Question about 1999 Chevrolet K1500
My power lock on drivers side door wont unlock the key wont unlock it either how can i get the door unlocked
Is the lock mechanism siezed,or is the linkage disconected?
Posted on Jun 15, 2008
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
probably gonna have to take the door panel off. You say it wont unlock or lock with the key? if thats the case its probably broke inside the door.
Posted on Aug 23, 2009
You likely have a "link rod" that has either broken it's clip, or come unclipped from the lock and handle assembly. It could also be a broken door handle itself. It's very difficult to tell untill you have the door panel off to inspect. First, pull the door panel. Should be one screw in the inside door handle (#2 phillips), and 1 or 2 (can't remember) in the inside of the hand grab (also #2 phillips). To get the door latch and lock assembly off the door panel, after removing the screw push the assembly forward (towards the front of the car) and pull outward lightly on the back of the latch assembly. Once off, you will see two metal link rods with plastic clips on them, one for the door release and one for the lock. To remove the rods from the clips, look for the "open end" of the clip and push it. This will swivel the clip out of the way and the rod will lift out of the hole. About 90 degrees of rotatiojn should be enough, and from what I remember, they will rotate (looking down) counter-clockwide to release the clips After that, it's just door panel trees. If I remember correctly, there are between 8 and 10 of them. Start at the door catch/latch and work your way around. If you have a door panel removal tool, use it. If not, a single, or even better a pair of thin (1 inch wide) putty knives can be used. Flat blade screwdriver is the last resort. Once the door panel is off, check the other ends oif the link rods you just took off. If one isn't connected, bingo. If it is, then remove the door latch from the door frame using a 10mm socket and an extention. I believe there are 3 bolts holding the latch to the door. Check the opperation of the latch off the car using a screwdriver to act as the door striker, and opperate the levers the link rods move by hand. If the latch is bad, replace! the Stick
Posted on Dec 10, 2009
Tips for a great answer:
Apr 02, 2014 | 2008 BMW 320i Automatic
May 11, 2013 | Buick Regal Cars & Trucks
Mar 02, 2013 | 2001 Chevrolet Venture
Sep 01, 2012 | 2003 Mitsubishi Galant
Oct 24, 2017 | 2006 GMC Envoy Xl
Oct 07, 2009 | 1999 Ford Ranger SuperCab
Aug 20, 2009 | 2000 Toyota 4Runner
Aug 16, 2009 | 2004 Toyota Solara
May 01, 2009 | Honda Accord Cars & Trucks
1,403 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: