Question about Chevrolet Silverado 2500HD

1 Answer

Thanks for the diagram on the differential i could find a lot on the 1/2 ton truck but nothing on the 3/4 ton the problem that i have is there is a very loud berring noise that sounds like it is comming from the rear end it gose away when i slow down with a load on the trans an rear end speed up or push the cluch in an take the load off or maintaine speed an the sound stays the same going right or left dos nothing to change it also i was wondering how much play should there be in the rear end gears seems to have some in the ring gear an plantary gears i rased the axel off the ground the rear end has a clicking sound when i spin the wheels

Posted by on

  • gregz671 Oct 24, 2010

    Thanks that was what i had figured it was i will have to take it apart an find out

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,317 Answers

It sounds like you have a worn ring and pinion gear. There shouldn't be much play with those gears. Also sounds like you might have some bad differential bearings also. You may want to consider replacing the rear end. It is rather involved to replace the ring and pinion, to get the ring and pinion adjusted properly. Would involve shims and using a dial indicator.

Posted on Oct 23, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a firing order for a 1975 ford econoline 150. Please!


1975 Ford Truck E150 1/2 ton Van 4.9L 1BL OHV 6cyl

The Firing Order

Select the part number to view the diagram.Firing order 1-5-3-6-2-4 -------------front ' ' of ' 1 2 3 4 5 6 ' vehicle '' Distributor rotates clockwise ------------

1975 Ford Truck E150 1/2 ton Van 5.8L 2BL OHV 8cyl

The Firing Order

Select the part number to view the diagram.Firing order 1-3-7-2-6-5-4-8 ---------front ' 1 2 3 4 ' of ' ' distributorrotates counter vehicle ' 5 6 7 8 ' clockwise---------

Sep 30, 2016 | Ford Cars & Trucks

1 Answer

I have a 1993 chevy 1/2 ton pickup with 5.7 liter and I cant get the four wheel drive to work when i put it into four whell the rear wheels alternate when slipping as they should but nothing from the front...


First of all try checking your fuse box and make sure the 4X4 fuse is still good. If the fuse is good, move the shift lever for the 4X4 on the floor into 4 high, then get a friend to watch underneath when you move the vehicle a little bit to see if the front driveshaft is turning. If the front shaft going to your differential is turning the problem is probably the electric actuator on the differential.

Dec 04, 2009 | 1993 Chevrolet K1500

1 Answer

Sprak plug Wires Need To Be Installed Correctly


You have several RAM sub-models in here:
Normal 0 21 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} B1500 RAM Van
B2500 RAM Van
B3500 RAM Van
RAM 1500 1/2 ton 2WD
RAM 1500 1/2 ton 4WD
RAM 2500 3/4 ton 2WD
RAM 2500 3/4 ton 4WD
RAM 3500 1 ton 2WD
RAM 3500 1 ton 4WD

Chrysler Full-Size Trucks 1989-1996 Repair Guide
To avoid confusion, remove and tag the wires one at a time for replacement.


f160dd3.jpg


Fig. 1: 2.5L 4-cylinder Engine. Engine Firing Order: 1-3-4-2. Distributor Rotation: Clockwise


a1a8242.jpg

Fig. 2: 3.9L V6 Engine. Engine Firing Order: 1-6-5-4-3-2. Distributor Rotation: Clockwise


dc6748e.jpg

Fig. 3: 5.2L and 5.9L V8 Engines. Engine Firing Order: 1-8-4-3-6-5-7-2. Distributor Rotation: Clockwise


832c92e.jpg

Fig. 4: 8.0L V10 Engine. Engine Firing Order: 1-10-9-4-3-6-5-8-7-2. Distributorless Ignition


Hope helped with this (remember rated this help) Good luck.

Nov 06, 2009 | 1996 Dodge Ram

1 Answer

I need a wiring diagram for 1987 Chevrolet 3/4 ton


The Haynes repair manuals usuall have wiring diagrams in the back of book.Around $20.

Oct 16, 2009 | 1990 Chevrolet Crew Cab

3 Answers

I need a diagram of the fuse layout for an '82 Chevy 3/4 ton c20


If you send me your email I can send you a pic of the fuse block on a 83 which I believe will be the same as yours. Unless you can tell me how to send a picture on here.

Aug 05, 2009 | 1999 Chevrolet Tahoe

1 Answer

2000 dodge ram 1500 on a 4:10 differential witch transsmition use


I got the info on page from a dodge ram parts seller but I forgot the enet address sorry, any ways thanks a lot.

Dec 08, 2008 | 2000 Dodge Ram 1500 Truck

1 Answer

Is my truck 1/2 ton or 3/4?


Hi Kimberly. I have the same model. The F-250 is a 3/4 ton truck, and more than capable of pulling your horse trailer safely.

Nov 21, 2008 | 2003 Ford F250 Super Duty Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...