Question about 1998 Dodge Caravan

1 Answer

Wipers dont work fuse is ok i have removed the switch how do i test it

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 760 Answers

Check to see with a test light if your getting power to the switch,if you are replace switch,if you are not check fuse and relay.and then check wiper motor.










TIM............









Posted on Oct 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Winsheild wiper will not work


The wiper control module is probably at fault ,without test that is just a guess . The wiper/washer switch is a input to the wiper control module. Do you know anything about automotive electronics an electrical systems ?
  • The Wipers are Inoperative
  • Fuse.
  • Wiper motor.
  • Multi-function switch.
  • Circuitry.
  • Wiper control module.
  • GO to Pinpoint Test B .

Voltage drop testing the power an ground circuits for the wiper control module would be a good place to start . Do you know how to test electrical circuits with a volt meter ?
PINPOINT TEST B: THE WIPERS ARE INOPERATIVE CONDITIONS DETAILS/RESULTS/ACTIONS B1 CHECK FUSE JUNCTION PANEL FUSE 16 (30A)
Fuse 16 (30A)

  • Is the fuse OK?
Yes GO to B2 .

No REPLACE the fuse. TEST the system for normal operation. If the fuse fails again, CHECK for a short to ground. REPAIR as necessary. B2 CHECK FOR VOLTAGE TO THE WIPER CONTROL MODULE - CIRCUIT 65 (DG)
Wiper Control Module C294
Measure the voltage between wiper control module C294-2, circuit 65 (DG), and ground; and between wiper control module C294-11, circuit 65 (DG), and ground.
  • Is the voltage greater than 10 volts?
Yes GO to B3 .

No REPAIR circuit 65 (DG). TEST the system for normal operation. B3 CHECK CIRCUIT 57 (BK) FOR OPEN Measure the resistance between wiper control module C294-3, circuit 57 (BK), and ground; and between wiper control module C294-5, circuit 57 (BK), and ground.
  • Are the resistances less than 5 ohms?
Yes GO to B4 .

No REPAIR circuit 57 (BK). TEST the system for normal operation. B4 CHECK THE MULTI-FUNCTION SWITCH
Multi-Function Switch
Check the multi-function switch; refer to Section 211-05 .
  • Is the multi-function switch OK?
Yes GO to B5 .

No REPLACE the multi-function switch; REFER to Section 211-05 . TEST the system for normal operation. B5 CHECK CIRCUIT 993 (BR/W) FOR OPEN Measure the resistance between multi-function switch C269-4, circuit 993 (BR/W), and wiper control module C294-7, circuit 993 (BR/W).
  • Is the resistance less than 5 ohms?
Yes GO to B6 .

No REPAIR circuit 993 (BR/W). TEST the system for normal operation. B6 CHECK CIRCUIT 589 (O) FOR OPEN Measure the resistance between multi-function switch C269-1, circuit 589 (O), and wiper control module C294-1, circuit 589 (O).
  • Is the resistance less than 5 ohms?
Yes GO to B7 .

No REPAIR circuit 589 (O). TEST the system for normal operation. B7 CHECK THE WIPER CONTROL MODULE OUTPUT FOR VOLTAGE
Wiper Control Module C294

Wiper Motor C152
Turn the multi-function switch to the HI position. Measure the voltage between wiper motor C152-4, circuit 57 (BK), and wiper motor C152-3, circuit 56 (DB/O).
  • Is the voltage greater than 10 volts?
Yes REPLACE the wiper motor; REFER to Motor-Windshield Wiper . TEST the system for normal operation.

No GO to B8 . B8 CHECK CIRCUIT 57 (BK) FOR OPEN Measure the resistance between wiper motor C152-4, circuit 57 (BK), and ground.
  • Is the resistance less than 5 ohms?
Yes REPLACE the wiper control module; REFER to Module-Windshield Wiper . TEST the system for normal operation.

No REPAIR circuit 57 (BK). TEST the system for normal operation.

Jun 29, 2017 | 2002 Lincoln Town Car

1 Answer

Rear wiper motor does not work fuse is ok honda crv 2003


About rear wiper, if the fuse is OK, I suggest test the switch, the wires and voltage at/from motor; finally, test motor, possible go to bad.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Aug 22, 2012 | 2003 Honda CR-V

2 Answers

Windshield wipers on 1986 Ford Ranger stopped working


unplug the wire at the wiper motor and then turn the key on and then turn the wiper switch on and test the wires at the plug with a 12 volt tester . if u dont have any thing then ur wiper switch is bad , if u have juice at the plug then it sounds like its the motor.

Jul 13, 2012 | 1986 Ford Ranger 2WD

2 Answers

Windshield wipers stopped working on a 2004 Dodge Dakota. The fuse tests good for continuity.


If the fuses are OK, then two choice to check there:
* Faulty Wiper Motor.
Check if activated switch, you have voltage in the wires wiper motor; if have voltage, then the motor is bad. If dont have voltage, then switch is bad.

* Faulty Wiper Switch.
The multi-function switch cannot be adjusted or repaired. If any function of the switch is faulty, or if the switch is damaged, the entire switch unit must be replaced.

Hope helps; keep us updated.

Dec 14, 2010 | Dodge Dakota Cars & Trucks

2 Answers

Front windshild wiper is not working but back ones are. what is my problem?


The fuse could be blown, or the motor could be bad, or the switch may be bad, or the wiring in between.

Oct 12, 2010 | 2001 Ford Windstar

1 Answer

Windshild wipers stop working


CHECK FUSE IF FUSE GOOD.HOOK A JUMPER WIRE TO GROUND AND GROUND WIPER MOTOR.TURN WIPER SWITCH ON IF WIPERS WORKS YOU HAVE TO FIX GROUND CONNECTION. IF WIPER STILL DONT WORK.REMOVE THE COWL COVER.TURN WIPER SWITCH ON TO SEE IF POWER GOING TO WIPER MOTOR IF YES.REMOVE WIPER MOTOR HOTWIRE IT.IF WIPER MOTOR DONT WORK REPLACE IT.IF WIPER MOTOR DO WORK CHECK FOR BINDING OR DAMAGE LINKAGES.IF POWER NOT GOING TO WIPER MOTOR AND FUSE GOOD.WIPER SWITCH FAULTY OR IT HAS BROKEN WIRE FROM SWITCH TO WIPER MOTOR.

Oct 04, 2010 | 2002 Toyota Avalon

1 Answer

Neon wiper trouble


https://s24.postimg.org/g7k0yez1x/wiper.jpg

Click on the link
See the fuse, key on, use a test lite and check for voltage at fuse circuit, it should be hot.
See pins 4 and 5 at wiper motor, those wire colors should be voltage for hi and/or lo speed, use the test lite, check for voltage hi and or low speed on those wire colors.
At the moment, I think your wiper/washer switch is faulty?

Jul 09, 2017 | 2005 Dodge Neon

1 Answer

My rear wiper has stopped working on kia sportage 2006. can hear switch ok and fuse ok, how do i remove trim to get to rear wiper motor


Test for power at motor.


Test for power at motor. If you have power, then replace.wiper motor. trim should be held on with panel clips that can be removed with a special panel removal pliers






if

Mar 11, 2010 | 2002 Hyundai Santa Fe

1 Answer

Wiper motor problem


Check the Relay in the Battery Junction box it is the 3rd one from edn oposite if 3 small fuses close to it with a 5 amr fuse in the middle. Hope this helps it realy should from the sounds of it

PLEASE RATE My ANSWER

Dec 27, 2008 | 2005 Ford Taurus

1 Answer

1994 jeep cherokee larado


hi if you have changed the switch and the wiper motor and all the fuses are ok you only got the wiring and what is favourite the wiper relay switch try this first its cheap and is a problem on all cars not just yours if it fails to work i can give you some simple tests to find out what is or not working good on ya at least your having a go yates210456

Oct 02, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
1998 Dodge Caravan Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...