Question about 2008 Pontiac G5

1 Answer

Changing the gear shift knob on the G5?

I was just wondering if anyone knew how to change the gear shift knob on the G5 i can get the little top part that says the gears on it but after that i dont know what to do can anyone help

Posted by on

  • 1 more comment 
  • g5man Aug 27, 2008

    I have the same problem, but my shift knob that says the gears actually broke off. I need to fix it fast.

  • RJULES1982 Dec 27, 2008

    DID YOU EVER FIGURE OUT HOW TO DO CHANGE IT?

  • RJULES1982 Dec 27, 2008

    RJULES1982@AOL.COM

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had this problem for months i wanted a new one that looked better. Here is what i did to remove it. First i went by where the boot ends on the shifter. If you notice it looks like a separate part than the shifter shaft. Take the bottom part that looks different and squeeze then turn counter-clockwise. After just a small turn, not even 45 degrees, pull down and it should reveal the metal and four plastic clips that are holding down the shaft. I then tried to remove this but could not so i did as the original post and removed the top with the gears on it and as i was pulling up on this, the whole thing came off revealing just the metal shaft. The plastic clips at the bottom were just there to help hold the knob from coming off. I hope this is helped some

Posted on Nov 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my ford freestyle gear indicator light how change it


Remove the PRNDL trim ring.
Remove the upper console panel.
Slide the lower shift knob bezel downward.
  1. Remove the bolt and lift up on the shift knob to remove.
Remove the lower shift knob bezel.
Disconnect the light bulb from the PRNDL bezel. an replace .

26002487-w0jffanovav232xjqcbliw5g-1-0.gif Don't think you need take shifter knob off . Just PRNDL trim plate an upper console plate . They should just pull up , use plastic trim tool to get it so you can get your fingers under an pull up carefully .

26002487-w0jffanovav232xjqcbliw5g-1-2.gif PRNDL trim plate

26002487-w0jffanovav232xjqcbliw5g-1-5.gif Light blub connector !

26002487-w0jffanovav232xjqcbliw5g-1-9.gif

Dec 11, 2015 | 2006 Ford Freestyle

1 Answer

Change gear knob


This is an "it depends" answer. It depends on the type of gearshift knob and its installation. If your vehicle is equipped with a manual shift and the shift lever is little more than a steel rod sticking up from the console, then it is easy to replace.

To replace it, simply do this:

1. Set the parking brake
2. Take the car out of gear
3. Center the gearshift
4. Place a piece of cloth around the gearshift knob to prevent damage
5. Place a ViceGrip (R) or pair of pliers around the cloth on the gearshift knob and gently begin turning the knob to the left
6. Spin the knob off the shaft

Remember, though, this works only if the gearshift knob does not have another function combined. For example, you might find a reverse gear actuator on the top of the gearshift knob or you might find a reverse actuator button on the front face of the gearshift knob. This type of combined function gearshift knob is usually found on automatic transmissions.

If you want to remove the gearshift knob from this type of shift, see the service manual and obtain the tools you will need as this type of gearshift knob is much more complex to remove and involves many different systems that have to be addressed before the knob will come off.

It is better to leave this type of fix to trained technicians.

If you need further information or if you would like to see information on automotive safety please visit this site: Safecar infoCar safety Insurance Magazine

Nov 12, 2014 | Cars & Trucks

1 Answer

I took my 2003 pontiac grand am to get a paint job. They broke my gear shift knob. In order for me to go into gear I had to put the broken gear shift knob in. Then I took it to wal-mart for an oil...


Contact an automotive recycler (junkyard) to see if they will sell you one. Often you can buy one that fits (but looks different) from an auto parts store like AutoZone or Checker.

Aug 29, 2010 | 2004 Pontiac Grand Am

1 Answer

I change my transmission range sensor 2006 suzuki forenza.. before it was not shifting or had a slow start and bad gas miles.. now i change it and it start great but my shift is off by a little.. (R) i...


The transmission range sensor mounting bolts are slotted so you can adjust it on the transmission. or even better there is an adjusting nut located under the circle cutaway on the driver side of the center console.

Aug 11, 2010 | Suzuki Forenza Cars & Trucks

1 Answer

4X4 gear shifter pulled off


It is held on underneath with 2 small 8mm head bolts. They probably rotted and broke off.. You will have to remove the 2 bolts and the big bolt on the side of the transfer case and remove the whole bracket if they are broke off. Only 1 might be broke because I believe the bottom hole on the shifter is slotted and the top one has the hole. Either way you will have to look at it from underneath. Hope this helps. Cobra..

Jun 04, 2010 | 1992 Ford F150 SuperCab

1 Answer

I'm having a problem with the gear shift button sticking on my 95 olds aurora. Any ideas of what is causing this and how to fix it?


The shift selector linkage can get sticky once in a while. Put your parking brake on and with the car off put it into 1st or 2nd gear then pull the handle off of the shifter. Remove anything in your cup holder and then you can snap off the shift console cover and get to the shift linkage beneath it. Spray lithium or silicone grease into all of the adjoining linkage rods and work it in and out. Then do the same at the top of the shift selector lever that you pulled the handle off of and push down on the top of the little plastic knob protruding from the top of it...that is how you change gears. It may just be sticky only in THAT spot but it doesn't hurt to get everything while you have it apart. Good luck let me know!

Mar 21, 2010 | 1995 Oldsmobile Aurora

1 Answer

Gear shift knob


Usually there is a small metal clip at the bottom front of the shift knob (looks like a staple.) Just pull it out and pull the knob straight up.

Apr 09, 2009 | 2004 Pontiac Grand Am

1 Answer

Removing Factory Gear Shift Knob for 2001 Jetta


On my 2000 jetta glx, I had to replace both the shift knob and boot as one. It is built as one unit. You have to pull the boot up over the shift knob, break/bend a clip to "unlock" the shift knob then pull up. I hope the new knob you got has the boot built in and comes with a new clip.

Jan 08, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

2002 VOLVO S60 automatic


I want to change the boot on my 2003 Pasatt..It seems to be connected to the gear shift knob...How do I get the knob off ??

Jun 29, 2008 | 2002 Volvo S60

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...