Question about 2001 Toyota Sienna
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The first thing to check is the fuse that controls that door's motor. Look in your manual for the fuse chart. Determine where the fuse panel is and which fuse it is. Pull that fuse and take a close look to see if it has blown. If so, replace it with a new one of the same amperage
Posted on Apr 11, 2009
Not 100% sure on yours but normally you'll either have a couple of bolts way down under seat cushion at front, near floor, or in some cases, you have to push seat cushion back toward rear window, hard & lift, to pop it out of notched catch under it.
Posted on Mar 14, 2009
I have a 2001 Sienna and have had to replace most of my tail light bulbs.
The bulbs that are mounted in the fender (wrap arounds) have acess panels in the van's interior that easily pop out and expose the back of the light assembly.
However, the bulbs that are found in the lift gate are a different matter. You have to remove the whole interior panel to the lift gate to expose the light assemblies. Go to your auto parts store and get a tool to help pop out the plastic retainers from the lift gates metal frame. Don't force the retainers out. Go slowly and gently so that you don't damage the interior panel. If you are really gentle you might even get to reuse the retainers.
Posted on Jul 01, 2009
These seats are hard to get in and out, especially if the receiver hook on the floor has any obstruction; so first thing is to clear out anything that may be interfering with the seat from properly seating in the front hooks.
This fix applies to seats that are stuck and won't come out as well as seats that won't go back in.
Each seat has two levers on their back, marked; one for 'tumble' and the other for remove. Problem is, if you press the 'tumble' lever when the seat is out it may not let you replace the seat without first holding BOTH levers up while pushing the seat back into place, then pushing the seat DOWNWARD to reset the mechanism for tumble. Then, push the seat down so that the locking mechanism for tumble (a black lever under and on the drivers side of the seat).
If the receiver hooks are clear and the seat retainer mechanism is properly set you will be able to push the seat in and press down on the back of the seat and hear a very satisfying thunk that lets you know the seat is properly locked in.
These seats can handle quite a bit of shoving and jamming, and you may just have to work it hard to get them back into place.
Posted on Aug 11, 2009
yes you will have to remove the rear seat. the bottom of the seat pulls straight up and out. the back of the seat has twelve mm bolts holding it at the bottom. once those are removed you lift straight up and out, its hooked at top.
Posted on Oct 15, 2009
Tips for a great answer:
Feb 27, 2011 | 2008 Toyota Sienna
Sep 28, 2010 | 2000 Toyota Sienna
Jun 10, 2010 | 2008 Toyota Sienna
Mar 06, 2018 | 2008 Toyota Sienna
To start, the noun "''rear latch switch'' is incorrect. It's actually called "Slide Door Lock". It's located on page BO-20 of the Toyota Repair Manual for the 2001 Sienna. There are two door locks on one sliding door. One in the front and one in the rear. Obviously, you want the one in the rear. The location for the "Slide Door Lock" (which also contains an electric switch) is in the rear of the sliding door located mid way up door. You can see (sliding door opened from the back) it without dissembling the door. And, the lock is made up of plastic (dirty white in color).
Mar 06, 2010 | 2001 Toyota Sienna
Mar 06, 2010 | 2001 Toyota Sienna
Jun 13, 2009 | 2000 Toyota Sienna
Apr 23, 2009 | 2004 Toyota Sienna
Oct 26, 2008 | 2001 Toyota Sienna
491 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: