Question about 1987 Peugeot Liberte

2 Answers

Gearbox from clutch

I hve started taking gearbox out off a Peugeot 306 TD but i cant separate it from the clutch can you tell me how to do it ?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There are 2 pins behind the clutch. u need 2 turn the arm that engags the clutch wen u take it of and revers wen putting it bk. make sure everything behind the clutch is lined up. dont hit or wrench it of. you will just damage it.

Posted on Mar 21, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

Have you checked the clutch mechanism? for me sounds like the clutch doesn't engage properly or fully rather. Ask your mechanic to check the clutch system fully and check whether it fully engages, or do this check for yourself. Bring car onto a flat surface and shift to 1st while engine being switched off, start it while pressing the clutch (fully down to the floor board) and then release parking break and check for following
whether vehicle is moving
RPM decreases a bit
does engine get loaded and start vibrate or rattle a bit

Posted on Jun 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i no if my clutch needs replacing in my 1997 peugeot 306 convertable


Certainly, that's one way! If the clutch is worn out, it will "slip". A way to tell is to put the car in 3rd gear and rfev the engine just alittle and then let ehte cutch "out." If the engine continues running, the clutch is slipping. You may be able to smell "something" buring as well. That would be the clutch disintegrating.

Be sure to have the flywheel inspected for damage when the clutch is replaced. It may only require resurfacing but it may need ot be replaced.

Feb 11, 2015 | 1997 Peugeot 306

1 Answer

Peugeot 306 gearbox


look ur cars had already done 13 years i think the drive shaft tooths may be worn out or chk out the fitting of drive shaft positioned properly or not

Sep 13, 2013 | Cars & Trucks

3 Answers

Where is gearbox oil refill plug on peugeot 306 hdi 51 plate


it is a 19mm bolt on the side of the gearbox it takes ep 75 90 gear oil if it helps

May 02, 2010 | Peugeot Liberte Cars & Trucks

1 Answer

HOW TO TAKE ENGINE out OF PEUGEOT 306 GTI UP OR DOWN ON TO FLOOR


do you take out sub frame with engine and gearbox attached on a peugeot 306 diesel to change engine

Feb 20, 2010 | Peugeot Liberte Cars & Trucks

2 Answers

Its a bit stiff going into first and grinds going into reverse, and judders in first with clutch fully depressed? feels like the clutch isnt fully disengaged??


it sounds like an oily or distorted clutch plate, have you had any work done lately? I have seen loose engine to gearbox bolts cause this.

Oct 22, 2009 | 2005 Peugeot 405

1 Answer

Timing belt 1997 306 1.9 td


hallo
hope it helps
marko
94b52e0.jpg

Oct 08, 2009 | 1991 Peugeot 405

1 Answer

What is the frequency that a cambelt should be changed 306


useualy at 100000 klms there will be a light that comes on at that distance to tell you ,if you are sure that the odmeter reading is correct then dont worry .if not you can change it tobe sure

Sep 06, 2009 | 1991 Peugeot 405

1 Answer

S reg peugeot 306 1.9 gearbox??


It may be the clutch thrust bearing drying up.
Causing it to start seizeing.
The easiest solution is to change the whole clutch, or get it changed in a garage as you do need some specialist tools and knowledge.
Check the fan belt as the can make the same screech when worn or loose.

Aug 26, 2009 | 2006 Peugeot 604

1 Answer

Gearbox replacement


Yes you can no problems as such ,just make sure you have the same size spigot shaft ,if not then use the clutch from the donor vehicle

May 20, 2009 | 2005 Peugeot 405

3 Answers

Speedo, rev counter and fuel gauge not working on peugeot 306


hi i have a garage this problem i encountered myself the other week disconnect the battery for about five minits and then reconnect this solved the problem on this P reg 306 good look if you have not sorted your problem.

Mar 23, 2009 | Peugeot 405 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...