Question about 1994 Chevrolet Astro

1 Answer

Ignition sequence on a 1994 chevy astro van 4.3 v6

Hi, the leads are numbered 1-6 can anyone tell us the sequence they connect to the distributor? thanks

Posted by on

  • bgtracy Jun 06, 2008

    hope you can help!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,498 Answers

Firing order on a six cylinder:

1-6-5-4-3-2

Hope it helps

Mike


Posted on Jul 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 1994 chevy astro van is turning over but won't start,i installed a new coil and anew distributor but there is no spark at the coil to the distributor


their are two spark control features one is the pick up coil it's mounted under the distributor the other is in the distributor it the control module check the pink wire that plugs into the distributor for power

Aug 27, 2012 | 1994 Chevrolet Astro

1 Answer

Need firing order and distributor order for 1995 chevy astro van 4.3 liter vortec


1-6-5-4-3-2
number 1 is the front Cyl on drivers side.
then it is #3 #5
Passenger side is #2 #4 #6
#1 on distributor cap is the front side of cap next
to the hold down screw clockwise side of the screw.
Firing order goes clockwise looking down on the distribuater.

Sep 12, 2010 | Chevrolet Astro Cars & Trucks

1 Answer

Firingorder and #1 position on the distributor for a 95 ford aerostar 3.0 v6


For the 1995 Ford Aerostar Van:

For the 3.0L V6:
Firing Order:
1-4-2-5-3-6
Cylinders:
......(back)......
'..3..'.......'..6..'
'..2..'.......'..5..'
'..1..'.......'..4..'
.......(front)
Ignition Coil Connections:
(back)
3...4
2...6-This is correct!
1...5
(front)

Aug 28, 2010 | 1995 Ford Aerostar

3 Answers

I need a fire timing order for a chevy astro van v6


THE FIRING ORDER IS AS FOLLOWS : 1-6-5-4-3-2.
CYLINDER NUMBERS (front-to-rear) :
LEFT (driver side) 1-3-5
RIGHT (passenger side) 2-4-6

To set ignition timing, ensure that engine is at operating temperature, (190 degrees or above), bypass EST (electronic spark timing) by unplugging the single tan wire with a black stripe from the distributor. Ignition timing should be set at 0 degrees or TDC (top dead center). If not, loosen distributor hold down bolt and adjust, then retighten.

Mar 05, 2010 | 1993 Chevrolet Astro

1 Answer

Found TDC but rotor not on Cylinder #1?


when you bring the piston to TDC on the compression stroke
slide the distributor in and point the rotor towards the number one cylinder once you get it all back together but dont tighten the distributor down tight because you still have to adjust timing

Apr 15, 2009 | 1996 Chevrolet K1500

2 Answers

Will a transmission from a 1994 Chevy c1500 4.3 V6


sure, it should fit like a glove. same spec.

Apr 02, 2009 | 1995 GMC Suburban

1 Answer

Looking for the torque specs for 1998 chevy astro van?


1998 chevy astro 4.3 v6 torque specs include :
* foot pounds *
balance shaft (if equiped) gear bolt = step 1 = 15 ft.lbs. step2 = additional 35 degrees.
camshaft sprocket bolt = 18 ft. lbs.
connecting rod cap = step 1 = 20 ft. lbs. step 2 = additional 70 degrees.
crankshaft damper bolt = 74 ft. lbs.
crankshaft oil deflectorbolt/nut = 27 ft.lbs.
cylinder head bolts = step 1 = 15 ft. lbs. step 2 = additional 73 degrees. (tighten in sequence)
2811243.jpg


exhaust manifold bolts = step 1 = 11 ft. lbs. step 2 = 22 ft. lbs.
flywheel bolt = 74 ft. lbs.
main bearing cap bolts = step 1 = 15 ft. lbs. step 2 = additional 73 degrees.
oil filter adapter bolt = 15 ft. lbs.
oil pan bolt/nut = 18 ft. lbs.
oil pump bolt = 66 ft. lbs.
rocker arm with press in studs = 18 ft. lbs.
rocker arm with screw in studs = 19 ft. lbs.
valve lifter retainer bolt = 12 ft. lbs.
water pump bolt = 33 ft. lbs.
* inch pounds *
balance shaft retaining plate bolt = 106 in. lbs.
camshaft retainer plate bolt = 106 in. lbs.
front cover bolt = 106 in. lbs.
intake manifold upper = step 1 = 44 in. lbs. step 2 = 88 in. lbs.
intake manifold lower = step 1 = 27 in. lbs. step 2 = 106 in. lbs. step 3 = 133 in. lbs. ** (tighten bolts in sequence)

cbb8861.jpg

thanks for your vote !

Dec 28, 2008 | 1998 Chevrolet Astro

3 Answers

Distributor cap firing order 1993 chevy cheyenne truck v6


Firing order is 1-6-5-4-3-2 cyls. # 1-3-5 on drivers side front to back and cyls. # 2-4-6 passenger side front to back.

Nov 28, 2008 | 1989 Chevrolet C1500

Not finding what you are looking for?
1994 Chevrolet Astro Logo

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...