Engine trouble tell me what engine code po303 means

2000 Toyota Corolla, P0171 & P0420 codes - YouTube

? 5:43
https://www.youtube.com/watch?v=ahJnJ19-vwY
Jun 13, 2011 - Uploaded by StandardBrandParts
Standard Motor Products presents: Technician's Toolbox "2000Toyota Corolla, P0171 & P0420 codes"

Smoke testing for codes P0171 P0174 - YouTube

? 5:48
https://www.youtube.com/watch?v=kZsqEfP-5zM
Jan 18, 2011 - Uploaded by realfixesrealfast
These two codes mean a V style engine is running lean on both banks. So you have to be thinking - what can ...

How to repair fault code P0171 and reset warning light ...

? 26:31
https://www.youtube.com/watch?v=Y8FBGrCT3rM
Nov 27, 2014 - Uploaded by Peter Finn
How to repair and fix fault or error code P0171 and reset warning light Toyota Corolla VVT-i engine. ... Also how to find fault codeusing OBD scanner. ... Trouble shooting a misfire, Code P0300, P0301, P0302, P0303, P0304, P0305, P0306, ... 2000 Toyota Corolla, P0171 & P0420 codes - Duration: 5:43. by ...

Cylinder misfire

Google the code & read up

OBD PO303

Print yourself a code list for your car

PO171 OBD2 Code basically this means that an oxygen sensor in bank 1 has detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1. The P0171 is one of the more common trouble codes.

his code is triggered by the first downstream (front) O2 sensor. The sensor provides a reading of the air:fuel ratio leaving the engine's cylinders, and the vehicles powertrain/engine control module (PCM/ECM) uses that reading and adjusts to keep the engine running at that optimum ratio of 14.7:1. If something is not right and the PCM cannot maintain the 14.7:1 ratio, but rather there is too much air, it triggers this code.

I would start by replacing the spark plugs and wires

this is an obd2 code trouble table, it can help you understand the meaning of code.
for p0300, you can go here.
for p0303,you can go here.
for p0304,you can go here.
for p0134, you can go here.
for p0341, you can go here.
hope help.

PO303-cylinder #3 misfire
PO722-Output Speed Sensor No Signal

www.engine-light-help.com/generic-check-engine-light-codes.html

PO303 = Misfire detected on cylinder # 3 -- Possible need for tune up or related service Plug wires, spark plugs?. Good Luck, Ned

replace all wires and plugs with ac delco parts only iradium plugs only!!

miss fire codes need to check tune-up, proper spark at all cylinders

Hi,
A good start would be to go you the Diagnostic Trouble Codes list at http://www.bentleypublishers.com/tech/vw/vw.dtc.table.htm

The DTC's, also known as fault codes, may have other meanings but the list above should point you in the right direction.

Hope this helps - if so a rating would be really appreciated. If is doesn't then "add a comment" instead and I will try to help you further.
Cheers D..