Re: the passanger side windows aren't going up and down....
The window assembly has metal and plastic parts inter mixed that attach the metal to the drive motor via a cable. It is hard to see you will need a mirror and a pair of pliers. But the window all the way down vai the switch and look for a metal round metal part on the cable. This has to fit in the window assembly track.
I did a little bending and my rear window now works great.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check you cylinder head gasket for water leeks my merc did the same thing the water jackets when on the cylinder head gasket went you dont loose power just a bit water but it comes out of the engine and down the sides doesent alway show up on the ground as a leek as the engines heat turns it to steam plus golfs and most oldish vw the heads are a ****** for going
oftan times its the master controle switch on the driver side that allows the power for the passanger sid the other comman problem is the harnes in the door jam has a broken wire or more than one take the pannel off the kick pannle off unplug the harness at the kick pannel take the rubber loom cover between the door and the rig loose pull some wire through so you can see it and find the break and repair hoped this helped
I'm affraid you will have to take the door pannel off and inspect the cable from the handle to the latch. Sometime the end of the handle breaks off and will not pull the cable to open the door....
During this past winter, I was driving my 98 Jetta GL and it suddenly shut down in the middle of the road. It restarted but would only go a little ways before doing the same thing. I got it checked out and it turns out I had to get new fuses. I knew someone who could put them in it was very cheap to fix.
Same thing happend to me, first it start with the window going up at turttle speed, and then suddenly t can go all the way up and hearinmg a clicking sound, that clicking sound is the arm of the elevator, they were broken, i just repolace the elevators