-   The bearing in the compressor pulley is failing. You'll need a new compressor. Plan for a lot more such as a new accumalator, oriface tube, flush and charge.
-   jeffreyclay
Feb 01, 2009
-   i dont know how to change it -   Guest
Dec 04, 2008
-   the compresser was grinding and then the belt fell off. i havent got a diagram on how it goes back on and i cant figure it out any suggestions-   whitemotorcy
Sep 03, 2008
-   I just replaced the serpentine belt last year and now it broke, it didn't wear down like the last one just a clean break transverse across the belt. I suspect the A/C compressor or clutch has went out. How do I replace the compressor since I know that the system has no pressure or R-134 left in it. Thanks-   Guest
replace compressor ;remove refrigerant ;accessory belt ;electrical connectors ;suction /discharge refrigerant hose from back of compressor ;bolts from compressor and engine block ;leave bracket attached to compressor
I have a 2005 1500 HD, What is the code in the glove box for a 3.73 rear end and also the code for...
(More)
I have a 2005 1500 HD, What is the code in the glove box for a 3.73 rear end and also the code for the 4.10 axle.
Thank you, Pete, Ontario, Canada
my 2001 ford F150 is leaking water from behind the engine. from the top you cant see anything, but...
(More)
my 2001 ford F150 is leaking water from behind the engine. from the top you cant see anything, but when you look from under the truck it looks like its leaking just above the trans. what could it be
check engine light stays and blinks on a 2005 pontiac grand prix gtp and it also has vibrations as u...
(More)
check engine light stays and blinks on a 2005 pontiac grand prix gtp and it also has vibrations as u drive
My Acura Tl indicator not working and also my high beem light...Is there something I can reset and...
(More)
My Acura Tl indicator not working and also my high beem light...Is there something I can reset and my power locks not working and also I cant lock my car using my remote..