Question about 1991 Mitsubishi Mirage

1 Answer

Turn signals do not work

I cannot find a flasher unit besides the one for the emergency flashers, which DO work. The only manual I could find has every Mitsubishi model but mine. It has my year but not my wiring diagram, so I cannot find if there is a second flasher unit, separate from the one for the emergency flashers, and, if so, where it is located. All of my bulbs are good.

Posted by on

  • Beckas Jun 07, 2008

    I already checked the fuses and the signal switch on the column, is there another one?

  • Neil Wylie Aug 25, 2015

    The 91 lancer is the same wiring set up, the flasher unit is where the fuses are in side, front right side, by right leg and the flasher unit is a grey silver block a little bit smaller than a box of matches that just plugs in to the wiring loom up a bit higher up, and the emergency flasher works on a fuse in a block by the battery they are on separate system so one will or ways work yes so one can work with out the other

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 359 Answers

Pretty sure its the same flasher for both check your fuses and also your blinker switch.

Posted on Jun 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the flasher unit for 1999 mercury mountaineer?


It's the same flasher unit for both turn signals AND emergency flashers. Even though one side works, the other won't. If you have a good fuse for the turn signals, then replace the flasher unit.

Aug 04, 2014 | 1999 Mercury Mountaineer

1 Answer

Have hazards but no turn signals for 1994 ford econoline 250


Check your flasher units. Because of the load of all signals working under Emergency conditions, there are 2 flasher units.
The basic flasher may be bad and that is why the Emergency flasher still works.

Also try cycling the Emergency flashers about 20 times. Some designs share contacts between the 2 units and the prongs get misplaced which the Emergencies are used.

Oct 15, 2013 | 1994 Ford Econoline

1 Answer

My turning signal don't work but the flashers do work. I have changed all fuses and they still don't work.


since you know where the fuses are, you also know where the flashers are. the flashers are the same part so unplug the one for the emergency flasher and put it into the socket for the turn signals and vice versa. if the signals now work but not the emergency flasher you know to get a new flasher unit at any parts store. the flasher units are cubes about an inch on each side plugged into the fuse panel.

Jun 27, 2011 | 1995 Chevrolet Caprice Classic

2 Answers

1997 Chevy Blazer four way flashers working but no left or right turn signals work, help!


find your owners manual, use it to find your fuse panel, read the legend and locate the turn signal flasher and the emergency flasher, exchange them as they are identical. make a mental note to drop by a car parts store and pick up a replacement some day. when you get the replacement, put it in the signal flasher socket and put the old one back into the emergency flasher socket.

Jun 21, 2011 | 1997 Chevrolet Blazer

1 Answer

Turn on the car then click the signal light and nothing!!! no tic to light nothing could it be the signal light switch or a fuse?? please help!!


Try the flasher unit first, checking it costs nothing. Turn on your emergency flashers and if they work, get your owners manual and find the fuse panel locations. Inside the manual or the panel cover there will be a legend as to what is what. You will have two flasher units, one for turn signals and the other emergency flashers. They are the same units so just switch them, if your turn signals now work, but your flashers don't, then you have a bad flasher unit. Go buy another at any auto parts store and put it in the correct socket, you rarely use the emergency flashers so you want your new one in the turn signal circuit.

If that does not do it then you may have a broken switch which requires pulling the steering wheel off to fix. That is not an owner service thing. One bad light bulb is not going to knock them all out.

Jan 05, 2011 | Mercury Cougar Cars & Trucks

1 Answer

Blinkers wont work.all my lights turn on flashers work just no turn signals only front side markers what can it be?


This vehicle should have 2 flasher relays one that operates the emergency flashers and one operating the turn signals.Easiest way to locate these would be to turn the emergency flashers on and listen to where the clicking is coming from usually the flasher are pretty close to each other.Once you find the flasher unit you can swap the flasher unit that is working with the one that is not and if the turn signals work after that you will need to purchase another flasher relay.

May 27, 2010 | 1993 Buick LeSabre

1 Answer

Turning signals will work only when emergency flasher switch is set to the on position /also the emergency flashers do not work at all/


Check the flasher unit, switch the emergency flasher with signal flasher see if emergency will work. Possibly they run off same "double flasher", probably replace it.

Sep 17, 2009 | 1996 Ford Thunderbird LX

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

2 Answers

Blinkers stoped working


Please check to make sure that it isn't your flasher fuse. You may have the ability to exchange it with your emergency flasher unit. Turn on your emergency flasher to locate where this unit is installed under your dash. Make sure that the e-flasher unit and turn signal unit can be interchanged. If you are confident that they can be switched, go ahead and see if that solves your problem.

Dec 28, 2008 | 1998 Saturn SL

Not finding what you are looking for?
1991 Mitsubishi Mirage Logo

443 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

67757 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22005 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...