Question about 1996 Cadillac Eldorado

1 Answer

Bank 1 Sensor 1 Location

After runnig my car through an emissions check for the state it threw a code complaining about bank 1 sensor 1. What could this be and where is sensor 1 located if yu are standing in front of the car?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tightened the gas cap. Emisions testing left it slightly loose setting off the sensor warnings. Even if it doesn't "look" like it is ose take it off and put it back on tight. If the warnings are still flashing then it prob is the sensor. Caddy's are very touchy about their gas caps!

Posted on Jun 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006. hard shifting, bogging on accelaration. Where should I start on troubleshooting these codes?


http://www.obd-codes.com/p0141 P0443 Evaporative Emission Control System Purge Control Valve Circuit P0036 HO2S Heater Control Circuit Bank 1 Sensor 2 P0030 HO2S Heater Control Circuit Bank 1 Sensor 1 http://www.obd-codes.com/p0135 http://www.obd-codes.com/p0102
It looks like you have two bad O2 sensors an a bad mass air flow sensor . Is your vehicle a 4 cylinder or 6 0r 8 cylinder ? Bank 1 sensor 1 an bank 1 sensor 2 heater circuits . plus you have a EVAP. emission purge control circuit problem ! I would go on you tube an enter your trouble codes to see videos on testing

Feb 09, 2016 | Chevrolet Cars & Trucks

2 Answers

I need the location of oxygen 2 sensor on 96 Maxima


bank 1 refers to the side of the engine. on a four cylinder there will onlyu be a bank one. a v-6 will have a bank 1 and a bank 2. Bank 1 will be on the same side of the engine as cylinder number one. Bank 2 will be the opposite side. Sensor 1 is always before the catalytic converter. Sensor 2 is always after the catalytic converter.

So , for example, if your looking for Bank1 Sensor2 it will be in the exhaust pipe after the cat on the same side as the number one cylinder.

Aug 16, 2015 | Cars & Trucks

1 Answer

What does obd 1 code 25 and 26 mean?


EOBD II Error Code: 25
Description:
System too Lean, Bank 1
Possible Causes:
- Intake/exhaust leak.
- Secondary air injection (AIR) system.
- Manifold absolute pressure (MAP) sensor.
- Mass air flow (MAF) sensor.
- Fuel pressure/pump.
- Injector(s).
- Evaporation emission (EVAP) canister purge valve.
- Heated oxygen sensor (HO2S).
- Contaminated fuel.

EOBD II Error Code: 26
Fault Location:
System too Rich, Bank 1
Description:
- Evaporation emission (EVAP) canister purge valve .
- Fuel pressure.
- Injector(s).
- Heated oxygen sensor (HO2S).
- Contaminated fuel.
Hope that works.

May 24, 2014 | 1995 Toyota 4Runner

2 Answers

What does the codes p0442,p0136 &p0141 mean on my 2001 ford taurus it failed inspection for these codes


P0442 FORD - Evaporative Emission System Leak Detected Small Leak

Possible causes- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
P0136 - O2 Sensor Circuit Malfunction Bank 1 Sensor 2
Possible causes- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

P0141 FORD - O2 Heater Circuit Bank 1 Sensor 2

Possible causes- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)

Sep 27, 2012 | 2001 Ford Taurus

1 Answer

WATER IN OXYGEN SENSOR 04 INTREPID


you need to do a compression test and a cooling system pressure test to make sure there is no leakage.
If this is ok then there is a possibility that it is not burning the fuel properly and that there is excess moisture exiting the combustion chamber.

Mar 10, 2012 | 2004 Dodge Intrepid

1 Answer

I got codes p0455,p1421,p1423,p0141


code P0455......... Evaporative emission system leak detected ( large leak ) check gas cap

code 1451...........secondary air system leak ( bank 2 ) check for vacuum leak

code 1423...........secondary air system leak ( bank 1 ) check for vacuum leak

code 0141...........02 sensor heater circuit ( bank 1, sensor 2 ) replace 02 sensor

Mar 02, 2011 | 1997 BMW 328

3 Answers

Reccieved P0141, P0147, P0340 as emission diagnostic trouble codes. What do these mean?


P0141....O2 Sensor Heater Circuit (Bank 1 Sensor 2)

P0142....O2 Sensor Circuit Malfunction (Bank 1 Sensor 3)

P0143....O2 Sensor Circuit Low Voltage (Bank 1 Sensor 3)

P0144....O2 Sensor Circuit High Voltage (Bank 1 Sensor 3)

P0145....O2 Sensor Circuit Slow Response (Bank 1 Sensor 3)

P0146....O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 3)

P0147....O2 Sensor Heater Circuit (Bank 1 Sensor 3)

P0340....Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor)

Sep 20, 2010 | 1997 GMC Sierra

2 Answers

Where are bank 1 sensor 1, bank 2 sensor 1, bank 1 sensor 2, and bank 2 sensor 2


bank one sensor 1 is the bank of cylinders that number 1 spark plug is located in, bank 2 the other side, this assumes u have a V8, the sensor one location is the sensors that are BEFORE THE CATALYTIC CONVERTER, the sensors referred to as sensor 2 are after the ones AFTER THE CATALYTIC CONVERTER IN THE EXHAUST SYSTEM.

Apr 28, 2010 | 2004 Jeep Grand Cherokee

1 Answer

Same issue as above, except on a 2002 Taurus.


P1131 (Fault Location) Heated oxygen sensor (HO2S) 1, bank 1, bank 1-not switching, fuel trim (FT) weak mixture (Probably Cause) Wiring, intake/fuel system, HO2S, EGR system, oil level, camshaft timing, cylinder compression, ECM. Could be any one of these. Is your oil level ok on your dip stick?

Jul 31, 2009 | 2002 Ford Escape

3 Answers

Bank 1 burning to lean check engine light on flunked state emissions


It is a common problem, you will have to change bank 1, o2 sensor as it is covered in burnt oil and fuel telling the computer to run lean.
hope this help

Jul 07, 2008 | 1997 Ford Expedition

Not finding what you are looking for?
1996 Cadillac Eldorado Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...