , not to mention knowledge. Do you know what a wiring diagram is ? How to use it to pin point locations in a electrical circuit for testing ? Know what a DMM - digital multi-meter is ,an how to use it ?
Free wiring diagrams here http://www.bbbind.com/free_tsb.html

Enter vehicle info. year , make , model an engine size. Under system click on HVAC ,then under subsystem click on HVAC controls . Then click the search button , then click the first blue link . This is a diagram of the front blower electrical circuit . I believe this is a seperate problem from the blown fuse problem . This could just be a relay or resistor or the blower motor is bad . Try your hand at this first , buy a cheap multimeter an test the B+ voltage through the circuit , from the relay to the fuse , to the blower motor ,an so on . Watch these video's

Electric Testing Techniques You Need to Know
The Trainer 32 How To Read An Automotive Block Wiring Diagram
Fox and Hound FF310 by GTC Tutioral