Question about 1991 Mercedes-Benz E-Class
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
sounds like the starter is bad. try to hit the starter with a hammer - that will free up the starter - then try and start it. if it starts after that then i would replace the starter asap. also make sure the battery has full power - lights dont take as many amps as the starter so you could have lights but not enough to start it.
Posted on Mar 29, 2009
Mercedes has a cold start valve to spray extra fuel to assist the ignition when the temperature is cold. This is the problem with the cold start valve is not opened when it needed. There are 2 possible causes:
1- The valve is bad.
2- The coolant temperature sensor is bad.
The valve part is expensive and labor is not cheap. The first economic way to address is to replace the coolant temperature sensor. This sensor gives a different resistance reading as temperature changed. When it is bad, it give an erratic reading at cold temperature so the ECM could not recognize to give a signal to open the Cold start valve.
Posted on Nov 09, 2009
the onboard settings are stored in a memory bank. you will lose no info on your settings. all cars have a default mode the car goes back to. you will have to set your clock though. good luck
Posted on May 07, 2010
Tips for a great answer:
May 16, 2018 | Mercedes-Benz C-Class Cars & Trucks
May 12, 2017 | Cars & Trucks
Nov 08, 2014 | Cars & Trucks
Mar 18, 2013 | Mercedes-Benz Cars & Trucks
Aug 03, 2010 | 1984 Mercedes-Benz Mercedes Benz 300 Class
Apr 12, 2010 | 1999 Mercedes-Benz M-Class
Mar 05, 2010 | 1993 Mercedes-Benz Mercedes Benz Sl Class
Mar 14, 2009 | 2001 Mercedes-Benz E-Class
Nov 23, 2008 | 1992 Mercedes-Benz Mercedes Benz 300 Class
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: