Question about 2007 Chevrolet Impala LS Sedan New Cars
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Door Panel removal
remove all visable screws from panel and arm rest. Arm rest should come off. Use a flat thin tool or piece of metal and slip it between the panel and the metal door frame. Slip it in about 2 inches,. Slide it back or forth til you hit a stop. That should be a plastic pop in.twist metal tool to pull panel away from the door. It should pop away from door frame. Don't overdo it if it doesn't come out. try another spot. once you get one loose, you can tell how to get the others out. Once panel is loose push it upwards to get top lip out of window bottom. If it has power windows,disconnect plug. If it has manual windows, you will have to remove the window crank There is a snap ring behind window crank that has to be removed.push in on panel by window crank and you can see the ring.
Posted on Dec 06, 2008
Look on the door panel for small plastic covers. There should be one or two at the door handle and maybe another closer toward the door hinge. Also, around the perimeter of the door panel, there are some plastic inserts. They are ribbed and are just pressed into holes on the metal door frame. You just pull on the door panel in these areas to get the plastic inserts out. There might be as many as 3-4 at the bottom and a couple on the sides. Where the panel contacts the window, it just slips up. None of this should take too much force, so if you are having to pull really hard and the panel is moving, there must be another screw or something is stuck. Careful not to break your panel. Once inside, see if there is a linkage disconnected. From what you have described, it does sound like something mechanically wrong.
Posted on May 01, 2009
SOURCE: driver side window off track
2 sets (total 4) T30 Torx screws need to be removed.
The 2 holding the interior door handle grip / cup.
And then behind where the cup is, there are 2 more, that secure the door panel to the door.
FWIW, there are also 2 philips screws. One at the top, near the mirror. The second at the moveable door handle latch.
Lastly, of course, the standard "pop" sort of fasteners, around the perimeter on the 2 sides and bottom of the door panel. Also, there are 2 light blue plastic alignment posts (that do *not* fasten).
When re-assembling, make *sure* to properly catch / engage the door panel's top black plastic lip into the 3 hidden metal "U" holders, at the very top of the door panel.
Posted on Jul 26, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Oct 06, 2018 | Cars & Trucks
Oct 12, 2016 | 2005 Chevrolet Impala
May 26, 2014 | 2008 Chevrolet Impala
Jun 16, 2012 | Cars & Trucks
Aug 10, 2011 | 2007 Chevrolet Aveo Sedan
Jul 28, 2011 | Chevrolet Impala Cars & Trucks
Jul 07, 2011 | 2006 Chevrolet Impala
May 03, 2011 | 2006 Chevrolet Impala
Jun 18, 2010 | 2007 Chevrolet Silverado Classic SS New...
Mar 13, 2010 | Chevrolet Tahoe Cars & Trucks
1,034 people viewed this question
Usually answered in minutes!