Question about 2000 Lincoln Continental

1 Answer

Locked both sets of keys in my car

How can I get in my car just bought and do not know the keyless entry code. I have locked both sets in it.

Posted by on

  • Anonymous Jan 18, 2009

    2004 infiniti

    locked keys inwhile car is running?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 146 Answers

I have heard rumors that there is a number on the frame underneath the passenger side of the vehicle. Supposedly the last four digits are the unlock code. I will research and post further. You can take the VIN number to a Ford dealer and they can cut you a new key for a nominal fee.

Posted on Jun 06, 2008

3 Suggested Answers

SOURCE: key locked in car

You may still have power to the locking system via the internal lock buttons. You will have to spring the door with a wedge, reach inside with a long, narrow bar and hit the Unlock button on the door.

Posted on Jun 25, 2008

goalie39
  • 469 Answers

SOURCE: keyless entry code for 2003 lincoln aviator

Every car different, call an auto rescue or towing company, the trucks are usually equiped with slim jims, that can be used to gain access to your vehicle.

Hope this helps.
Ed

Posted on May 05, 2009

  • 3911 Answers

SOURCE: locked my keys in my

car dealers and locksmiths are the way to go on this issue. they both can be found in the yellow pages.

Posted on May 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford keyless entry code


You can't. It is located on the module or in the trunk. You are supposed to have the code before you lock the keys inside. You could try the dealer, but likely you will need to call a lock smith.

Aug 30, 2014 | Cars & Trucks

1 Answer

I have locked my keys in mt car and I don't know the keyless entry code is there a like a temporary code


you need locksmith or dealership you will need vechicle VIN NUMBER.located on a plate on top of dash visible through windshield.

Oct 21, 2012 | 2006 Ford Five Hundred

2 Answers

Locked my one set of keys in 2000 mercury marquis. How can i find the Keyless Entry code which i don't remember. I'm forgetting a lot of things!! Ha


Well the only way to do that is to look on the Keyless entry module in the car, or retrieve it with a computer which again you would need to get in the car. Your best bet is to call a lock smith and have him open it. We have a company here called Pop A Lock that will come out for i think $45

May 06, 2011 | 2000 Mercury Mountaineer

1 Answer

I cant get the keyless entry code to my 2003 mercury mountaineer. i bought the truck used so i never had the code but i locked my keys in the truck and i need the key code. is there a default code?


You will have to go to the dealer with tittle,and proof
of ownership and VIN# to get the factory code.

You should have 2 keys and a valet key, then program them,
then change the Keyless Door Code

Jan 31, 2011 | 2003 Mercury Mountaineer

1 Answer

I just bought a 2007 mkx and my son locked the keys in the car and we haven't reset the code yet. how do i unlock the car?


You don't have two keys and a valet key?

Give the VIN to the dealer,and they should get you a key or factory Keyless Entry Pad Code

May 26, 2010 | 2007 Lincoln MKX AWD

1 Answer

I don't have a manual for my 2004 lincoln Avaitor but would like to know how I can change the code on the drives door key pad


KEYLESS ENTRY SYSTEM With the keyless entry keypad, you can: • lock or unlock the vehicle doors without using the key. Your vehicle has a factory set 5 digit code that operates the keyless entry system. You can also program your own 5 digit personal entry code. The factory-set code is located: • on the owner's wallet card in the glove compartment • or at your dealer. When pressing the controls on the keyless entry keypad, press the middle of the controls to ensure a good activation. This system will disable the power door lock controls. These will not work until the vehicle is disarmed. Programming your own personal entry code To program your own code: 5. Enter factory set code (keypad will illuminate when pressed). 6. Press 1/2 control within five seconds of step 1. 7. Enter your personal 5 digit code. Enter each digit within five seconds of previous one. 8. After the code is entered, the locks will cycle, confirming that the new code has been set. Do not set a code that includes five of the same number or presents them in sequential order. Thieves can easily figure out these types of codes. Your personal code does not replace the permanent code that the dealership gave you. You can use either code to unlock your vehicle. If a second personal code is entered, the module will erase the first personal code in favor of the new code. Locks and Security 149 Locks and Security If you wish to erase your personal code, use the following instructions: 1. Enter factory set code. 2. Press 1/2 control and release. The system will now only respond to the factory set code. Anti-scan feature The anti-scan feature prevents repeated attempts at arriving at a valid key code. The keyless entry pad is disabled for 1 minute after 7 unsuccessful attempts (35 consecutive button presses) at entering a valid key code. The keypad will flash during this 1 minute mode. However, the 7/8 and 9/0 controls will still lock the vehicle. Anti-scan will be turned off after: • one minute of keypad inactivity. • the remote entry transmitter UNLOCK button is pressed. • the ignition is turned to the ON position. Unlocking the doors with the keyless entry system To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will also illuminate. To unlock all doors, enter the factory set code or personal code (driver door unlocks) and press the 3/4 control within five seconds. Locking the doors with the keyless entry system It is not necessary to enter the factory or personal code prior to locking all doors. To lock the doors: • with the driver's door closed, press the 7/8 control and the 9/0 control at the same time.

Dec 17, 2009 | 2004 Lincoln Aviator

1 Answer

How do you reprogram the keyless door lock code?


  1. Enter the five digit permanent entry code into keyless entry keypad.
  2. Within five seconds of pressing last button of permanent code, press the 1/2 button within five seconds of pressing the last button of the permanent code. (Factory code found on the module).
  3. Enter any alternate five digit code within five seconds of pressing 1/2 button.
    • Enter a sixth digit as follows to indicate operator's memory seat setting to be set by alternate code: 9/0-- no memory recall
      1/2-- memory seat position 1
      314-- memory seat position 2
      5/6-- memory seat position 3
    • After successful programming, the doors will signal by locking and then unlocking.

The Keyless Entry Module is located inside the drivers side door.

Jun 21, 2009 | 1985 Lincoln Town Car

1 Answer

Keyless Entry and Remote


I have had this problem take you drivers door put your key and un-lock from the out side with key (NO) then open the door push un-lock from the inside button and then set from you remote and it should set if not push un-lock then lock and then do the un-lock with the key. Let me know if that works. what my car did was locked from the inside and I had the problem were it would not work till I un-locked from the out side plus I had to go to radio shack and change the battery from the control.
Hope good happens.
Nikki2913

Oct 22, 2008 | 1996 Ford Explorer

3 Answers

Keyless entry


I believe dealer has to re-program the new code.

Aug 29, 2008 | 2001 Ford Explorer Sport Trac

2 Answers

Keyless door pads


Go to www.customersaskford.com - type in the text box - keyless entry - then press the "ask" button

Jun 21, 2008 | 2002 Mercury Mountaineer

Not finding what you are looking for?
2000 Lincoln Continental Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...