Question about 2000 Oldsmobile Bravada
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Look in the Engine bay fuse box at Fuse #12 this should be for the power windows. If this checks out OK, it could be a fault with a bad ground wire in driver's side door harness. You should be able to pry the runbber boot from the drivers door, and check the larger Black wire that goes through it. These have been known to break after a few years use. If it is the cable, cut neatly, strip the ends anu use a crimp splice. Hope this is a quick and easy fix for you. If it helps you solve the problem, Please take a moment to rate as Fixya! Thanks.
Posted on Jun 17, 2008
Not a solution for the problem exactly but to the person who pulled his fuse for the dome lamps, all you need to do is turn the interior lights off at the turn signal switch next time. I'm going to have my wiring repaired tomorrow. Thanks for the info.
Posted on Sep 08, 2008
i had same problem on my jeep i disconnected the battery then reconnected everything worked fine after that
Posted on Nov 25, 2008
SOURCE: 04 Jeep Power Windows
you can pop up the panel that holds the buttons check the underside that everything is hooked up then check fuses and if you need the buttons you can install them pretty easily
Posted on Jan 25, 2009
Tips for a great answer:
Jul 14, 2018 | Oldsmobile Cars & Trucks
Jan 04, 2015 | 2000 Oldsmobile Bravada
Apr 29, 2011 | 1998 Oldsmobile Bravada
Feb 18, 2011 | 2000 Oldsmobile Bravada
Dec 18, 2008 | 2000 Oldsmobile Bravada
Nov 27, 2008 | 2003 Oldsmobile Bravada
Aug 23, 2008 | 1997 Oldsmobile Bravada
100 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: