Question about 1991 Buick Century

1 Answer

1991 Buick Century Drivers door Power Window switch.

Replaced switch, still doesn't control windows. Rear and passenger windows work individually. Drivers window does not work.

Posted by on

  • Anonymous Mar 18, 2014

    ive replaces the switch on the drivers side door and am gettind power to all my window switches but none of my window go up or down.

  • Anonymous Mar 22, 2014

    switch forunlocking windows and door on drivers side

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 142 Answers

Motor which runs when u press the switch has loosened connections or is not functioning
Get it checked

Posted on Jun 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the right front door panel on a 2004 buick le saber


Did you test it or are you guessing just because it won't open or close ? How To Install Remove Front Door Panel Buick Lesabre 00 05 1AAuto com both right an left are the same .
Power Windows System Components
The following components are used to control the power windows:
?€¢
Driver Door Module (DDM)


?€¢
Passenger Front Door Module (PDM)


?€¢
LH Rear Door Module (LRDM)


?€¢
RH Rear Door Module (RRDM)


?€¢
Driver Door Switch Assembly (DDSA)


?€¢
RH Front Power Window Switch


?€¢
LH Rear Power Window Switch


?€¢
RH Rear Power Window Switch


?€¢
LH Front Power Window Motor


?€¢
RH Front Power Window Motor


?€¢
LH Rear Power Window Motor


?€¢
RH Rear Power Window Motor


?€¢
Class 2 serial data circuit


?€¢
Power door serial data circuit


?€¢
PWR WDO 30 Amp Circuit Breaker


?€¢
DRVMDL Fuse (10 amp)


Driver Door Switch Assembly and Driver Door Module logic, Driver Door Module internal driver operation


?€¢
PASS MDL Fuse (10 amp)


Front Passenger Door Module logic and internal driver operation


?€¢
RRDR MDL Fuse (10 amp)


Left Rear Door Module and Right Rear Door Module logic and internal driver operation


Do you know about computer controlled power windows ?
Power Windows Operation
The vehicle is equipped with power windows controlled by the door modules. Each passenger door window can be operated, either from a switch built into the driver door switch assembly (DDSA), or from a switch mounted locally to its associated door. The driver door window can be operated only from the driver door window switch built into the DDSA.
When a window is operated from the DDSA, the DDSA interprets the window switch signal as a specific window switch request and sends the information to the driver door module (DDM) via the power door serial data circuit. The DDM examines the request and checks to see if it has received any class 2 serial data messages from any of the other vehicle modules (i.e. ignition switch position) prohibiting the movement of the window. If the window being operated is the driver door window, and if no prohibitive class 2 messages have been received, the DDM then applies voltage and ground to the driver door window motor to move the window glass as requested. If the window being operated is a passenger door window, and no prohibitive class 2 messages have been received, the DDM sends the request, via the power door serial data circuit, to the appropriate passenger door module. The passenger door module then applies voltage and ground to the passenger door window motor to move the window glass as requested.
When a passenger door window is operated from the power window switch mounted locally to its associated door, the passenger door module first checks to see if the DDM has received any prohibitive class 2 serial data messages. If there are no prohibitive messages, the passenger door module powers the associated passenger door window motor.
Both front door windows have the express down feature. This allows the front door windows to be fully opened by momentarily pulling the appropriate window switch lever to the second detente and then releasing.

Oct 30, 2016 | Buick Cars & Trucks

1 Answer

Where is power window relay located 2001 buick regal


There is no relay for power windows !
Power Window System Components
The power window system consists of the following components:
?€¢
Driver window switch


?€¢
Front Passenger window switch


?€¢
Left Rear window switch


?€¢
Right Rear window switch


?€¢
Window regulator motors in each of the doors


?€¢
PWR WINDOWS PWR SUNROOF Circuit Breaker 30A


When the ignition switch is in the RUN or ACCY position, or Retained Accessory Power (RAP) is enabled and the lockout switch is disengaged, battery positive voltage will be available at the passenger window switches. When an individual window switch is pressed in the down position, battery positive voltage is applied to the window regulator motor causing that window to open. When the individual window switch is pressed in the up position, voltage is applied to the window regulator motor in the opposite direction causing that window to close. The return path to ground is supplied through the inactive control circuit being normally grounded through the driver window switch.

Jul 28, 2015 | Buick Cars & Trucks

1 Answer

Anyone have the wiring diagram for a 1988 buick century window switch, drivers door ?


Enter this string in your web browser under the images search bar"wiring diagram for a 1988 buick century window switch"
and you also look at this web page:
http://ricksfreeautorepairadvice.com/window-goes-up-but-not-down-window-goes-down-but-not-up/

Feb 05, 2015 | 1988 Buick Century

1 Answer

Buick century power window


i have fixed this problem on mine remove front drivers door panel trace your ground wire from window switch and make sure you have a good ground once you fix your ground you will fix your windows

Sep 24, 2013 | 1994 Buick Century

1 Answer

Power windows


see the diagram and troubleshooting. and fix it. God bless you
test wires, connector, fuse, loose , dirty, bad contact, corrosion, faulty motor, switchs open or dirty or faulty

10_18_2012_4_26_45_am.gif

Oct 18, 2012 | 2000 Buick Century

1 Answer

Buick century 1998 power window passenger side will not work , nothing work mechinal , all other windows work


You most likely have a bad window lift motor or MORE LIKELY a broken window regulator. The door must be disassembled to replace either or both of these.
It could also be a bad window control switch or a broken wire in the door-jamb area. Please note that EITHER of the switches for the passenger window (the driver's control switch or the one on the passenger door) can cause BOTH of the switches to not work to move the passenger window. In this case, electrical diagnosis must be performed to locate the cause of the problem.

Oct 10, 2011 | 1998 Buick Century

1 Answer

Passenger and rear windows only work with the drivers door switch but not each individual switch.


check to see if the child lock is on.there is a master switch on the door panel

Oct 24, 2010 | 1999 Buick Century

1 Answer

I have and 91 buick century and the two back windows won't come down could it be fuses that I need to replace


If the master switch that controls these windows you are talking about try the switches on the rear doors first. If they work the windows the drivers master switch needs to be replaced only

Jun 14, 2010 | 1991 Buick Century

1 Answer

1999 Buick Century - passenger side power window does not work


Replace the Driver side window switch. These have a corrosion issue.

Mar 27, 2009 | 1999 Buick Century

Not finding what you are looking for?
1991 Buick Century Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...