Question about 1995 Chevrolet S-10 CA Edition

1 Answer

Radiator Replacement Instructions

Where can I get the on-line Radiator Replacement Instructions for my 1995 S-10 Blazer with 4.3L engine with
engine Oil &
transmission Oil coolers?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 119 Answers

Go to www.autozone.com.
Click on REPAIR INFO.
Click on VEHICLE REPAIR GUIDES.
Input year, make , and model.

Posted on Jun 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove radiator on 2000 Lincoln Continental


RADIATOR
Removal
1. Disconnect battery ground cable.
2. Drain engine cooling system as described.
3. Remove engine air cleaner.
4. Remove upper radiator hose from water bypass tube.
5. Remove radiator overflow hose from radiator and fan shroud.
6. Remove transmission oil cooler line from oil cooler inlet fitting.
7. Remove nuts retaining A/C condenser core to the radiator.
8. Disconnect engine control sensor wiring from the auxiliary electric cooling fan motors and the CCRM.
9. Raise vehicle on hoist.
10. Remove splash shield from lower radiator support and front sub-frame.
11. Remove lower radiator hose from radiator.
12. Remove oil transmission cooler line from oil cooler outlet fitting on radiator.
13. Remove retaining screws for power steering/transaxle oil cooler and position cooler aside.
14. Support fan shroud, radiator and A/C condenser core with a suitable jackstand. Remove lower radiator
support.
15. Position jackstand aside and carefully remove radiator and fan shroud.
16. Remove two retaining bolts for fan shroud at top of radiator and remove fan shroud from radiator.
17. Remove upper radiator hose from radiator.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
18. Remove the radiator.

Oct 21, 2016 | Lincoln Cars & Trucks

1 Answer

How do I change the radiator on a 96 lincoln contiental 32v intech V8 ?


RADIATOR
Removal
1. Disconnect battery ground cable.
2. Drain engine cooling system as described.
3. Remove engine air cleaner.
4. Remove upper radiator hose from water bypass tube.
5. Remove radiator overflow hose from radiator and fan shroud.
6. Remove transmission oil cooler line from oil cooler inlet fitting.
7. Remove nuts retaining A/C condenser core to the radiator.
8. Disconnect engine control sensor wiring from the auxiliary electric cooling fan motors and the CCRM.
9. Raise vehicle on hoist.
10. Remove splash shield from lower radiator support and front sub-frame.
11. Remove lower radiator hose from radiator.
12. Remove oil transmission cooler line from oil cooler outlet fitting on radiator.
13. Remove retaining screws for power steering/transaxle oil cooler and position cooler aside.
14. Support fan shroud, radiator and A/C condenser core with a suitable jackstand. Remove lower radiator
support.
15. Position jackstand aside and carefully remove radiator and fan shroud.
16. Remove two retaining bolts for fan shroud at top of radiator and remove fan shroud from radiator.
17. Remove upper radiator hose from radiator.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
18. Remove Radiator

Apr 19, 2015 | 1996 Lincoln Continental

1 Answer

My 2001 GMC Jimmy needs to have the oil cooler lines replaced but I'm confused as to which assembly I need to get the lady at Schucks Oreillys said it's either the lines that go from the transmission to...


The oil lines going to the radiator is your transmission cooler lines, you will look for a smaller radiator and its connections, usually connected using an oil filter adapter.

Dec 13, 2013 | Cars & Trucks

3 Answers

We need to know if the radiator has an enigine oil cooler in it so we know which one to buy


if you get under the car on the driver side were the oil filter is and look were the filter screw onto the motor,if you see 2 large lines coming from the plate that the filter screws onto going to the front of the motor and attach to the lower rad then you have an engine oil cooler in the radiator.there will be lines that come from the transmission to the radiator that are considerably smaller.

Sep 16, 2011 | 1994 GMC Safari

2 Answers

I have a 1997 4x4 blazer 4.3L, and I would like to have an exclusive oil transmission cooling system instead the actual beside-inside the water cooler radiator. So, I want to know wich of the following...


Transmission Fluid gets changes every 30,000 miles
on all vehicles

You can by pass the radiator cooler and put a trans
cooler in front of the condenser

Lot of work making the brakets and making it nice

The approx 7"x11" stacked plate cooler is what you
want,not the cheap tube and aluminum fin junk

Use Power Steering Cooler Hose,not fuel line

Mar 15, 2011 | Chevrolet Blazer Cars & Trucks

2 Answers

Antifreeze is spraying from right above the transmission pan...right where the two lines run from the radiator all the way to that area..


Hi, the leak is actually transmission fluid, and it sounds like the transmission cooler lines need replacement. You should not drive this, as transmission damage could occur. Good luck... Coop

Jan 01, 2011 | 1994 Chevrolet S-10 Blazer

1 Answer

How to change Radiator in 1999 Chevrolet Monte Carlo Radiator


Hello, here are the instructions for rad replacement

  • Remove air cleaner assembly and the throttle body air inlet duct. .
  • Drain the coolant.
  • ).
  • Remove the engine strut brace bolts from the upper tie bar and rotate the struts and braces rearward. Refer to one of the following:
  • • Engine Mount Strut Bracket Replacement in Engine Mechanical - 3.1L • Engine Mount Strut Bracket Replacement in Engine Mechanical - 3.8L
  • Remove the electric cooling fans.
  • Remove the radiator bracket bolts and the radiator brackets.
  • Use the J 38185 in order to reposition the hose clamp at the radiator inlet hose.
  • Disconnect the radiator inlet hose from the radiator.
  • Use the J 38185 in order to reposition the hose clamp at the radiator outlet hose.
  • Disconnect the radiator out let hose from the radiator.
  • Remove the coolant level module.
  • Disconnect the transaxle oil cooler pipes from the radiator. Refer to one of the following:
  • • Automatic Transmission Oil Cooler Pipes Replacement in Automatic Transaxle - 4T60-E • Automatic Transmission Oil Cooler Pipes Replacement in Automatic Transaxle - 4T65-E.
  • Remove the transaxle oil cooler pipes from the retainer at the bottom of the radiator.



  • Remove the radiator.
  • 9e65ca5.gif

    Jun 12, 2010 | 1999 Chevrolet Monte Carlo

    2 Answers

    Does my 1997 blazer 4.3 radiator have a oil cooler in it or is it outside of it ?how can you tell?


    Open the hood and look at both sides of the radiator on the engine side. Check the passenger's side for two aluminum lines going into it one near the top, and one near the bottom. Those should be for the transmission. Then look on the driver's side, same place, for the same type of lines going into it. The should be about as big around as an average pinkie or ring finger. If you have these types of lines going in on both sides (pass/Driver's) then yes the radiator has an oil cooler in it (Driver's side). If there are lines only on one side, then no, no cooler in the radiator.

    Hope that helps, Thanks for using FixYa.

    Mar 30, 2010 | 1997 Chevrolet Blazer

    1 Answer

    Radiator replace


    I Hope you Find this Helpfull And Please Remember to RATE ME

    1. Drain the coolant.
    2. Disable the SIR.
    3. Move the forwarding discriminating sensor out of the way.
    4. Remove the air cleaner assembly.
    5. Remove the cooling fans.
    6. Disconnect the radiator inlet hose from the radiator.
      1. Disconnect the radiator outlet hose from the radiator.
      2. Disconnect the engine oil cooler lines from the right radiator end tank.
      3. Disconnect the transmission oil cooler lines from the left radiator end tank.
      4. Remove the left and the right engine torque struts.
        1. Remove the upper radiator support screws.
        2. Remove the radiator from the vehicle. Lift the radiator up and out. INSTALLATION PROCEDURE
          1. Install the radiator to the vehicle.
          2. Install the upper radiator support screws. Tighten the bolts to 6 Nm (53 inch lbs.). NOTICE: Refer to Fastener Notice in Service Precautions.
          3. Install the transmission oil cooler lines to the radiator. Tighten the transmission oil cooler line fittings to 27 Nm (20 ft. lbs.).
          4. Connect the engine oil cooler lines to the radiator. Tighten the engine oil cooler lines to 18 Nm (13 ft. lbs.).
          5. Install the left and the right engine support torque struts.Connect the radiator outlet hose to the radiator.
            1. Connect the radiator inlet hose to the radiator.
            2. Install the cooling fans.
            3. Install the air cleaner assembly.
            4. Install the forward discriminating sensor.
            5. Enable the SIR.
            6. Refill the coolant.
          6. Hope this Helps and PLEASE RATE ME

    Jun 03, 2009 | 1998 Cadillac DeVille

    1 Answer

    I need 2 know how to remove the radiator


    THIS IS a 1995 LINCOLN CONTINENTAL W/4.6L ENGINE
    iIBELIEVE TOWN CAR IS DIFFERENT LET ME KNOW IF SO AND PLEASE DONT FORGET TO RATE ME


    REMOVAL
    1. Disconnect battery ground cable (14301).
    2. Drain engine coolant.
    3. Remove engine air cleaner (ACL) (9600).
    4. Remove upper radiator hose (8260) from water bypass tube.
    5. Remove radiator overflow hose (8075) from radiator (8005) and fan shroud (8146). NOTE: Loosen transmission oil cooler lines while securely holding radiator connector with a back-up wrench.
    6. Remove transmission oil cooler line from oil cooler inlet fitting.
    7. Remove nuts retaining A/C condenser core to the radiator.
    8. Disconnect engine control sensor wiring (12A581) from the auxiliary electric cooling fan motors and the CCRM.
    9. Raise vehicle on hoist.
    10. Remove splash shield from lower radiator support (16138) and front sub-frame (5C 145).
    11. Remove lower radiator hose (8286) from radiator. NOTE: Loosen transmission oil cooler lines while securely holding radiator connector with a back-up wrench.
    12. Remove oil transmission cooler line from oil cooler outlet fitting on radiator.
    13. Remove retaining screws for power steering/transaxle oil cooler and position cooler aside.
    14. Support fan shroud, radiator and A/C condenser core (19712) with a suitable jackstand. Remove lower radiator support. Position jackstand aside and carefully remove radiator and fan shroud.
    1. Remove two retaining bolts for fan shroud at top of radiator and remove fan shroud from radiator.
    2. Remove upper radiator hose from radiator.
    INSTALLATION
    1. Follow removal procedure in reverse order.
    2. Tighten fan shroud bolts and A/C condenser core nuts to radiator to 3-5 Nm (27-44 inch lbs.) .
    3. Tighten lower radiator support bolts to 8-11 Nm (71-97 inch lbs.) .
    4. Tighten transmission oil cooler lines to fittings to 25-28 Nm (18-21 inch lbs.) .
    5. Tighten power steering/transaxle oil cooler and splash shield retaining screws securely.
    6. Refill engine coolant.

    Feb 11, 2009 | 1995 Lincoln Continental

    Not finding what you are looking for?
    1995 Chevrolet S-10 CA Edition Logo

    208 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    60541 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21927 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6811 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...