Question about 2001 Chrysler Sebring

1 Answer

Air conditioner problems after replacing alternetor belt

2001 sebring


My alternator belt broke and i replaced it and now my air conditioner makes a weird noise like it is going to break the belt but it only does this when it is off.


Thank You

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 87 Answers

Clutch bearing on the a/c unit or there is belt shredds in tn behind the front part of the clutch..

Posted on Jun 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt routing for 2001 Sebring 2.4 engine


Jeff, Check the attached links for your 2.4 belt routing,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Repair Guides Engine Mechanical Components Accessory Drive Belts 2...
How to Change Serpentine Belt on 2002 Chrysler Sebring
http://www.serpentinebeltdiagram.com/serpentine-belt-diagram-2001-chrysler-sebring-4-cylinder-24-liter-engine-alternator-and-air-conditioner-with-dohc-engine-02236

Jul 31, 2016 | Cars & Trucks

1 Answer

Changing alternator on 2001 chrysler sebring convertible do you have to disconnect the air conditioning to change the alternator


Should just be the serpentine belt and then the alternator, it is a little tight to work area wise.

May 24, 2015 | Chrysler Sebring Cars & Trucks

1 Answer

How do I replace a serpentine belt bypassing the air conditioner ... I am not using the air conditioner pulley at all.


Odds are you can't. The ac compressor is mounted in the belt routing so it would need the pulley to keep the belt tight.
You can get a used compressor from a salvage yard and mount it in place of your old part if necessary. It will allow the belt to run even if it has no freon in the system.
There are a few vehicles that a replacement dummy pulley was designed for, but I am not aware of one for your vehicle. Usually if you try to run the belt without the compressor pulley, it will rub against something or not allow the belt to run in the right direction.

Mar 14, 2015 | 2001 Mercury Sable

2 Answers

2001 Dodge Dakota replacement serpentine belt too short (w/o air)


Just tell parts place that you need 90" belt last three number's on belt part number's should end with 900 if you need one more inch last three number's should end with 910. good luck.

Nov 28, 2009 | 2001 Dodge Dakota

1 Answer

2001 Toyota 4runner Limited Alternator belt broke.


simple really 12mm wrench an socket and 14 mm wrench an socket. lossen alt bracket 14mm then tesioner 12mm slide back drop belt and reverse. unless condensioner belt in way then dro 12 mm bolts on shiled then back off 12mm bolts on condensioner pulley remove belt follow previous instructions

Nov 22, 2009 | 2001 Toyota 4Runner

2 Answers

Serpentine belt replacement


Yes, when you go and get youre replacement belt, just make sure you get the belt for your engine that does NOT include the AC. It will not hurt anything by doing this. The only problem that may arise is when installing the new belt, make sure you install it the correct way.

Aug 09, 2009 | 2005 Lincoln Aviator

2 Answers

Alternator won't work, hit with hammer, will work. What is bad?


SOUND LIKE THE VOLTAGE REGULATOR BUT IT IS JUST AS CHEAP TO REPLACE THE ALTERNETOR

Jul 10, 2009 | 2001 Chevrolet Suburban

3 Answers

RE: 2001 Nissan Altima air conditioner


Sounds to me like you need the alternator idler pulley. Look at it and see if it has a big washer covering portion of the pulley, or if the washer is inside the pulley. If its inside, than you have an old pulley. Replace it with the one, that has the big washer in the middle of pulley. You do have another idler for the A/C compressor. Those I have seen fail also. But 80% of the time its the alternator idler pulley.

Jul 14, 2008 | 2001 Nissan Altima

1 Answer

Replace alternator


Remove the neg. {black} battery cable. Disconect the two sets of wires from the alternator {one is bolted onto a post, the other is a plug}. Remove the tension on the belt buy moving the tensioner with a wrench or the special tool. {the tensioner is a pulley on a spring loaded arm bolted to the block, refer to the belt routing sticker under the hood} Remove the three or four bolts that mount the alternetor and remove it. The instal is the reverse of removal, the belt tension is self adjusting. Make sure the battery is charged.

May 15, 2008 | 1997 Pontiac Sunfire

Not finding what you are looking for?
2001 Chrysler Sebring Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...