At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Most cases it is in the upper hose, follow it to the block the housing the hose goes into holds the t-stat. remove bolts, pull stat replace it and put bolts back in,
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Locate the idler pulley. Loosen the nut in the center of the idler pulley. Then loosen the bolt that protrudes from the back of the pulley. This will let the belt go slack.
follow the lower radiator hose to the housing ...do not over tighten the bolts they are on an aluminum housing and the bolts will strip..dont put it in the wrong way ...the little pin that is on the valve should be up
Follow the big water hose on top of the radiator to the engine blogk. Where it goes into the block there should be 2 or 3 bolts to remove the housing. When you change the thermostat you should also change the gasket. I hope this helps.you.
You upper radiator hose connects to a flange w/ 2 screws on the engine. Unscrew the two bolts, i believe it's a 10mm, or a 12mm. Once opened, the thermostat should be there. Keep note of the orientation so you have no problems when putting a new one in.
×