Question about 1999 Chevrolet Blazer

1 Answer

1999 Blazer check eng light is on. I have no power to the port to which the codes can be gotten. The lighter also has no power. When changing the fues it blows new one as soon as it touches the post in fuse box

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 749 Answers

Try unplugging the power socket for the lighter and see if you can replace the fuse for it without blowing again. Many times the lighter sockets will go bad or have something stuck in them such as change or other debris. Let me know what happens so I can get a wiring diagram if needed.

Posted on Oct 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cigarette lighter not working,already change fuze for 2002 4door explore, what to check now?


use a test light on cigar lighter, put probe in center of socket and the ground on outside of cigar socket or any other good ground. if power to socket, this will tell you if the cigar socket is bad and needs replaced. if it has power and lighter does not work, then its the heating element itself thats bad, the part that heats up! good-day !

May 27, 2012 | 2002 Ford Explorer

1 Answer

Blazer 1999 won't start got spark new fuel pump


Pull off one injector connector and use a test light or voltmeter to see if one wire has power with key on.
Power to the injectors is fed through the ignition switch, so with key on, you should have power there. The injector ground is inside the ECM. If you have power, you'll have to diagnose the circuit for why computer doesn't ground the circuit when it should.

Nov 06, 2011 | 1999 Chevrolet Blazer

1 Answer

Lack of power at acceleration. Changes gears fine just cleaned out the intake egr valve and hoses. The Check eng light is on but obd 2 reader is not reading anything? Could it be a fuse related problem or...


Does it have 16 pin DLC , the place where you plug in the code reader ? What kind of code reader are you using ? Most of these the fuse for the Cig. lighter powers pin 16 ,check for B+ voltage with a volt meter , test light etc....

Aug 20, 2017 | 1996 Buick Century

1 Answer

Check engine light and no power to DLC


Check the fuse that powers the DLC. It might be shared with the cig lighter or aux power sockets adn may have been blown.

Nov 20, 2009 | 2001 Chevrolet Blazer

1 Answer

Check engine light on and cannot read w/ odbII scan tool. blazer will not power up obdII


fuse for cig lighter is blown and needs changing this is what powers up obd II circuit..

Oct 29, 2009 | 2000 Chevrolet Blazer

1 Answer

Blower fan has no output. Temp guage not working


for blower motor check fuse hvac 20a int.panel and hvac 30a fuse in elect.center eng.compartment,if ok,check for 12v at blower connector if power is there fan is defect..temp.gauge check connection at unit if ok check resitance if it varies when engine warms up,if it doesnt vary replace unit,if it varies check wiring circuit,unit is place at drivers side of eng.block near sprk plugs.for hard to start;if check eng.light is not on could be in need of a tune-up depending on how long ago it was done,if check eng light is on or was on scan ecm for trouble code.

Oct 03, 2009 | 1999 Chevrolet Blazer

2 Answers

1999 VW Bug Service engine Light


When you say water light comes on, do you mean coolant level, or coolant temp or ? Check coolant level and top off if needed. Bring the Beetle to a parts store, most offer free check of check eng. light. They will plug a hand held scan tool into the cars diagnostic port (usually located under the dash) and 'read' stored engine codes in the cars computer. They can tell you what the codes mean, and suggest what to do. If you have further questions, post them here along with the code numbers.

Apr 17, 2009 | 1999 Volkswagen Beetle

1 Answer

Check engine light + TCS = braking vibrations


You need to get to a repair shop and have them read the diagnostic codes (the computer port is in the center console under the change holder/lighter). With that amount of mileage, it is very likely the code will show that the oxygen sensors and/or catalytic converters need replacement. If that is the case you will also need a tuneup (plug, wires, etc). I had this done a year ago at 160,000 miles. It is a pricey repair but I get 29mpg at highway speeds and it runs nicely on regular (less power but no pinging).

Oct 26, 2008 | 1999 Acura TL

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...