Question about 2005 Dodge Neon

1 Answer

Location of dodge neon 2005 oxygen sensor

I need the location of dodge neon 2005 oxygen sensor

Posted by on

  • 8 more comments 
  • Anonymous Sep 09, 2008

    the car doesnt shift up and is automatic and when it start it takes a while

  • Anonymous Mar 13, 2014

    2005 dodge neon diagrams

  • Anonymous Mar 13, 2014

    Water in blower box

  • Anonymous Mar 18, 2014

    Cannot find the location of the VSS.

  • Anonymous Mar 19, 2014

    changed throttle sensor and idle control valve, car won't go past 10mph and cuts off constantly, continues to read p0508

  • Anonymous Mar 23, 2014

    how to bleed slave cylinder

  • Anonymous Mar 23, 2014

    How do I bleed slave cylinder

  • Anonymous Mar 23, 2014

    i need to know how to set the timing

  • Anonymous Mar 27, 2014

    Where is it located

  • Anonymous Mar 30, 2014

    how do I change the gp Sorensen



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

  • Contributor
  • 1 Answer

Ask at the parts store where i bought the part

Posted on Jun 08, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2005 Dodge Neon SXT 2.0L crankshaft position sensor location to replace

P0315 - Crankshaft Position System Variation Not Learned
P0335 - Magnetic Crankshaft Position Sensor Electrical Error China OBD2 car diagnostic tools wholesale on CareUCar

Mar 20, 2014 | 2005 Dodge Neon SXT

1 Answer

2005 dodge neon idle.

Get the code. Codes never tell you to change a sensor, they just indicate the problem circuit they are seeing. Only sometimes it is a failure of the sensor.
You probably need test equipment like a digital voltmeter. Maybe join a neon forum to find out how others solved the problem.

May 25, 2017 | 2005 Dodge Neon SE

1 Answer

Where is the oil sensor located at on a 2005 dodge neon

oil pressure sending unit should be located on oil filter housing or on rear of the engine block at the transaxle end of the engine.

Apr 15, 2011 | 2005 Dodge Neon

1 Answer

2005 dodge neon, it has been jerking lately whenever i push the accelerator or the car has to go up a hill, or when im parked or stopped at a red light, has roughly 107,000miles on it

Here are 3 very common causes for the isuues you're having.

1. Dirty air filter.
2. Faulty MAF, ( mass air flow ), sensor.
3. Faulty oxygen sensor.

These 3 things prevent the on board computer from determining the proper fuel/air mix ratio, and leads to symtoms like, poor acceleration, poor MPG, loss of power, fack stalling, and stalling.

I hope this helps you.

Feb 16, 2011 | 2005 Dodge Neon

1 Answer

Need to know where O2 sensor is located on a 2005 Dodge Grand Caravan.

There are two oxygen sensors: one is upstream of the catalytic converter and one downstream of the catalytic converter. The oxygen sensor, or O2 sensor is usually located near the catalytic converter.Oxygen sensor downstream of the catalytic converter in the exhaust system on the back of the engine. ------- Thanks.Helpmech

Nov 15, 2010 | 2005 Dodge Grand Caravan

1 Answer

2005 Dodge Neon looses power.

if your standing in front of the car facing the engine. It's on the right side behind the rear of the head. It's square with 4 10mm bolts and a plug in thats a pain to get unpluged sometimes.

Jan 13, 2010 | 2005 Dodge Neon

1 Answer

Where is the crankshaft sensor located in a 2005 dodge neon

I could be wrong but look for a cam sensor shaped thing at the back of the cylinder head (left side relative to car)

Apr 24, 2009 | 2005 Dodge Neon

1 Answer

Locating and replacing a camshaft sensor in a 2005 dodge neon

this is a very very simple procedure. you do not need pics. there is a sensor located at the end of the engine on the far side from the belts. at the top. it has a plug with two wires in it. just remove the two 10mm bolts un hook the plug and reverse the process to reinstall. if you have a factory intake you may have to remove it to access this sensor. just the intake tube.

Apr 18, 2009 | 1996 Mercury Sable

2 Answers

Oxygen sensor 95 dodge neon

Yes, Any reading beyond the specification is bad.
The oxygen sensor reads in milli volts. I would have the Oxygen sensor changed out first. Then I would have the system reset.

Mar 15, 2009 | 1995 Dodge Neon

Not finding what you are looking for?
2005 Dodge Neon Logo

Related Topics:

843 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides