Question about 1997 Chevrolet Blazer

1 Answer

Starts with remote but when put in ignition position it stops

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 279 Answers

If this is one of those after market remote starters your problem could be a conflict between the ignition system on the car and the starter anti theft.In my oppinion you have two options,disable the remote and see if the car starts at the ignition,or have it trouble shooted by an installer if you are not that handy.Problem with these starters is once they start to act up they can let you down in the most inconvenient places.Good Luck

Posted on Oct 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Chevrolet Tahoe 1999 start then stops ! 2 my


A common issue with the later 90's chevy was an ignition tumbler going bad. So, where you put your key in to start the vehicle--this part needs replaced. One I seen actually stuck in the starting position and burned up the starter before power could be shut off to the vehicle. Lock/Unlock buttons on the door? Try disassembly of switch and cleaning the contacts with electronic parts cleaner, dry and re-assemble. Be sure to use cleaner that is safe for plastics.

Oct 01, 2013 | 1999 Chevrolet Tahoe

Tip

How to disable the alarm in the Hyundai 2003 Tiburon car without the remote?


The procedure is as follows:--
  1. Put the key in the ignition and turn to the "On" position.
  2. Leave it in that position until the alarm stops, between 30-120 seconds.
  3. Wait 30 seconds after that and start car.
This will help.thanks.

on Mar 16, 2010 | Hyundai Tiburon Cars & Trucks

1 Answer

How do you turn off maintenance overdue on 2008 v70 d5


Insert remote control in ignition slot. DO NOT depress any pedals. Press start/stop button once to switch ignition to position I. Press and hold button [A] 113463. Press and hold start/stop button for approximately 2 seconds to switch ignition ON. Wait 10 seconds. Release button [A] 113463 when information lamp [B] 113462 starts to flash. There will be an audible signal when reset is complete

BUTTON A IS TRIP BUTTON

Mar 17, 2010 | 2007 Volvo V70

1 Answer

I have a factory starter on my chevy malibu 2006. Only one remote would start the car starter. then both stopped unlocking and locking the car but they both open the truck. Now the remote started does not...


Usually with remotes you turn the key for the ignition to the off position,then turn the ignition key eight times without starting it, on the 8th time leave the key on the forward position then push any button on your remote that should fix the remote problem.

Sep 30, 2017 | 2006 Chevrolet Malibu

1 Answer

My 1994 pontiac grand prix was running fine , i stopped at home and when i went to leave the car started but the stalled out!! I then tried to start it again and it barely turns over but will not start!


Not an expert by any means, but I had a similar problem.
Everything was fine until one morning (it was a bit chilly out in my defense) I used my remote starter to warm up the car before leaving.
I forgot I had used the remote and hit the brake to shift into drive. Engine stopped (obviously with no keys in it!). I thought I could just put the keys in and go, but ignition would not catch.
I've actually made that mistake a few times before, but that day, for the first time ever, it prevented the engine from starting for a good 2 hrs.
Really was no solution. I just let it sit and kept trying every 30m or so with both the key and remote starter. The remote starter finally got it going again and this time I followed the instructions (put key in and turned to "On" position).
Since then, it has started up as usual.

Nov 07, 2009 | 1994 Pontiac Grand Prix

2 Answers

2000 hyundai elantra alarm goes off where is the


There is NO kill switch on the 2000 Elantra... HOWEVER, there is a thing called the Key Fob (keyless remote entry system). There is, however, a system in place called the 'starter kill' circuit and it is activated when the burglar alarm goes off.... it's called the burglar alarm relay and it is activated to prevent the engine starter system from being used. There are three ways to get the engine started in such a circumstance... 1. use the key fob to 'disarm' the system... 2. put the key in the ignition and turn it to the 'RUN" position and wait until the alarm stops (horn stops beeping and the parking lights stop flashing), then the engine will start.... 3. pull the starter relay from the UnderHood junction box and bypass the starter circuit (key in ignition and in the 'RUN' position), jumper the starter solenoid circuit to energize the solenoid to start cranking the engine -- it should start then.

Oct 03, 2009 | 2000 Hyundai Elantra

1 Answer

Remote not working after disconnecting battery


If car Convenience Control Module(module that control key remote) lose power- remote adaptation to the car will be lost. This apply to some Audi models.
What you can try to do is:
1. Disarm alarm manually by opening door lock with the key
2. Put key into ignition and turn to on position (don't start the car)
3. Press few times remote button (with the ignition in on position)
Depends on your year model it my work (works on the newer models), if not you have to go to the dealership to program your keys.
Good luck!
Grzesiek

May 11, 2009 | 2003 Audi A4 Cabriolet

1 Answer

Remote starter


Apparently the vehicle was in park enough to get the key out, but not enough to get it to turn to start or allow the remote starter to work. Once it had been jiggled around and put ALL the way into the PARK position, all works well again!

Apr 09, 2009 | 2005 Ford Expedition

1 Answer

Can not turn key in ignition to the start position.


sounds like the brake pedal lock out switch or the gear selector switch is out of adjustment.

Feb 22, 2009 | 2007 Chevrolet Equinox LS New Cars

3 Answers

Key Does Not Work


It could be that chip inside key just went bad. Do u have a 3rd key? That works? If so take the 2 good keys and turn the igntion to run postion for 3 secs each then do the same for the 3rd key and this will reprogram it if the chip is ok. If you do not have 2 good keys then u will have to have a scan tool that will link up with PATS system and perform security access to reprogram it.

Feb 12, 2009 | 2005 Ford Taurus

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...