Question about 2000 Ford Focus

2 Answers

Ford Telstar Ignition Coil Specifications

Posted by on

  • Eckles Jun 08, 2008

    TELSTAR 1989 4cyl


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The year is 1996 and is a 2.0 litre and it a fe motor

Posted on Oct 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

I need the year and the engine size in order to answer your question.

Posted on Jun 08, 2008

  • fernando arevalo Jun 08, 2008

    unfortunatelly i have not information for fords telstart but i will give you a tip and hope this help. as you know 1 wire coming from the ignition swtch to feed the coil that's called positive ok if that one has power with the key on then test he negative side of ignition coil wire this way, unplug the ignition coil and then

    hook up you light tester to the positive side of the batterie and then the other end of tester to the negative side of ignition coil wire, at same time have some one cranck the car, then if the tester blinks while you crank the engine that means than the

    coil is bad but if you have not pulse or blink that means you have problems with ignition module or distribuitor goos luck and i hope and this help. i'm a mexican here in usa just trying to help you.

    good luck


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Manual Ford Telstar 1999 manual

ford /mazda clone
1999 end of the model only sold in japan

ford dropped telstar and went with mondeos

The last Telstar, based on the GF platform, was released in 1997, but was only sold in Japan,

rare repair manual to find
gregoroies haynes or chilton

if the car is out side japan as an import

this is the closest possible one to use

Ford Telstar & Mazda 626 Sedan & Hatch 1987-92 Wagon 1987-97 Repair Manual 2.0 2.2

no free bees or cd types online a
repair manuals are in book form
source from
ebay or other online repair manual sellers



Nov 03, 2016 | Ford Cars & Trucks

1 Answer

Ford telstar 2.0 16valve dohc timing and timing marks

Get a Haynes manual it's worth the cost if you want to DIY.

Apr 09, 2013 | Ford Cars & Trucks

1 Answer

Can't find fuse box for ford telstar 1987

look on the passenger side in frount or the door on the floor there is a removable kick plate if not its under the steering colum

Nov 25, 2012 | 1991 Ford Explorer

4 Answers

I am having two issues with my 2001 Ford Taur, the first is a code of P0715 and the other is P0302. We have replaced spark plugs, fuel filter, oil change and the car still sputters and is very hesitant....

P0302 code is a mifire for cyl #2, Check the ignition coil for the number 2 cylinder.
P0715 Turbine Shaft Speed Sensor Circuit Malfunction - With Automatic Transmission
Possible Causes Setting Conditions
* TSS connector is damaged (check pins for damage, and for moisture)
* TSS signal circuit is open, shorted to ground or shorted to voltage
* TSS has failed
* PCM (Powertrain Control Module) has failed

To test the ignition coil for the P0302 code
Turn the ignition OFF
Disconnect the negative battery cable.
Disconnect the wiring harness from the ignition coil.
Check for dirt, corrosion or damage on the terminals and repair as necessary. Measure coil primary resistance between ignition coil pin 4 (B+) and pins 1 (coil 2), 2 (coil 3) and 3 (coil 1)Resistance should be 0.3-1.0 ohms. If resistance is out of specifications, replace the coil pack. If resistance is within specifications, proceed to secondary windings testing.

May 04, 2011 | 2001 Ford Taurus

2 Answers

Where is the engine number on a 1988 ford telstar sedan

Where is the engine number on the 1993 Ford telstar 2.5 v6

Sep 02, 2010 | Ford Aspire Cars & Trucks

1 Answer

1990 ford telstar tx5 AT 2.2lt fuel injected motor

Is the spark plugs getting spark? Is it getting fuel?

Apr 17, 2010 | 1990 Ford F150

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

74311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers


Level 3 Expert

5426 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides