Question about Hyundai Accent

Open Question

How to change a clutch on a Hyundai Accent Coupe 1.3

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1665 Answers

SOURCE: How do you change the oil filter on a Hyundai Accent 1998/99?

CHANGING ENGINE OIL Be careful not to burn yourself, as the engine oil is hot. 1. Run the engine until it reaches normal operating temperature. 2. Stop the engine. 3. Remove the oil filler cap (on rocker cover) and the drain plug (on the oil pan). Drain the engine oil. x20-013a.gif 4. Re-install and tighten the drain plug to the specified torque. 5. Fill new engine oil through the oil filler. a. Cover the generator with a shop towel before pouring the engine oil to ensure that if oil spills, it will not drop on the generator. b. Use a funnel to pour in the engine oil. a181205a.gif 6. Install the oil filler cap. 7. Start and run the engine. 8. Stop the engine and then check the oil level. Add oil if necessary.

Posted on May 24, 2008

Ad
  • 566 Answers

SOURCE: Clutch pedal low near floor, can the clutch be adjusted?

hi the clutch on accent is hydraulic operation so if pedal is very low on disengaging clutch ? you may have a problem with the hydraulics 1st thing to check is fluid level? this is the reservoir that feeds both brakes and clutch but is seperaterated inside if fluid low? top up and bleed the slave cyl however if fluid low indicates a leak ? possibly slave cyl? if no loss of fluid ? then prob may be fault in the master cyl ? check fluid come back with any update please ps if this problem has just occured? check for leaks ?

Posted on Feb 02, 2009

  • 69 Answers

SOURCE: changing timing belt on 2004 hyundai accent

Sign up for an account on hmaservice.com. Once you do so, log in and click on "Shop". You can then enter your year/make/model and you will find the info under, engine mech. system>timing system>timing belt>repair procedures. Very detailed, and best of all, FREE.

Posted on May 27, 2009

  • 179 Answers

SOURCE: In a 2000 Hyundai accent, clutch fluid = brake fluid

Yes that is correct. it should say what type right on the lid. example dot 3 or dot 4.

Posted on Jul 06, 2009

  • 1 Answer

SOURCE: 1998 Hyundai Accent clutch pedal travel

its real hard to shift my accent in and out of all gears especially reverse the clutch pedal is right at the floor when i checked the fluid it was empty.it also makes a clanging noise going into reverse any ideas before i change the clutch?

Posted on Aug 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 94 Hyundai Excel. I am replacing the clutch but can't find the torque settings anywhere.


clutch/flywheel torque settings - Hyundai Forums : Hyundai Forum

www.hyundai-forums.com/...accent/146383-clutch-flywheel-torque-setti...

Aug 2, 2012 - 3 posts - ‎2 authors
Im after the torque setting for the clutch and fly wheel for a lc 2000 accent with the dohc 16v engine. cheers.Missing: .94

Torque value head bolts 1994 hyundai excel 1.5l - Fixya

www.fixya.com/cars/t12339610-torque_value_head_bolts_1994_hyundai
Apr 7, 2012 - SOURCE: torque settings for a hyundai accent 1500 1998. cylinder ...SOURCE: how d i change a clutch in a hyundai excel 1994. Hi first lift the ...

Flywheel & Pressure Plate Torque Specifications? - Hyundai ...

www.hyundaiaftermarket.org > ... > Engine, Intake, Exhaust

Dec 19, 2015 | Hyundai Cars & Trucks

3 Answers

Change a pollen filter hyundai coupe 2000 and


usually the pollen filter is located under the windshield in the shroud area or some place where air enters the cabin of the car check also your airfilter cannister it will be in or on the fire wall or door jam look carefully alos you can have the dealership or an auto parts store tell you the location of the part.

Jul 05, 2010 | 2000 Hyundai Accent

1 Answer

Accent coupe 1.3 whats best way to change the clutch, is it engine out or can it be done in situ


trust me, taking the drive unit out to fit a clutch is much easier than trying to lean over and f... about with bits all over the place.......

Apr 13, 2010 | 1999 Hyundai Accent

1 Answer

Hello I have just had a new clutch fitted into my Hyundai Accent Coupe (2000) and yet the thrust bearing is still noisy and it is notchy going into 2/3 gears and when dropping down from 5th to 4th - any...


if you used the car with a bad cluth you may have damaged the syncromesh, it nearly always happens in 3rd gear. Sounds like the fault, the syncromesh is part of the gearbox and most often cannot be fixed without a new gearbox.

Jan 13, 2010 | 2000 Hyundai Accent

2 Answers

Main beam not working on my hyundai accent coupe


Problem is either wiring or the bulbs... evident.

Oct 19, 2009 | 1999 Hyundai Accent

1 Answer

Correct tyre pressure hyundai accent coupe i


DEPENDING ON TYPE OF TYRES IT SHOULD BE 2.2BAR LOOK ON THE TYRE PRESSURE IS PRINTED ON THE TYRE

Jun 30, 2009 | Hyundai Motor 1998 Accent

1 Answer

My clutch needs changing on my 1998 hyundai accent coupe. do you have detailson how to do this or a diagram


This is a very big job. To get to the clutch the transaxle must be removed from the engine. Removing the transaxle involves removing: The exhaust pipe between the manifold and catalytic converter, the starter motor, a chassis cross member, both drive axles, and the tranmission shift linkage. Is there a highschool in your area with an autoshop class? The only other option is to have a repair shop do it. I would pay a shop to do the work. I think it's a good investment espesially if the rest of the car is in good condition. Good luck, Techjoel

Jun 07, 2009 | Hyundai Motor 1998 Accent

1 Answer

To change gears, I need to fully press down on my clutch pedal to stop a grinding noise on my hyundai accent 2001Can I adjust the clutch cable,


Hi and welcome to FixYa,

In a manual 2001 Hyundai Accent, the clutch cable could be adjusted. The adjustment point is on the cable 'pad' where it enters the firewall in the engine compartment.
86c2d7d.jpg
To adjust, the slack or free play must be decreased. This is done by turning the adjusting nut clockwise. Check back by pressing on the clutch pedal to your preference.
73309c3.jpg
Good luck and thank you for using FixYa.

Feb 18, 2009 | Hyundai Motor 1995 Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...