Question about 2000 Honda Civic

1 Answer

CODE ON MY HONDA CIVIC READS TUNE UP IT HAS ALREADY BEEN TUNED

WAS TUNED UP AND LIGHT CAME BACK ON WHAT CODE DO i USE TO GET IT TO GO OUT

Posted by on

  • cseanw May 11, 2010

    What was the code and was it a Honda or OBD II code? Also what model and year is the car? You may just need to pull a certain fuse or disconnect battery but will need to have radio code to use it again.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had this problem when I replaced the battery. The code is actually located inside your glove box. You have to look pretty carefully but its a 4 or 5 digit code. You enter it into the radio and wala!:) works again. Some models have to code in different local's you can google your car and find where to code is located. It took a minute to find online but be patient.:) Some one else has had the same problem. thats just for the radio. Ive heard that if turn your ignition to the second slot the one right before the car starts and leave it there until the check engine/oil light goes off. Do it ten times or so and it supposedly resets everything. Good luck!

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1997 Honda Civic 4 door my dash lights are out and the dinging to my headlights is not coming on and I checked every light bulb and every fuse I don't know what to . Is is the dimmer switch


HONDA ILLUMINATION NOT WORKING * HOW TO FIX ...

? 3:24
https://www.youtube.com/watch?v=oOHwDWjmYWU
Feb 28, 2011 - Uploaded by vehix411
No lights,cant see the dash lights,bad bulb,how to change bulb clucter ... i have a 2001 honda civic i installed a new radio andmy cluster lights are ... I just bought the computer or (multiplexer whatever) for my 1997 accord because my back tail lights won't turn on but I ... Martin Nikolov 4 months ago (edited).

Removing a Honda Civic instrument cluster - YouTube

? 4:01
https://www.youtube.com/watch?v=kzp1VqdlmU0
Oct 28, 2012 - Uploaded by mike937739
George L 4 months ago ... I used it to fix my burnt out check engine light bulb in my 97 civic. ... I have no light on my dashboard I already replaced the fuse but still nothing? so I'm ....2005 Civic cluster in 1997 Civic working!

1997 Honda Civic Instrument Panel Lights Problem ...

? 1:26
https://www.youtube.com/watch?v=mYVt93Rao6g
Mar 26, 2013 - Uploaded by fockyoumang


Dec 16, 2015 | Honda Cars & Trucks

1 Answer

Check engine light stays on


Go to Autozone and have them scan it for free. They'll give you a slip that has the code and possible issues with the car. Many times it'll be an oxygen sensor or catalytic converter. You can try resetting the code and see if it comes back. They can do that through the scanner at Autozone. It's a nice service they provide. Also, check to see if your engine needs to be tuned up. My 2000 Honda Odyssey had a check engine light around 105k and I had the parts to tune up (plugs). After replacing the plugs and resetting the check engine light the check engine light never came back.

Dec 06, 2011 | 2004 Honda CR-V

1 Answer

I have a 1997 honda civic that came up with a OBD code of PO441 after the engine light came on. do you know what the code is and what is wrong. Thank's


Here is what the code reads:

P0441 Evaporative Emission Control System Incorrect Purge Flow
It could be plugged, loose or cracked vac lines.

May 19, 2010 | 1997 Honda Civic

1 Answer

Honda Civic 2007 Civic . Cahange wheel bearing and


sorry to tell you this but it sounds like the wheel bearing was put in backwards on one or both sides. the front wheel bearings have a black speed ring built in and that is what your speed sensor reads off. - this is common as the front bearings will install either way- hope this helps

Dec 12, 2009 | 2007 Honda Civic GX NGV Sedan

2 Answers

2005 honda civic stereo won't turn on - screen reads "2 Erre"


first try diconnecting the battery for 10 sec then re enter the security code

Aug 10, 2009 | 2005 Honda Civic

1 Answer

How do i set radio stations on a stock 1994 honda civic radio?


Tune to a desired station, choose a preset button and slowly and lightly press it until the display blinks once (you may hear a beep) and the station remains tuned. I always need to do this with the vehicle stopped.

Jul 09, 2009 | 1994 Honda Civic

1 Answer

My engine light came on today on my 2003 Honda civic. what could make it come on?


If you go to Autozone they can read your code and give you a printout showing what it reads.

Jul 04, 2009 | 2002 Honda Civic

2 Answers

My 97 honda civic dx check engine light keeps coming on


Had this issue did you replace the exhaust

Jun 19, 2009 | 1997 Honda Civic

1 Answer

My 2001 honda civic reads a code P1362. what does this mean


P1362 = TDC (top dead center) sensor (1) no pulse.

Reset your car's power control module (PCM or ECU) by turning off the key and pulling the clock/backup fuse for 10 seconds then reset. Start the engine and see if the code returns. If not, it was an intermittant fault and the system is okay--but check for dirty or loose wire connector at TDC1/TDC2 sensor. If the code returns, check wiring to the sensor---if the wiring checks out, replace the sensor.

Apr 04, 2009 | 2002 Honda Civic

Not finding what you are looking for?
2000 Honda Civic Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...