Question about 1984 Chevrolet Corvette

1 Answer

Transmission my c4 1984 only runs in 1. gear. does anyone know what the problem might be. Pe.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 108 Answers

Govener gear is worn and has broken teeth on drivers side of tranny pop cover off its a circle shape on the side pull out govener order new 4 about 46 bucks and put new assembly in does not matter position

Posted on Mar 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission


Pump is internal...needs a transmission rebuild to access it. AOD transmission, need to remove major parts to access.

Jan 20, 2014 | 1994 Ford Thunderbird

1 Answer

Van has only second gear


well i would say have transmission oil and filter changed and run it a few miles before letting anyone "rebuild" transmission
thats what my experience has taught me

Nov 08, 2013 | 2000 Ford Windstar

1 Answer

I have a saab 93 and the check gear box light came on for the transmission came on and wont pull or engage gear can anyone help.


the old 9-3 have a problem with the neutral switch,its mounted on the transmission and it tells the transmission module what gear its in ,if it goes bad,the module does not know which gear its in and will not allow the car to be driven.

Apr 14, 2013 | 1999 Saab 9-3

1 Answer

Is there a fuse for transmission in a 1995 Pontiac Grand Am???


If you just had trans work done, don't use the car,
take it back & hopefully they will resolve the issue

Parts Store people are not all mechanics or shouldn't even
give out advice.

You should have a warrantee, use it

Nov 17, 2012 | 1995 Pontiac Grand Am

1 Answer

Transmission Question


It sounds to me like the transmission is starting to fail. As the clutches inside the transmission wear the clutch pack gains additional clearance. Your pressures in the transmission will be higher with cold oil so it has a tendency to build a bit of extra pressure, but it's also slower in flowing through the transmission. This results in a harder hitting first gear. As the transmission warms up, it will reduce the viscosity of the oil and work fine. Cold weather kills automatic transmissions. Let it warm up before driving it or it won't last long. It will require an overhaul soon.

Nov 13, 2012 | Mitsubishi Cars & Trucks

1 Answer

Faulty transmission solenoid symptoms: 1. transmission delay in shifting into drive and reverse > 3 seconds 2. shift from gear 1 to 2 is delayed and hard shift when I accelerate hard 3. other gears...


If this was electronic in nature the light would be on. No you have a mechanical fault in the transmission and it sounds like you will need to overhaul it.

Apr 06, 2012 | Cars & Trucks

1 Answer

1998 Dodge Grand Caravan will not shif into 2nd


Most likely the second gear section of the transmission has gone bad. There are 3 or 4 different gear sections or assemblies in an automatic transmission, when they go bad, they go bad.

Mar 06, 2010 | 1998 Dodge Grand Caravan

1 Answer

Transmission-problem. Park Avenue 89 in Norway.


Sorry the transmission on these cars are know to go bad. I think it's time for a new transmission. Check the transmission fluid and if it's dark red and seams burnt. Your transmission need to be replaced

Apr 08, 2009 | 1989 Buick Park Avenue

3 Answers

TRANSMISSION 2nd to 3rd GEAR HARDSHIFT


  1. the automatic transmission for bmw 328i 1997 move to front to rear

Jan 29, 2009 | 1997 BMW 328

9 Answers

1996 Dodge Ram Transmission shifting problem


I had the same problem with my 96 Ram 1500. I thought I was going to have to pull it out and get it rebuilt or just replace it. That was at 134,000Km it's now got 210,000 and shifting like a dream. What I did to solve the problem was this, as follows:
1. No lucas transmission Fix makes things worse.
2. Get your self a new transmission filter and gasket
3. Grab Gunk transmission medic 12oz
4. Grab 7 Liters of Valvoline ATF+4 transmission fluid (Made for chrysler transmissions)
5. Drop the trans pan and drain all the oil, clean pan and magnet
6. start truck for 5 seconds and the pump will pour out another 1 liter
7. re-install filter, gasket and pan, then add your Valvoline ATF+4
8. Add, the valvoline, transmission medic and make sure you have the right level of fluid

That solved my transmission problems, instantly it was shifting better, I no longer had to let off the gas to make it shift. Now if you have large pieces of metal on the magnet, and it's totally covered in filings, you might want to consider rebuilding the trans. My magnet had usual clutch.         

Anyhow good luck, let me know if it did the trick for you.
Justin

May 16, 2008 | 1996 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...