Question about 2000 Chevrolet Silverado

2 Answers

2001 Chevrolet Silverado

ABS Brake Warning light is displayed on dashboard. Check front and rear brake pads, but still good.

Posted by on

  • 2 more comments 
  • wheeler740 Oct 14, 2008

    i have a 2001 silverado and the back brakes have locked up and i cannot move the vehicle. wondering if it is the computer

  • Anonymous Mar 22, 2014

    tighten the fuel cap, that's message on the my dashboard. I got a new fuel cap but still have the engine warning on my dashboard. What should I do next?

  • Anonymous Mar 27, 2014

    have replaced master , pads, checked abs lines(elect) and abs sensors

  • Anonymous Mar 29, 2014

    bought a used 2000 silverado yesterday. test driving the light was not on. took it out yesterday and the brake light started blinking and chiming during my ride and didnt shut off.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 165 Answers

Bad sensor in one wheel, they are part of the wheel bearing. Could also be a bad abs computer module, either way, not cheap.

Posted on Jun 06, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How do I remove the old front brake pads from a 2001 silverado?

Posted on Oct 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I changed the front brake rotors and pads also the rear cyliners and shoes and bled the rear brakes but not the front because i didnt disconect the front brake lines. So why is my brake pedal so soft? and...


keep bleeding and bleed the front as well the littlest amount of air will keep pedal spongy if the abs came on after doning brakes check the abs lines and connections up front the abs lines sometimes get banged up will doing brake job the abs sensor is the wire that runs from behind the rotor to the fire wall sometimes they get hit knocked into or damaged if wiring looks good have vehicle scanned for code .the code will make it easier to pinpoint what side-- if circuit problem--or if sensor went bad most auto stores offer scanning for free

Jul 07, 2011 | 1995 Chevrolet Tahoe

1 Answer

Rear brakes not working proper. I have never liked the brakes on my 2500 chevy pickup. I bought the truck second hand. I have since replaced the front pads twice. The front pads were gone in 18,000...


e-brake pedal should go farther- is either out of adjustment or cable frozen- secondly sounds like only front brakes receiving enough pressure to "activate" properly- bleed all four brakes starting rear pass,then rear drive ,then front pass, then front drive- use plenty of fluid- bleed till fluid is clean without bubbles- will that long at first- this will insure not bubbles and no moisture- if a pro valve dies,you would have more problems- pedal would be really soft,would have both a brake light and abs warning lights

May 15, 2011 | 1995 Chevrolet Silverado 2500

1 Answer

What brake ststem do 2001 silverados have? rear brakes


Hi. Your 2001 Chevy Silverado is equipped with Antilock Brake System (ABS). You will identify also if your car is equipped with ABS by looking at the instrument panel for a yellow ABS indicator light after you turn on the ignition.

All the best!

Nov 10, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

Truck has 195,000 on it. after it has been running for a couple of min the abs light and the parking brake light both come on, brake fluid is full, has new front hubs with abs sensor in them (last year),...


Yes the rear has sensors, but seeing you just had front pads installed, I'd look for a loose or broken wire in the front first. I've installed front pads with the sensors and thought I got them installed right, come to find out they were not making good connection on the pads.

Oct 19, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

My ABS light on my 2001 Chevrolet Silverado comes on periodically, what does that mean?


WHEN ABS LIGHT COME THAT MEANS YOUR ABS BRAKE SYSTEM NOT WORKING.I WOULD CHECK FUSE AND RELAY FIRST IF ALL IS GOOD.THE DEALERSHIP HAS TO FIX.BECAUSE YOU NEED DIAGNOSTIC EQUIPMENT TO WORK ON THE ABS BRAKE SYSTEM.

Aug 16, 2010 | 2001 Chevrolet Silverado

2 Answers

I have a warning light on dashboard of peugeot 406 hdi and


sounds like a fault on traction control or abs
check the abs rings on the front drive shafts

Nov 10, 2009 | 2005 Peugeot 405

1 Answer

My Chevrolet silverado ss abs light came on?


Take the wheel off and check the brake pads, they are probably worn down, and the metal backing on the disc brake pad is rubbing against the rotor.If that is the case, the rotor will need to be replaced, or turned down if it isn't too bad.

Jul 28, 2009 | 2005 Chevrolet Silverado

1 Answer

Remove service brake system display from dashboard?


Check ABS system for codes. I have an '03 Silverado and have a faulty EBCM( Electronic Brake Control Module, "ABS module"). Can't reset anything. Only replacement of EBCM will fix it. Incidentally, if you have to replace it, you can check on Ebay for a rebuilt unit. You shouldn't have an issue with your "base" braking system though, if this is the case. ABS is electronically controlled and with or without it, your brakes will still function. I hope this helps.

Nov 12, 2008 | 2000 Chevrolet Silverado

Not finding what you are looking for?
2000 Chevrolet Silverado Logo

981 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...