Question about 1991 Ford Mustang

1 Answer

A/c not working

Hey , i've got a 91 mustang 2.3 liter. the a/c stopped working, looked under the hood and the clutch wasnt turning. i know it still has the froen in it cuz i pressed the valve where it goes....do you think it sounds like the clutch?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 63 Answers

Because it isn't frozen and the complete pulley hasn't stopped moving this leads me to believe that one of two things are wrong here.

1)the clutch may be done and need replacing
2)there may be a wiring issue or a bad switch

Posted on Sep 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual transmission 91 honda crx will not go into gear shortly after start up or when vehicle is off.


Brian
I see this is an older post. I have a 90 Crx and was wondering if you still have the car and how you solved the problem?

Apr 01, 2013 | 1991 Honda CRX

1 Answer

I have a 2002 Dodge Caravan and when I start the van and turn on the AC a belt starts squeaking and the van runs rough with a rattling noise under passanger side of the hood. Sometimes this causes the van...


did this occour suddenly? if you can get someone to turn the A/C on briefly while your looking under the bonnet and look at the A/C pump. if you dont know what one it is wait untill they turn it on and find which pulley stops turning. because it sounds to me like your A/C pump has seized and if it engages and the pulley stops turning that would confirm it. once you know you can still drive it just dont turn the A/C on untill you get the compresser replaced

Sep 20, 2012 | 2002 Dodge Grand Caravan

1 Answer

How adjust the clutch on 2001 ford mustang 3.8


Per the Ford owners manual:

The clutch on your

vehicle is operated by

a cable. As necessary, adjust the clutch as described

below.

1. Turn the engine off and shift into 1 (First).

2. Put your foot under the clutch pedal and gently

pull it up until the pedal stops.

3. Push the clutch pedal down slowly. You will hear a
click as the clutch adjusts itself.

Mar 31, 2012 | 2001 Ford Mustang

1 Answer

My signal lights and brake lights on my 91' Ford mustang stopped working. Does anyone have a owners manual?


Try checking http://www.ffcars.com/forums/108-electrical/211187-helpful-electrical-drawings-schematics.html. You've checked your fuses already, correct? You can also pick up the correct Haynes or Chiltons manuals not only from your local Autozone or Pep Boys, but also many libraries carry these manuals as well.

Sep 13, 2011 | 1991 Ford Mustang

1 Answer

Need to know if a 91 ford mustang with a 2.3 liter engine uses 2or 3 digit codes when using a code scanner to diagnosis engine problems


3 digits. follow this link for more info. Good Luck.
http://autorepair.about.com/library/ts/obd-i/bl-dtcs-98.htm

Sep 19, 2010 | 1991 Ford Mustang

2 Answers

WILL A SPEEDOMETER OUT OF 89 MUSTANG WORK IN A 91 CLUSTER PANEL BECAUSE THE 91 SPEEDO SPURATICALLY GOES UP AND DOWN


i do not know but give these websites a try www.alldatadiy.com and www.autozone.com you can also stop by your local Ford dealership in the parts department and they be able to tell you if it does not work and you are looking for one try a good salvage yard near you give this website a try www.junkyarddog.com wish you the best of luck Michigan Man.

Feb 08, 2010 | 1993 Ford Mustang

1 Answer

THE LATCH ON MY 1996 MUSTANG IS BROKEN. HOW CAN I


hey under the hood in the front there's a latch on the left side.
you either wana push it down and use other hand to pull up the hood or it might be the other way; push it up then lift up the hood.

my latch is broken also and i opened it like that. i hope you find the latch =)

Sep 23, 2009 | 1996 Ford Mustang

1 Answer

2006 Mustang not holding any water...


maybe a cracked block have you checked the radiator

Jun 18, 2009 | 2006 Ford Mustang

1 Answer

Window stop working


the clicking u can hear is the relay for the window clicking, so i would say thats working, but u can also check with a multi meter, could also be the motor for the window, check all your fuses as it could be that also if its blown a fuse there is ur answer. and clean the window switch.

Jun 01, 2009 | 2003 Ford Mustang

Not finding what you are looking for?
1991 Ford Mustang Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...