Question about Oldsmobile Cutlass Ciera

1 Answer

How do I replace the drivers side door latch on a 1995 Oldsmobile Ciera? Is there a diagram available? The sliding door lock seems to be a problem removing the facing.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 347 Answers

If you slide the door lock slider to the unlock position you can grab a hold of the end of it and pull towards you it's only held on by a clip embedded in the plastic. Once that's removed remove the trim panel behind it to gain access to the door handle assy.. The handle is riveted on to the door skin so you will have to drill out the rivet after that the handle will slide towards the front of the car about 1/2 inch and its free just disconnect the lock rod and install your new handle it sounds like a lot but is actually very easy

Posted on Oct 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the relay switch for the fuel pump in a 1995 Oldsmobile cutlass ciera?


The fuel pump relay is located under hood, passenger side, front side of wheelwell, mounted in relay panel. Here is wiring diagram of fuel pump circuit:


c1ae0e09-74db-430e-8caf-74e200175073.gif

Aug 24, 2014 | 1995 Oldsmobile Cutlass Ciera

1 Answer

Driver side door rod to handle has come loose from the locking mechanism


There is a replacement clip available in most auto repair stores. HELP brand. Must remove the door panel (inside) and re-attach.

Feb 16, 2014 | 1995 Mercury Villager

2 Answers

Need help in replacing spark plugs on a 1995 olds cutless ciera the wiring order with diagram


1995 Oldsmobile Cutlass Ciera 3.1 liter V-6 VIN "M"

zjlimited_352.gif


1995 Oldsmobile Cutlass Ciera 2.2 liter L4 VIN "4"

zjlimited_353.gif


Hope this helps (remember to rate and comment this answer).

May 09, 2011 | Oldsmobile Cutlass Ciera Cars & Trucks

2 Answers

Where is the relay switch for the power door locks on a 93 Olds Cierra?


Hi Friend: Your Circuit Breaker for your power door locks are located in your fuse box, its Located Left Side of the drivers side instrament Panel, Which it pulls Down for easy Access. Just lock at the Diagram or labels right where your fuses go in. . I hope this has helped you. Please let me Know if this has Solved your Problem. Thanks From d_hubbs

Jun 09, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

2001 Toyota Sienna r.h. sliding door ''rear latch switch'' location


To start, the noun "''rear latch switch'' is incorrect. It's actually called "Slide Door Lock". It's located on page BO-20 of the Toyota Repair Manual for the 2001 Sienna. There are two door locks on one sliding door. One in the front and one in the rear. Obviously, you want the one in the rear. The location for the "Slide Door Lock" (which also contains an electric switch) is in the rear of the sliding door located mid way up door. You can see (sliding door opened from the back) it without dissembling the door. And, the lock is made up of plastic (dirty white in color).

Mar 06, 2010 | 2001 Toyota Sienna

2 Answers

The drivers front door will not open from the inside. The interior door handle won't activate the mechanism to open the door. Yet, the exterior door handle will open the door. Please advise! Thank you!


It could be the latch, but look to see if the interior door handle rod is still connected to the latch assembly. You will need to remove the interior door panel.

Jan 27, 2010 | 1995 Oldsmobile Cutlass Ciera

1 Answer

Transmission


its the lock-up solenoid that cause the problem driver side trany cover on top cant mist it . good luck pierre

Jun 24, 2008 | 1995 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Jonah Oneal

Level 3 Expert

14092 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...