Question about 2002 Chrysler 300M

Open Question

How do I remove the Catalytic Converter from my 2002 300M Chrysler?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Angel rondon

  • 99 Answers

SOURCE: replacing the catalytic converter on 2002 GMC Yukon

From LustyKid:

What may appear to be correct, can actually be INCORRECT. If you removed without touching the other two components, you definitely have the WRONG ONE.

Personally, I have never heard of having to remove torsion bars or oil pans to replace catalic conv.
If still in doubt. Let MIDAS do the job. Save yourself aggrevation. Unless you are really handy which you appear to be since you were able to remove it. Installing would be the reverse, provided you have the correct part. Suggest you take your vin number next time to the place where you bought it, they should be able to give you the correct one. If not, replace with OEM. Aftermarkets sometimes cause vehicle to fail emissions test. Goooooooooood Luck!

Posted on Dec 02, 2008

Ad
zolo6321

Michael Lewis

  • 7 Answers

SOURCE: 99 Isuzu Rodeo 3.2L 2wd Catalytic Converter instructions

you're having the same problem i had with my 99 isuzu rodeo 2 wd 3.2 i paid a muffler guy over $600 to replace those catalytic converters, if you're good at welding you could do the welding yourself after buying the catalytics, basiclly i seen them just cut them off and welded them back on

Posted on Dec 31, 2008

jgwhomeequip

Jeremy Reddick

  • 1902 Answers

SOURCE: converter recall 2002

http://nhtsa.gov/
You can try this website they have all the info on all the recalls within the last 8 years. Anything after 8 years the recall is voided Hope this works for you

Posted on May 21, 2009

Anonymous

  • 2 Answers

SOURCE: replacing catalytic converter on a 2002 Honda Odyssey

i have 2002 honda odyssey
engine and tcs light come on after driving 10-15 miles with code p0131, p0132,p0136,p0137

please help me fix my car problem

Posted on Sep 09, 2009

chris quammen

  • 811 Answers

SOURCE: Catalytic Converter for Honda CRV 2002- cost/necessity of repair

run scanner for trouble codes, some auto parts stores will do this for free

Posted on Oct 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many oxygen sensors are in bank 1 on 2012 chrysler town & country


If I remember correctly, you should have three sensors total. You will have an upstream bank 1 and an upstream bank 2 and then a downstream after the catalytic converter.

Sep 13, 2018 | Chrysler Cars & Trucks

1 Answer

Where is the starter located on a 2011 Chrysler town and country


You have remove Catalytic Converter and Engine mountes to get to the Starter.
This is the procedure

  1. Disconnect and isolate the negative battery cable.
  2. Remove the catalytic converter (3) See: Engine, Cooling and Exhaust\Exhaust System\Catalytic Converter\Service and Repair\Catalytic Converter - Removal.
  3. Remove the front engine mount through bolt.
  4. Remove the retainers (2) from the front engine mount bracket (1) and remove the bracket.
  5. Remove the field generator connector (1).
  6. Remove the B+ retainer (2) and B+ cable (3).
  7. Remove the stater retainers (1).
  8. Remove the starter (2).


I’m happy to assist further over the phone at https://www.6ya.com/expert/uttamjeet_2f3adc18600f8ede

Aug 27, 2017 | 2011 Chrysler Town and Country

1 Answer

2001 chrysler sebring 3.0l lxi. what do this code po421 mean


DTC P0421: Warm up Catalyst Efficiency Bank 1 Below Threshold
  1. Sensor or solenoid faulty
  2. Connector terminal contact damaged/corroded
  3. Wire harness fault. Check for correct voltage, open, short to ground or short to voltage
  4. Control unit software needs updating
  5. PCM or ECM faulty
  6. HO2S sensor contaminated/damaged
  7. Exhaust leaks or restrictions
  8. Catalytic converter damage
  9. Catalytic converter operating incorrectly

May 19, 2017 | 2001 Chrysler Sebring

2 Answers

What could be causing my 2000 Chrysler 300m to start up but I have to pump the gas to keep it running and when i do this it backfires


Hi sounds like a blocked main jet in the carby :::: a good tune up might fix youre problem with it backfiring ::::,& replace the fuel filter : Cheers

Oct 28, 2016 | Chrysler Cars & Trucks

1 Answer

Check Engine Light Codes 2003 Chrysler sebring lx Code 0432


It's not that simple, this code is a catalytic converter efficiency code. Possible causes are bad Oxygen sensor or bad catalytic converter. You will need to have a competent Technician determine which one.

Dec 14, 2015 | Chrysler Cars & Trucks

2 Answers

Where is the starter on the chrysler sebring 2002


The starter is located on the front of the engine, right above the front motor mount and between the catalytic converter and the engine block.

Mar 28, 2013 | 2002 Chrysler Sebring

2 Answers

I have an 1998 Chevy Blazer and need to change the catalytic converter, are the flange bolts welded and can i cut them


Catalytic Converter Removal & Installation 2.2L Engine To Remove:
Catalytic converter 2.2L engine gm-03-22-734.gif

  1. Raise and safely support the vehicle.
  2. Disconnect the heated oxygen sensor (HO2S) electrical connector.
  3. Remove the exhaust manifold pipe flange mounting nuts from the catalytic converter.
  4. Remove the catalytic converter flange mounting nuts from the muffler.
  5. Remove the catalytic converter from the muffler.
  6. Remove the catalytic converter from the rear hanger bracket insulator.
  7. Remove the catalytic converter.
  8. Remove the (HO2S) from the catalytic converter.
To Install:
  1. Install the (HO2S) to the catalytic converter.
  2. Install a new gasket and the catalytic converter to the muffler.
  3. Install catalytic converter to the catalytic converter hanger.
  4. Install the catalytic converter flange mounting nuts to the muffler flange.
    • Tighten to 26 ft lbs (35 Nm).
  5. Install the catalytic converter flange mounting nuts to the exhaust manifold pipe flange.
    • Tighten to 26 ft lbs (35 Nm).
  6. Connect the heated oxygen sensor (HO2S) electrical connector.
  7. Lower the vehicle.
------ Catalytic Converter Removal & Installation 4.3L Engine To Remove:
  1. Raise and safely support the vehicle.
  2. Raise and support the transmission.
  3. Remove the transmission support
  4. Disconnect the left and right pre-converter heated oxygen sensor (HO2S) electrical connector.
  5. Disconnect the post-converter (HO2S) connector. Muffler flange and gasket gm-03-43-731.gif

  6. Remove the catalytic converter flange mounting nuts from the muffler.
  7. Remove the catalytic converter from the muffler.
  8. Remove the exhaust manifold flange mounting nuts from the catalytic converter. Catalytic converter 4.3L engine gm-03-43-735.gif

  9. Remove the catalytic converter from the support bracket insulator.
  10. Remove the catalytic converter and gaskets.
  11. Remove the heated oxygen sensor.
To Install:
  1. Install the heated oxygen sensors as needed.
  2. Install a new gasket and the Install the catalytic converter to the support bracket insulator.
  3. Install the catalytic converter to the exhaust manifold flange. Install the mounting nuts.
    • Tighten to 39 ft lbs (53 Nm).
  4. Using a new flange gasket, install the catalytic converter to the muffler. Install the mounting nuts.
    • Tighten to 30 ft lbs (40 Nm).
  5. Connect the left and right pre-converter heated oxygen sensor (HO2S) electrical connectors.
  6. Connect the post-converter (HO2S) electrical connector.
  7. Install the transmission support.
  8. Lower the transmission.
  9. Lower the vehicle.
prev.gif next.gif ---
It looks like you can cut them and replace them with new bolts and nuts.prev.gif next.gif

Sep 05, 2010 | 1998 Chevrolet Blazer

1 Answer

Where is the cadalytic converter located on a 1994 chrysler lebaron?


The catalytic converter on your Lebaron is the section of pipe attached to the exhaust manifold. The converter its self is running at about a 45 degree angle up to the engine.

Aug 28, 2010 | 1994 Chrysler LeBaron

1 Answer

1990 chrysler lebaron goes into limp mode have to stop car restart and problems stop temporarily


The symptoms you describe, "limp mode", no check engine light, after a restart you get a temporary cure, and the year of your vehicle, tell me your catalytic converter is becoming clogged.

As your vehicle warms, the exhaust pressure builds and can't properly escape through the catalytic converter. When you turn the vehicle off, the pressure slowly releases, and when restarted it will run ok again until the pressure builds.

I would replace the catalytic converter, and that should resolve your issue.

I hope this information helps you, and I wish you luck on your repair.

Apr 28, 2009 | 1990 Chrysler LeBaron

Not finding what you are looking for?
2002 Chrysler 300M Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...