Step by step instructions on how to change a head gasket on a 1993 toyota camry le 4 cyl please help. Also if you may know why my car does a shudder when idling the rpms kinda go up down up down its miniscule but dont know what it is. I flushed tranny fluid and cleaned the gas system

Video Description
The video above shows how to change the fog light bulb in your 2004 Toyota Camry. Not all models have fog lights - for many Toyotas, it depends on your trim level (XLE) or whether the fog light option was ordered when your Camry was manufactured. Fog lights are typically in the front bumper, below the headlight cluster and are helpful in poor visibility. If one fog light is burnt out on your Camry, we recommend changing both bulbs because the working bulb will be dimmer than the one you replaced and will likely burn out soon anyway.

When you change the foglight on your Camry, be careful not touch the glass part of the bulb with your fingers which causes the bulb to burn out earlier.

Other videos you might find helpful

• 
  Replace reverse light White light when you back up - yup, they burn out and you can replace them with bright LEDs
  2003 Toyota Camry XLE 3.0L V6
  
• How to add transmission fluid If your transmission is running low on fluid, be sure to add some - find out how to do this here!
  2006 Toyota Camry LE 2.4L 4 Cyl.
  
• Complete oil & filter change Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?
  2006 Toyota Camry LE 2.4L 4 Cyl.
  
• Fix leaky hoses The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you
  2006 Toyota Camry LE 2.4L 4 Cyl.
  
• Set the clock to the correct time Is the clock in your car ahead or behind? Learn how to set it here!
  2003 Toyota Camry XLE 3.0L V6
  
• Oil level check Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary
  2006 Toyota Camry LE 2.4L 4 Cyl.
  
• See all videos for the 2003 Toyota Camry

Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...

P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota

31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html

toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair

Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

General Toyota Camry workshop manual here

http://www.turboninjas.com/camry/

eg1.pdf is the file for your engine

the best solution would be to buy the haynes manual from a local auto parts store. it provides step by step instructions.

INSTALL CYLINDER HEAD if any bolts broken or deformed , replace it.

7------2-----4--------6
5------3-----1--------8
FRONT sequence head bolts
8-------1-----3-------5
6-------4-----2-------7

CYLINDER HEAD bolts are tightened in three progressive steps
1. 34 Nm ( 25 ft.lb)
2. 90 degree
3. another 90 degree.

double check everythings before install the head,
be sure to install the GASKET correctly.

Hope this can help.

LE, is that the f or 6 cyl?'
I just changed my starter (cyl) with a socket set. Only two nuts to remove if I remember... a very easy job.
The 4 cyl is even easier. Installation instructions come with the replacement starter.

About $100.

Make sure you keep your antifreeze level at 20° below zero. It is anti boil too.

I'd remove the thermostat and run it. If the problem continues, it could be head gaskets, but, v6 head gaskets rarely fail. Also make sure that teh rad cap is good; have it pressure tested.

go to the library and borrow a manual its not a very hard job but you will need a manual.

should be a 14mm drain plug on the oil pan. you remove that until no more oil comes out. then put drain plug back in. it should be the only 14mm bolt on the bottom of the pan. then you will have a oil filter below the exhaust manifolds than needs to unscrew. replace with a new one. then fill your engine with 1 gallon or 4 quarts of oil.(same thing) thats all you should need.

i dont know but if you learngin how to work on cars thats a nice car to learn on. it pays off to repair your own car in the long run. you save so much money. :) GOOD LUCK!

good luck,
Michael